« previous next »
Pages: [1] 2   Go Down

Author Topic: Powder for .223  (Read 1484 times)

0 Members and 1 Guest are viewing this topic.

Offline Star1pup

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 591
Powder for .223
« on: April 24, 2011, 05:37:33 AM »
I just got a .223 Tikka with a 1:8 rifling twist and will start working up a load.  I go by the data provided by maunfacturers, but has anyone found a powder they really like for a .223?  I'm hoping to use a 55 gr. bullet, but I've been told that the 1:8 twist requires a heavier bullet.

Any suggestions?
Logged

Offline necchi

  • GBO Supporter
  • Trade Count: (40)
  • Senior Member
  • *****
  • Posts: 1842
  • Gender: Male
Re: Powder for .223
« Reply #1 on: April 24, 2011, 07:21:08 AM »
With that twist and bullet, I'd step on the throttle an use H4895 or BenchMark.
( I live in MN with vast temp swings and like the temp insensitive Hodgdons Extreme Powders)

 Otherwise a search at Hodgons website will give you a list of several Hodgdons, IMR and Winchester powders used for the 223
Logged
found elsewhere

Offline Tom W.

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1294
  • Gender: Male
  • Warning... Does not play well with others!
Re: Powder for .223
« Reply #2 on: April 24, 2011, 07:27:42 AM »
Varget
Logged
Tom
Alabama Hunter and firearms safety instructor

I really like my handguns!

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: Powder for .223
« Reply #3 on: April 24, 2011, 09:02:29 AM »
Quote from: Star1pup on April 24, 2011, 05:37:33 AM
I just got a .223 Tikka with a 1:8 rifling twist and will start working up a load.  I go by the data provided by maunfacturers, but has anyone found a powder they really like for a .223?  I'm hoping to use a 55 gr. bullet, but I've been told that the 1:8 twist requires a heavier bullet.

Any suggestions?

I've found Ramshot's TAC to do a very good job with bullets between 55 & 69 grain in my Stevens 200 with a 1 in 9 twist barrel , also IMR 4895 does well too .

stimpy

PS - Never had much luck with Varget , yet many love it .  ???
Logged
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline yooper77

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 1746
  • Gender: Male
Re: Powder for .223
« Reply #4 on: April 24, 2011, 09:18:29 AM »
I reload the 223 Remington for my T/C Encore 24" 1-12" twist rifle barrel.

I have successfully used IMR-3031 with Remington soft point 55 grain and H-4895 with Hornady soft point and Nosler Partition 60 grain bullets producing excellent accuracy.

My 12 year old daughter used this barrel with the Nosler bullet to bag her first whitetail (7 points) buck this past Sept 2010 Michigan youth hunt.

yooper77
Logged

Offline Wyo. Coyote Hunter

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1839
Re: Powder for .223
« Reply #5 on: April 24, 2011, 09:31:00 AM »
 ;)H4895 has been my standard powder for the 223...Varget also works well with lighter bullets in my rifle, but it has a slower twist...
Logged

Offline Star1pup

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 591
Re: Powder for .223
« Reply #6 on: April 24, 2011, 09:47:08 AM »
Appreciate all of the excellent info.  Do you guys think the 55gr bullet is too light?
Logged

Offline Old Syko

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2263
  • Gender: Male
Re: Powder for .223
« Reply #7 on: April 24, 2011, 10:13:21 AM »
55s through a 1-8 seems to be a waste of resources in my book.  68s or even heavier pushed by 4895 are more in line with the rifles capability.  At least they work well for me.  Especially when looking at longer distances.
Logged

Offline 1sourdough

  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1003
  • Gender: Male
Re: Powder for .223
« Reply #8 on: April 24, 2011, 10:38:22 AM »
 I think you could start out with 55 grain bullets. My powder choices for 55 grn would be TAC & H4895. Of course there are many good choices with 223 powder. I look for a powder I can use in other loadings & then buy in bulk, 8 lbs or so.
Logged
NRA, Veteran

Offline Wyo. Coyote Hunter

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1839
Re: Powder for .223
« Reply #9 on: April 24, 2011, 10:51:19 AM »
 ;) To me it depends what you want to do with the rifle..for shooting varmits, 55 grain would seem fine..I shot them out of a 22-250 Imp. with a 1-8 twist and they shot super...with the heavier bullets I have questions about the safety of shooting a 69 grain match bullet at varmit, unless you live in pretty wild country...I shot some 100 grain match in my .25-06....they shot super but just penciled through jacks... :-[  I have pretty much gone to 50 or 55 grain bullets for my .22 calibers starting with .222 and going up...if I want a longer bullet with more wt..I step up to the next caliber... ;)
Logged

