Author Topic: Ruger Single Six in 32 H&R Mag.  (Read 3267 times)

0 Members and 1 Guest are viewing this topic.

Offline DakotaElkSlayer

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 898
Ruger Single Six in 32 H&R Mag.
« on: March 22, 2011, 05:55:12 PM »
  Is there anything you folks can tell me about the Single Six in 32 H&R mag with adjustable sights?  Just picked up one in trade today and was wondering if they tended to have overly-tight throats, or anything like that.

Thanks,

Jim
He who joyfully marches in rank and file has already earned my contempt. He has been given a large brain by mistake, since for him the spinal cord would suffice.

- Albert Einstein

Offline DennisB

  • Trade Count: (42)
  • Contributor
  • ***
  • Posts: 456
Re: Ruger Single Six in 32 H&R Mag.
« Reply #1 on: March 23, 2011, 02:39:44 PM »
They're fun shooters.  I have a 5.5" barreled one. (had two others but buddies keep hounding me to sell to them).  Ammo may be less common than you'd like, unless you reload.  I don't think I'd call the throating anything but just fine.   I'll never let this one go, but would like to add one of those newer 327 mag versions, just because, well, I don't have one-- ;)
Dennis In Ft Worth

Offline AJAX

  • Trade Count: (0)
  • Member
  • *
  • Posts: 25
Re: Ruger Single Six in 32 H&R Mag.
« Reply #2 on: March 23, 2011, 03:01:24 PM »
I believe mine has .310 throats.  Brian Pierce reviewed a fixed sight one that also had .310 throats.   Cylinder Smith (out for medical reasons right now, anyway) reams to .314.  I believe he said it was SAAMI.  The problem is that bullets run .312.  I didn't find that to be a big deal with jacketed but lead didn't shoot quite as well.  Perhaps you can find a smith who will ream to .3125?  Hope this helps.

Offline DakotaElkSlayer

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 898
Re: Ruger Single Six in 32 H&R Mag.
« Reply #3 on: March 23, 2011, 06:07:41 PM »
  Thanks guys!  I started off shooting with the Ruger 45 colts and both my pistolas had really tight throats that cylindersmith reamed for me to shoot cast.  Love shooting cast, but maybe I will start with jacketed and see how things go.  Always wanted one of these older models...definitely worth the Walther P22 I traded; always can go into any shop and pick another up if I want.

Jim
He who joyfully marches in rank and file has already earned my contempt. He has been given a large brain by mistake, since for him the spinal cord would suffice.

- Albert Einstein

Offline Lloyd Smale

  • Moderator
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18285
Re: Ruger Single Six in 32 H&R Mag.
« Reply #4 on: March 24, 2011, 12:45:14 AM »
mine was 310 and i opened it to 3125. There great shooting guns and to be honest mine shot just as well at 310.
blue lives matter

Offline bilmac

  • GBO Supporter
  • Trade Count: (14)
  • Senior Member
  • *****
  • Posts: 3560
  • Gender: Male
Re: Ruger Single Six in 32 H&R Mag.
« Reply #5 on: March 24, 2011, 01:03:37 AM »
I had wanted one for several years and finally found a used one with adjustable sights so it came home with me. The gun was fine I couldn't fault it, but I never could shoot it very well. I have the same problem with my 22 cal single six. I can shoot my blackhawks much better.  I blame the difference on the weight. 

Also when I actually started loading the H&R Mag, I was disappointed in it's performance.

Offline DakotaElkSlayer

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 898
Re: Ruger Single Six in 32 H&R Mag.
« Reply #6 on: March 24, 2011, 04:06:31 PM »
mine was 310 and i opened it to 3125. There great shooting guns and to be honest mine shot just as well at 310.

What bullets and size were you shooting with the tighter throats?

Jim
He who joyfully marches in rank and file has already earned my contempt. He has been given a large brain by mistake, since for him the spinal cord would suffice.

- Albert Einstein

Offline flatgate

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 158
Re: Ruger Single Six in 32 H&R Mag.
« Reply #7 on: March 27, 2011, 05:47:41 AM »
I have three of the .32 mag. cal. New Model Single-Sixes.



6-1/2" and 9-1/2". 



5-1/2"

All shoot very well with 115-118 gr. cast bullets loaded over WW-296 and I usually use Small Rifle primers.

flatgate

Offline hunterspistol

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 196
  • You mean this isn't the road to the shooting range
Re: Ruger Single Six in 32 H&R Mag.
« Reply #8 on: March 28, 2011, 02:51:14 PM »
     Y'all shouldn't have shown me that! Now, I'll have to have one.  I have a TC and an NEF in 32 magnum.  If you want to shoot lead with less trouble, I pour mine and size to .314.  The oversize shoots better.  We've been using the RCBS 32-098-SWC with good results in any firearm. 

     1.9 grains of Bullseye will get you 100 yards with repeatability. 
      1.4 grains of Bullseye will get you close range extreme accuracy out to 50 yards.
"It is well enough that people of the nation do not understand our banking and monetary system, for if they did, I believe there would be a revolution before tomorrow morning."
Henry Ford

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Ruger Single Six in 32 H&R Mag.
« Reply #9 on: April 17, 2011, 03:08:02 PM »
IIRC, Skeeter found that he got better ballistics with factory 32mag than factory 32-20 in a S-Six.
Hand loads were no slouch in the mag, but he could best them in 32-20.
I know the mag would do all I want in a 32 cal. revolver.
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Larry Gibson

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1069
Re: Ruger Single Six in 32 H&R Mag.
« Reply #10 on: April 20, 2011, 05:57:40 PM »
I've a 6 1/2" barreled Single Six .32 H&R Magnum also.  The throats are .3105.  Starline cases with .312 sized cast and .32 S&WL with .314 sized bullets chamber easily.  Accuracy with both is excellent so it ain't broke and I'm not going to "fix" it.  I use Lee's TL314090-SWC or Hornadys commercial swaged SWC over 3.2 gr Bullseye as my most used load.  Lymans 311316 GC 32-20 bullets is excellent for a "heavy" but I mostly use the Lyman cast bullet designed for the .32 H&R, 313631 (105 gr GC'd SWC), as my mainstay "magnum" bullet.  Accuracy with it is also excellent.

Larry Gibson

Offline Lloyd Smale

  • Moderator
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18285
Re: Ruger Single Six in 32 H&R Mag.
« Reply #11 on: April 21, 2011, 02:37:48 AM »
lbt 120 rfgc, ballistic cast 115 swcgc/105swc  rcbs 98swc. I looked at my records and i was mistaken the throats on it were .311 when i bought it.
mine was 310 and i opened it to 3125. There great shooting guns and to be honest mine shot just as well at 310.

What bullets and size were you shooting with the tighter throats?

Jim
blue lives matter

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Ruger Single Six in 32 H&R Mag.
« Reply #12 on: April 21, 2011, 05:41:01 PM »
Larry, I just gave that Bullseye load a try in my Colts Army Spl 32-20 this afternoon, works pretty nice. It is not too hot at all, and probably a cream puff in a strong revolver, and I doubt it will lead. It seems close to POA too, but those old fine sights and my aging eyes just aren't working too well anymore. Shame, it's a nice, tight, and well timed old piece.
Anyway, don't anybody be reluctant to try that load in a Maggie or 32-20.
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974