« previous next »
Pages: [1]   Go Down

Author Topic: how to shorten a 336 magazine tube?  (Read 1672 times)

0 Members and 1 Guest are viewing this topic.

Offline mattri

  • Trade Count: (16)
  • Contributor
  • ***
  • Posts: 320
how to shorten a 336 magazine tube?
« on: April 24, 2011, 04:38:47 PM »
Looking to shorten the mag tube on my 336 30-30 and eliminate the upper band, like on an xlr.

For those who have done this how much did you take off of the tube and how much off of the spring? 

Thanks, Matt. 
Logged

Offline JPShelton

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 460
Re: how to shorten a 336 magazine tube?
« Reply #1 on: May 18, 2011, 10:54:50 PM »
My mag tube is bobbed to half length, resulting in a "button style" wherein only a very little bit extends beyond the fore-end wood.  It is hung from the barrel in the fashion of the MX/XLR series, with a factory Marlin MX mag tube hanger boss utilized and a corresponding slightly oversized dovetail slot cut into the barrel to accomodate it.  I retained the rear carbine band, which was relieved for barrel clearance and D&T'd on the bottom for a swivel stud.  About a thrid of the mag tube spring was cut off, and a new Hornady FTX friendly plastic follower was utilized.

The result is a solid MOA performer with factory Federal 170's and 1.5 inches with my preffered FTX bullets.  The former tendency to vertically string shots has been eliminated.

T-C
Logged

Offline Hooker

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1581
Re: how to shorten a 336 magazine tube?
« Reply #2 on: May 19, 2011, 03:27:24 PM »
JPShelton
How many rounds does the magazine hold now?

Pat
Logged
" In the beginning of change, the patriot is a brave and scarce man,hated and scorned. when the cause succeeds however,the timid join him...for then it cost nothing to be a patriot. "
-Mark Twain
"What country can preserve its liberties if its rulers are not warned from time to time that their people preserve the spirit of resistance? Let them take arms."
-- Thomas Jefferson to William Stephens Smith, 1787. ME 6:373, Papers 12:356

Offline six_gunz

  • GBO Supporter
  • Trade Count: (5)
  • Contributor
  • *****
  • Posts: 419
  • Gender: Male
Re: how to shorten a 336 magazine tube?
« Reply #3 on: May 29, 2011, 08:12:45 AM »
Quote from: mattri on April 24, 2011, 04:38:47 PM
Looking to shorten the mag tube on my 336 30-30 and eliminate the upper band, like on an xlr.

For those who have done this how much did you take off of the tube and how much off of the spring? 

Thanks, Matt.

Why do you want to do that? Why not just sell yours and buy a 336SC......plenty of good ones out there for sale.
Logged
"I don't hunt for the kill, I kill for the hunt!"

Offline JPShelton

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 460
Re: how to shorten a 336 magazine tube?
« Reply #4 on: August 15, 2011, 01:33:25 AM »
Quote from: Hooker on May 19, 2011, 03:27:24 PM
JPShelton
How many rounds does the magazine hold now?

Pat

The magazine now holds three rounds
 
JP
Logged
Pages: [1]   Go Up
« previous next »