Offline Star1pup

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 591
Re: Powder for .223
« Reply #10 on: April 24, 2011, 10:56:30 AM »
I will be hunting coyotes here in Ohio where we do not get long shots.  I also have to be careful that I don't get a ricochet into a housing development.  This is not flat land, but I think a lighter bullet that will blow up before it ricochets would be best.  I also like to make a groundhog stew and am not looking to blow them up as some guys seem to do.
Logged

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: Powder for .223
« Reply #11 on: April 24, 2011, 11:16:41 AM »
Star1pup - I was with you until you said - "This is not flat land, but I think a lighter bullet that will blow up before it ricochets would be best.  I also like to make a groundhog stew and am not looking to blow them up as some guys seem to do."

- sounds contradictory - if it will not ricochet, it will blow up a ground hog. If you want a pass through, you will get ricochets.

I am not trying to save any meat, so I go for bullets that blow up when they hit the ground. Along those lines, may I suggest a 55 grain Hornady V-Max for your 1 - 8" twist barrel? they are relatively cheap, have a flat base and shoot surprising well in a lot of different rifles.
Logged
Great men have vision and resolve to make dreams come true.

Offline Old Syko

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2263
  • Gender: Male
Re: Powder for .223
« Reply #12 on: April 24, 2011, 12:52:28 PM »
If you're not wanting to shoot long range and you're wanting to shoot lighter varmint style bullets in the 50 to 55 grain range, you bought the wrong gun.  Got any idea what RPM that little slug is turning when released at full power from a 1-8 barrel compared to a 1-12 twist barrel?  With varmint bullets you certainly won't have any ricochets.   
Logged

Offline Star1pup

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 591
Re: Powder for .223
« Reply #13 on: April 24, 2011, 02:45:39 PM »
I realize that I need to make head shots on groundhogs.  I just meant that some of my friends like to brag about exploding groundhogs.  ;D  I'll probably end up with a 55 to 60 gr. soft point.  I have always liked Hornady so probably stick with them.  One friend loads 50 gr. JHP for his .223.  We have enough hills around here that ricoshets are not really a problem.  My section of Ohio is just across the river from West Virginia.  We don't have mountains, but sure got some steep hills.

I'm thinking 55gr SN over either IMR 4198 or IMR 4895.  I'll go with the Hornady manual and start about midway and work up a bit.  Sound like a plan to you guys?

I can always take my .22 hornet for groundhog stew. ;)
Logged

Offline Zeke R

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
Re: Powder for .223
« Reply #14 on: April 24, 2011, 03:22:05 PM »
I've had best results with H335 in all of my .223's (Handi, No.1 and AR15). Didn't matter if it was surplus or newly manufactured. I also had good results with IMR 4198. Bullet weights were 55 and 60 grains.
Logged

Offline cybin

  • Trade Count: (25)
  • Contributor
  • ***
  • Posts: 399
Re: Powder for .223
« Reply #15 on: April 24, 2011, 05:19:54 PM »
I use both IMR 4198 and IMR 4895 with my .223--I can't tell the difference--both work well. The IMR 4895 I use in other calibers as well.

cybin
Logged

Offline 243dave

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 517
Re: Powder for .223
« Reply #16 on: April 24, 2011, 06:22:53 PM »
Another for Varget.
Logged

Offline Star1pup

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 591
Re: Powder for .223
« Reply #17 on: April 25, 2011, 03:32:36 AM »
Quote from: cybin on April 24, 2011, 05:19:54 PM
I use both IMR 4198 and IMR 4895 with my .223--I can't tell the difference--both work well. The IMR 4895 I use in other calibers as well.

cybin

Since I have both 4198 & 4895 in stock I guess that's a good place to start.
Logged

Offline Wyo. Coyote Hunter

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1839
Re: Powder for .223
« Reply #18 on: April 25, 2011, 03:37:08 AM »
 ;) Those two should to about all you want done with the .223...the only thing with 4198 it doesn't meter well in my measure..but unless a guy is loading 1000 rounds at a time its no big deal...good shooting..
Logged

Offline dks7895

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 292
  • Gender: Male
Re: Powder for .223
« Reply #19 on: April 25, 2011, 03:44:54 AM »
Quote from: Zeke R on April 24, 2011, 03:22:05 PM
I've had best results with H335 in all of my .223's (Handi, No.1 and AR15). Didn't matter if it was surplus or newly manufactured. I also had good results with IMR 4198. Bullet weights were 55 and 60 grains.

