Author Topic: 1884 Springfield  (Read 705 times)

0 Members and 1 Guest are viewing this topic.

Offline baer19d

  • Trade Count: (18)
  • Contributor
  • ***
  • Posts: 270
1884 Springfield
« on: April 23, 2011, 08:53:05 PM »
I just picked up an 1884 Springfield trapdoor rifle w/ bayonet for $400. There is no rust or pitting on the outside and it has that nice patina and the wood is in good shape. The bore isn't perfect but thats to be expected. The lands are still bright for the most part but the groves are a bit rusted. I think it will still shoot OK. I hope to find out in the next day or two.

Offline Mikey

  • GBO Supporter
  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
Re: 1884 Springfield
« Reply #1 on: April 24, 2011, 02:37:37 AM »
baer:  If you just picked a 1884 made Trapdoor Springfield for only $400, complete with bayonet and without rust, you have secured yourself a great purchase.  You did not specify the caliber but if 45-70, you found a great deal.  Let us know how it shoots. 

Offline Curtis

  • GBO Supporter
  • Trade Count: (65)
  • Senior Member
  • *****
  • Posts: 1131
Re: 1884 Springfield
« Reply #2 on: April 24, 2011, 09:02:22 AM »
Yup, super deal.  I gave close to double that for mine last year.  Still haven't had a chance to shoot it though.

Curtis
Lord, please help me to be half the man my dogs think I am.

Contender in 17 Rem, 22lr, 22k Hornet, 223 Rem, 256 WM, 6TCU, 7TCU, 7-30, 30 Herrett, 300 Whisper, 30-30 AI, 357 mag, 357 Herrett, 375 JDJ, 44 mag, 45/410..... so far.

Offline Tackleberry

  • GBO Supporter
  • Trade Count: (3)
  • Avid Poster
  • *****
  • Posts: 193
  • Gender: Male
  • That's not a gun---This is a gun....
    • mil
Re: 1884 Springfield
« Reply #3 on: April 25, 2011, 06:32:57 AM »
Recommendation:  Carefully pull the action out of the stock....and check to see there are no cracks on the bottom of the receiver. And, I would not use Factory .45-70 ammo unless it's loaded with black powder of low pressure substitute. Although Remington is supposed to be safe, Pressure max on these rifles is around 18,000 PSI....pretty low...I recommend reloading for your own use...check out 5744 powder which is smokeless but safer in these receivers, and 777, and Blackthorn powder also....as well as good old Blackpowder. Worn barrels will still shoot pretty good with soft lead bullets.  I shoot two model Trapdoors and use the above with good results and safety..
David Berry
LCDR USN (ret)
NRA Life member
Texan by birth and the grace of GOD
OLE MISS graduate

Offline baer19d

  • Trade Count: (18)
  • Contributor
  • ***
  • Posts: 270
Re: 1884 Springfield
« Reply #4 on: April 25, 2011, 08:46:12 PM »
Well I took the gun out and it shot great. It really liked 415gn cast and it also did well with some 300 Sierra HP's that I had lying around. I only shot it at 25yrds because I took my daughter with me and thats the range she was shooting at but it held about at 2 inch group. I  look forward to shooting it at longer ranges someday. The rounds I shot out of it today really did a good job of cleaning out some of the rust that was in the barrel.

Offline The Pistoleer

  • GBO Supporter
  • Trade Count: (0)
  • Avid Poster
  • *****
  • Posts: 229
Re: 1884 Springfield
« Reply #5 on: April 27, 2011, 05:21:48 PM »
The bayonet alone is worth around a $100.00

Pete
Pete

NRA Endowment Life

Be Safe,Have fun