Author Topic: GBO Reamers Available for Rent (Read 48732 times)

quickdtoo · « **Reply #30 on:** January 16, 2012, 01:18:06 PM »

There are three ahead of you.

Tim

bikerbeans · « **Reply #31 on:** January 19, 2012, 09:11:08 AM »

Tim,

Would the crown cutter work with a 44 or 45 cal pilot, assuming someone, like me, bought the pilot?

BB

quickdtoo · « **Reply #32 on:** January 19, 2012, 10:17:09 AM »

No, it cuts a recess that's about .400" wide, I wouldn't use in on anything over .30 cal.

Tim

kevinsmith5 · « **Reply #33 on:** January 22, 2012, 08:55:56 AM »

What barrel would you use?

Sent from my Kindle Fire using Tapatalk

kevinsmith5 · « **Reply #34 on:** January 22, 2012, 02:14:03 PM »

What barrel would you use for a 5.7?

Sent from my Kindle Fire using Tapatalk

quickdtoo · « **Reply #35 on:** January 22, 2012, 06:35:37 PM »

It's been discussed some before, once in this topic, see reply #19!! http://www.gboreloaded.com/forums/index.php/topic,231528.msg1099377031.html#msg1099377031

Tim

http://www.gboreloaded.com/forums/index.php/topic,178932.msg1098859566.html#msg1098859566

http://www.gboreloaded.com/forums/index.php/topic,91419.msg557611.html#msg557611

Brewster · « **Reply #36 on:** January 30, 2012, 06:11:41 AM »

Is the 30 cal. crown cutter available? Is it step crown or 11 degree?

quickdtoo · « **Reply #37 on:** January 30, 2012, 06:20:14 AM »

It's out to a member right now, it's made for a .22 cal, I added a .30 cal pilot from PTG, cuts a slight recess on a .30 cal barrel, here's a pic of a 223 barrel I crowned with it, the recess is ~.400" wide, and a pic of the tool with a .379" pilot I made to do a couple 38-55s, it's more of a facer and crown cutter on 30 cal and bigger.

Tim

Brewster · « **Reply #38 on:** January 30, 2012, 06:28:51 AM »

Dandy. I'll send you a PM (if I didn't already) and get in que.

quickdtoo · « **Reply #39 on:** January 30, 2012, 06:31:56 AM »

You already PM'd me and are in the que, the only one waiting as a matter of fact.

Tim

Brewster · « **Reply #40 on:** January 30, 2012, 06:35:26 AM »

LOL. Well, I thought that I had, but the old grey matter ain't workin' the best today.

ratdog · « **Reply #41 on:** February 08, 2012, 11:53:12 PM »

i know this has been posted before can a standard bolt action marlin 22 be reamed to 22 mag or is mag to long and what about a single shot. break open answers would be apreciated.

tacklebury · « **Reply #42 on:** February 09, 2012, 03:14:26 PM »

Far as I know, unless it's one of the cheapie lined .22 barrels, you should be able to ream any of the steel or s/s barrels to .22 magnum. The one thing you have to be careful of is if it's a .22 semi-auto, you HAVE to increase the spring strength to offset the stronger rounds. It's not really recommended in a semi anyway, but bolts should always be strong enough to have no issue. It's just a lot easier to ream break opens, because you don't need an extension to get through the bolt area.

geartow · « **Reply #43 on:** February 14, 2012, 02:53:28 AM »

Do the reamers come with a set of instuctions and are they fairly fool proof ?

quickdtoo · « **Reply #44 on:** February 14, 2012, 04:40:42 AM »

Yes, they're also in the FAQs and in the 357Maxi reamer thread.

Tim

MSP Ret · « **Reply #45 on:** April 01, 2012, 03:47:53 PM »

Hello Tim, would you please put me on the list for the .357 Max reamer...Thanks....<><....

quickdtoo · « **Reply #46 on:** April 02, 2012, 05:23:45 AM »

In the mail today!!

Tim

wvrealtor · « **Reply #47 on:** April 20, 2012, 05:33:10 AM »

First post on this board. I have been lurking for awhile and the info about the handi rifles is great.

I would like to rent the 357 max reamer. I will PM with shipping info.

Thanks,
Stephen

vtx- · « **Reply #48 on:** May 07, 2012, 03:31:34 PM »

pm sento 357 maxi reamer.

srussell · « **Reply #49 on:** June 15, 2012, 04:21:17 PM »

could you put me down for the 45-70 throater

rdlange · « **Reply #50 on:** July 03, 2012, 02:22:37 PM »

I'd like to try paper patch in my 45-70. PM sent about 45-70 throater.

CO2Gunner · « **Reply #51 on:** July 07, 2012, 09:01:13 AM »

PM'ed for the 357 max reamer waiting list. Thanks.

trotterlg · « **Reply #52 on:** July 21, 2012, 10:42:36 AM »

Tim: I just got, in trade for a stub job, a new PTG 30-30 AI reamer, looks to be new. It also came with a "T" handle. If you want it for the reamer rental pool I will donate it to the cause. PM me you're address again if you are the keeper of them and want it. Larry

quickdtoo · « **Reply #53 on:** July 22, 2012, 02:54:24 AM »

Works for me and Graybeard, thanks Larry!!

Tim

lee1954 · « **Reply #54 on:** July 24, 2012, 02:15:38 PM »

Can I get on the list waiting for the 357 max please? Dan

kevinsmith5 · « **Reply #55 on:** July 24, 2012, 02:19:25 PM »

Quote from: lee1954 on July 24, 2012, 02:15:38 PM

Can I get on the list waiting for the 357 max please? Dan

PM Quick (forum moderator).

Sent from my Kindle Fire using Tapatalk 2

casca1 · « **Reply #56 on:** August 11, 2012, 07:42:39 PM »

casca1 would like use of the 454 casull when available
thanx
kerry

quickdtoo · « **Reply #57 on:** August 12, 2012, 04:12:38 AM »

Please following the instructions at the top of page one.

Tim

Vincent · « **Reply #58 on:** September 18, 2012, 02:53:10 PM »

Is the K-Hornet being used? My daughter's NEF SuperLite would like to grow up a little.

I have RCBS Dies from years ago. Use them sometimes to heck size 22 Hornet for my 527 CZ American

quickdtoo · « **Reply #59 on:** September 19, 2012, 04:10:26 AM »

It's available.

Tim