357 Max ammo storage

[tcrace]

For loaded 357 maximum ammo storage I have MTM 50 round boxes labelled "17/223 REM, 222 REM MAG, 204 Ruger" with a piece of 3/8" closed cell foam in the lid to take up the extra space. What do you all use? Are there ammo boxes specifically made for 357 maximum rounds?

Thanks
Tim

[curteric]

I have several that are from J & J. They are for 22 Hornet and 357 Max.

[gypsyman]

curteric +1 gypsyman

[irold]

I have several , a frankford brand box.  Its specifically made for the 357 max along with  a few other calibers , all marked on the bottom.  Another box, a MTM brand , is labled 22-250 , 223 and a host of other calibers.  It doesn't mention 357 max , but they do work , perhaps a little off in size but certainly useable.  Hope this helps.
BTW , the MTM brand seems to be a much better box.  omho
regards , irold

[tcrace]

Thanks for the replies. I'll check out the J&J and Frankford cases.

[schuetzen]

I have several that are from J & J. They are for 22 Hornet and 357 Max.

Thanks for pointing this out.  I was wondering about 357 Max boxes myself just the other day.

http://www.jandjproducts.com/proddetail.php?prod=22-100

[cwlongshot]

I have several , a frankford brand box.  Its specifically made for the 357 max along with  a few other calibers , all marked on the bottom.  Another box, a MTM brand , is labled 22-250 , 223 and a host of other calibers.  It doesn't mention 357 max , but they do work , perhaps a little off in size but certainly useable.  Hope this helps.
BTW , the MTM brand seems to be a much better box.  omho
regards , irold

This is the ones I like to use as well.

 The 22H boxes work too, but not as well as the J&J or Frankfort boxes do.

CW

[curteric]

I was at Gander Mtn. today and they had MTM 50 round boxes for 38/357 with slip covers (not hinged)
that would work. I use the same style for my .445 super mag, they are labeled for 44 special/ 44 Mag.  I also took a loaded round to the store and tried boxes to find one that worked . I have a couple of 100 round hinged lids that read 6mm 7mm Benchrest that work for my .445.

[Flemc1]

30 carbine 50 rnd boxes work just dandy too 

Chris ;