Author Topic: Pardner Pump scope base  (Read 13989 times)

0 Members and 1 Guest are viewing this topic.

Offline kingj

  • GBO Supporter
  • Trade Count: (53)
  • Avid Poster
  • *****
  • Posts: 208
  • Gender: Male
Pardner Pump scope base
« on: April 07, 2011, 08:43:32 AM »
Anyone know what will fit?
Character 24 hours a day 7 days a week !

Life Member NRA
.357 Handi
.35 Handi

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: pardner scope base
« Reply #1 on: April 07, 2011, 11:36:12 AM »
Pardner or Pardner Pump, two different critters? Good luck on finding the Pardner Pump scope rail.  :-\

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: pardner scope base
« Reply #2 on: April 07, 2011, 02:50:49 PM »
Call Brownells; they can check their info on the radius of what they have available if not an actual rail fit to use.
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline kingj

  • GBO Supporter
  • Trade Count: (53)
  • Avid Poster
  • *****
  • Posts: 208
  • Gender: Male
Re: pardner scope base
« Reply #3 on: April 08, 2011, 02:11:05 AM »
This is for the pumpgun. I called c/s and they don't supply anything except Handi bases. and had no idea what would work.
We have a million dollar plus machine shop where I work,and a gun crank as one of the machinists.I'll buy him some lunch!!
Character 24 hours a day 7 days a week !

Life Member NRA
.357 Handi
.35 Handi

Offline zackyholdem

  • Trade Count: (9)
  • Avid Poster
  • **
  • Posts: 188
Re: pardner scope base
« Reply #4 on: April 09, 2011, 01:09:55 PM »
i use the handi bases on my pardner pumps, you just have to get three screws that are a tad bit longer than the one supplied with the scope rail, had one on for 3 years and put over 300rds 12ga slugs thru it and it never came loose 
When freedom shivers in the cold shadow of true peril, Its always the patriots who first hear the call. - Charlton Heston

Handi's -30-06, 223 Ultra, 7mm-08, 44 mag, 45-70, 17hmr, Tracker II 12ga, Pardner 10ga (2)12ga's and .410

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: pardner scope base
« Reply #5 on: April 09, 2011, 04:06:57 PM »
Brownells has T-10 Torx head 6-48 screws that are 3/8" long if the thread size is the same as the Handi, I wouldn't be surprised if they're metric tho, the PP is made in PRC.

Tim

http://www.brownells.com/.aspx/sid=3583/pid=41830/Product/T_10_Refill_Pak_6_48x3_8_xWH_fits_Weaver_Base
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline zackyholdem

  • Trade Count: (9)
  • Avid Poster
  • **
  • Posts: 188
Re: pardner scope base
« Reply #6 on: April 10, 2011, 02:16:04 PM »
Brownells has T-10 Torx head 6-48 screws that are 3/8" long if the thread size is the same as the Handi, I wouldn't be surprised if they're metric tho, the PP is made in PRC.

Tim

http://www.brownells.com/.aspx/sid=3583/pid=41830/Product/T_10_Refill_Pak_6_48x3_8_xWH_fits_Weaver_Base

yes, the threads are the same as those on the standard handi's
When freedom shivers in the cold shadow of true peril, Its always the patriots who first hear the call. - Charlton Heston

Handi's -30-06, 223 Ultra, 7mm-08, 44 mag, 45-70, 17hmr, Tracker II 12ga, Pardner 10ga (2)12ga's and .410

Offline kingj

  • GBO Supporter
  • Trade Count: (53)
  • Avid Poster
  • *****
  • Posts: 208
  • Gender: Male
Re: pardner scope base
« Reply #7 on: April 11, 2011, 08:13:06 AM »
Thanks for the info.  jk
Character 24 hours a day 7 days a week !

Life Member NRA
.357 Handi
.35 Handi

Offline kingj

  • GBO Supporter
  • Trade Count: (53)
  • Avid Poster
  • *****
  • Posts: 208
  • Gender: Male
Re: pardner scope base
« Reply #8 on: April 22, 2011, 03:23:35 AM »
The handi mount works just fine! As I mentioned I have access to a machine shop,so we are milling just enough material to be flush with the top of the screw heads to allow the bead to be seen if the scope is removed.The suppled screws worked fine,without having to get longer ones. Thanks for the info previously provided
Character 24 hours a day 7 days a week !

Life Member NRA
.357 Handi
.35 Handi