Author Topic: What powder?  (Read 637 times)

0 Members and 1 Guest are viewing this topic.

Offline lonwolf

  • Trade Count: (6)
  • Member
  • *
  • Posts: 48
What powder?
« on: April 20, 2011, 06:18:01 AM »

What powder should i use for 44 sp. it will be used in a single shot rifle (cva scout ) also which drop tube and wads   
                                   Thanks Frank             

Offline Ranch13

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1062
  • Gender: Male
    • Historic Shooting .com
Re: What powder?
« Reply #1 on: April 20, 2011, 12:44:33 PM »
3f powder, any thin wad will do, whether it be wax paper or cereal box, or a commecial .030 fiber wad.
 Drop tube won't help much with this one there's not that much room for powder, just use a  slow pour from thru your funnel seat the wad and if use the bullet to finish compressing the load.
 Most important is going to be using a good bp lube. Bullshop Nasa, and Sagebrush Alox are my favored bp lubes.
In the 1920's "sheeple" was a term coined by the National Socialist Party in Germany to describe people that would not vote for Hitler. In the 1930's they held Hitler as the only one that would bring pride back to Germany and bring the budget and economy back.....

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Re: What powder?
« Reply #2 on: April 28, 2011, 04:12:16 PM »
Does that rifle have a 44 spl chamber or 44 mag? If it is the longer it'll likely shoot better with longer cases. I don't droptube 44 spl. just throw charges and compress it about 1/16" with the bullet. FF or FFF work, FFF is more powerful. Either is great fun in my Blackhawk 44 spl. - the other shooters at the range usually stop and watch after the first shot. Sure sounds better than their puny 9mm popguns!
"Give me a lever long enough, and a place to stand, and I'll break the lever."