« previous next »
Pages: [1]   Go Down

Author Topic: Need help with a 110C!!!!  (Read 568 times)

0 Members and 1 Guest are viewing this topic.

Offline Feddog82

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 129
Need help with a 110C!!!!
« on: March 21, 2011, 05:51:01 PM »
So, let's say hypothetically that I have purchased a 110C action that includes everything but the barrel and stock.  I have found that I can get a stock and I would like to purchase a new precision barrel from a manufacturer that has bot been decided yet.  Problem is that I do not know exactly what caliber this was configured for from the factory.  The person that I got it from said it was for .308 however I do not know if that is a definate.

This rifle is a LA as all 110s are and since it is a 110C it has a detachable mag.  The mag seems to be for a long action cartridge however I am not positive.  Is there anywhere I can go on the net to plug in my serial number and find out exactly what this rifle was from the factory?  If not then is there any reason that I would not be able to build this into a .260rem if it was originally chambered for .30-06 or something of that family?  If it indeed was chambered for a LA cartridge would I be able to cycle a SA cartridge through this detachable mag?

I have more questions but I will await some answers before asking more.

Thanks
Logged

Offline av-doctor

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 238
  • Gender: Male
Re: Need help with a 110C!!!!
« Reply #1 on: March 22, 2011, 02:15:26 PM »
as far as the barrel there is a few different threads ,trigger for any 110 should work,stock you'll have to measure the distance between action screws to get correct stock,you might have to change the bolt head to get your bolt to work,do you have the mag if so try a few different rounds to see what works,a good source of info and parts is sharp shooter supply they specialize in savage rifles,i personally have never dealt with them but i hear cs is hit and miss
Logged

Offline helotaxi

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 375
Re: Need help with a 110C!!!!
« Reply #2 on: March 22, 2011, 07:24:50 PM »
The bolt head is the same between the '06 and .308 family of cartridges so that should not be an issue.  Feeding from the mag *might* be an issue if the mag is indeed from a long action but probably not.  Measure the recess in the bolt head.  If it's right at 0.473" you should be able screw on any barrel chambered for an '06 or .308 family cartridge.
Logged

Offline Feddog82

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 129
Re: Need help with a 110C!!!!
« Reply #3 on: March 24, 2011, 12:17:51 PM »
It is not right on at .473, it has an extra .003 of depth.  Is that normal for the 06 and 308 family cartridges?
Logged
Pages: [1]   Go Up
« previous next »