+1 on H335
Logged
Winchester 100 .243; Marlin XS7 .308; Stevens 200 .223; Rossi 92 .45LC; Marlin 1894C .357M; Marlin 30AS .30-30; NEF Pardner Pump 12ga; Mossberg 500 Turkey 20ga; Winchester 1200 20ga; Savage Mark II F .22LR; Henry H001 .22LR; Marlin 60SB .22LR; Ruger 10/22 DSP .22LR; Remington Genesis .50 cal ML; Ruger Vaquero .45LC; Ruger Blackhawk .357M; Ruger SR9c 9mm; Ruger Single-Six .22LR; Browning Buck Mark Camper .22LR; Crosman Powermaster 760 .177; Crosman Storm XT .177; Mission X3

Offline HL

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 404
Re: Powder for .223
« Reply #20 on: April 25, 2011, 03:50:01 AM »
In my AR, I've had good luck with H335 and BLC-2, The best I've found, so far, is with AA-2230.
Logged

Offline Star1pup

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 591
Re: Powder for .223
« Reply #21 on: April 25, 2011, 04:04:06 AM »
Quote from: HL on April 25, 2011, 03:50:01 AM
In my AR, I've had good luck with H335 and BLC-2, The best I've found, so far, is with AA-2230.

What is the rifling twist in your AR and how heavy a bullet must you use?
Logged

Offline 223fan

  • Trade Count: (26)
  • Avid Poster
  • **
  • Posts: 247
  • Gender: Male
Re: Powder for .223
« Reply #22 on: April 25, 2011, 03:10:31 PM »
I would bet that a 60gr. vmax and some varget will do a good job for you.
Logged
XLI the one to go with.

Offline McDerry

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 164
Re: Powder for .223
« Reply #23 on: April 25, 2011, 07:29:04 PM »
Accurate 2015 is the powder to get for 223 Remington hands down.   
Logged

Offline mechanic

  • GBO Supporter
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 5112
  • Gender: Male
Re: Powder for .223
« Reply #24 on: April 26, 2011, 02:23:24 AM »
Varget
Logged
Molon Labe, (King Leonidas of the Spartan Army)

Offline billy_56081

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 8575
  • Gender: Male
Re: Powder for .223
« Reply #25 on: April 26, 2011, 02:38:11 AM »
Varget!
Logged
99% of all Lawyers give the other 1% a bad name. What I find hilarious about this is they are such an arrogant bunch, that they all think they are in the 1%.

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Powder for .223
« Reply #26 on: April 26, 2011, 03:12:01 AM »
My old stand by has long been H322 and a BR primer behind a 52/53g match bullet.

Reciently I have had excellent results with 2015BR powder as well.

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline HL

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 404
Re: Powder for .223
« Reply #27 on: April 26, 2011, 08:58:48 AM »
My AR has a 1 in 8 twist. Currently using 64gr Win. Bullets.

I have also tried 55gr, that have proven to be very accurate, normally boring one 3/4" hole. I was suprised to see the cheap dogtown bullets perform that well.
Logged

Offline DANNY-L

  • GBO Supporter
  • Trade Count: (63)
  • Senior Member
  • *****
  • Posts: 1084
  • Gender: Male
Re: Powder for .223
« Reply #28 on: April 26, 2011, 11:10:33 AM »
H335,AA2230 are real good in my mini and rem.model 7 and loading in bulk it helps with a powder that meters good.
Logged

Offline purpledragon

  • Trade Count: (2)
  • Member
  • *
  • Posts: 95
Re: Powder for .223
« Reply #29 on: May 01, 2011, 06:45:53 AM »
AA2230,for me also very good powder for the .223.........
Logged
This only proves that,when allowed to act outside his lawfully limited authority,a U.S. President is capable of unleashing horrendous violence against the lives,liberty,and property of those he pretends to serve...........
Pages: [1] 2   Go Up
« previous next »