« previous next »
Pages: [1]   Go Down

Author Topic: scope rings for a Stevens 200  (Read 1554 times)

0 Members and 1 Guest are viewing this topic.

Offline gypsyman

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 4850
scope rings for a Stevens 200
« on: March 02, 2011, 03:54:48 AM »
Got a pretty good deal on a Stevens 200 in .308. And am planning on putting a Bushnell Elite 3200, 5x15x 40mm tactical on it. And, was just wondering if anybody has a scope simialr to this on their 200. I think medium hieght rings will get it up high enough. I used a pair of Weaver detachable rings, with the dual top caps on my .270, and it worked out pretty well. Any thoughts or suggestions?? Thanks-gypsyman
Logged
We keep trying peace, it usually doesn't work!!Remember(12/7/41)(9/11/01) gypsyman

Offline STRANGE1

  • GBO Supporter
  • Trade Count: (1)
  • Avid Poster
  • *****
  • Posts: 107
Re: scope rings for a Stevens 200
« Reply #1 on: March 02, 2011, 04:55:04 AM »
I have a 42mm tasco target on my stevens 223.  mounted with a 1 piece base (EGW) and leupold medium rings.  i love it, sits very low but too low.
Logged

Offline helotaxi

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 375
Re: scope rings for a Stevens 200
« Reply #2 on: March 02, 2011, 04:53:26 PM »
A lot is going to depend on the base.  I have a Bushnell 4200 3-12x44 with an EGW base and Burris XTR low rings were high enough.  I have a 40mm obj Bushnell mounted on two-piece Weaver bases and medium Burris signature rings and it is also about right.  Those same rings with an EGW base are a little on the high side.
Logged

Offline godale

  • Trade Count: (0)
  • Member
  • *
  • Posts: 45
Re: scope rings for a Stevens 200
« Reply #3 on: March 04, 2011, 11:47:46 AM »
that combo will work but you will need the egw one piece mount. if you are on a budget weaver makes a 1 piece mount for savage. got a bushy 4x12x40 with the weaver base and med rings on mine
Logged
Pages: [1]   Go Up
« previous next »