« previous next »
Pages: [1]   Go Down

Author Topic: Ruger new Blackhawk grips  (Read 3183 times)

0 Members and 1 Guest are viewing this topic.

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Ruger new Blackhawk grips
« on: May 04, 2011, 11:27:58 AM »
I got a used Blackhawk. It had rubber grips . I like wood grips so I go online to see if I can get Ruger factory grips . All the wood grips say they won't work with the guns with locks  ??? :o
Sooooo any ideas ? am I stuck with the new plastic grips ? better than rubber but not nice warm wood  :D even the fake ivory wouldn't fit  :(
Logged
If ya can see it ya can hit it !

Offline nicholst55

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 127
  • Gender: Male
Re: Ruger new Blackhawk grips
« Reply #1 on: May 04, 2011, 02:37:53 PM »
Most aftermarket grip makers make their grips to fit the guns with locks.  Or, you can get rid of the lock...
Logged


"I don't think we're in Kansas any more, Toto!"  Dorothy, in 'The Wizard of Oz.'

Offline BlkHawk73

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1501
  • Gender: Male
Re: Ruger new Blackhawk grips
« Reply #2 on: May 04, 2011, 03:13:11 PM »
Quote from: nicholst55 on May 04, 2011, 02:37:53 PM
Most aftermarket grip makers make their grips to fit the guns with locks.  Or, you can get rid of the lock...


  Well, getting rid of the lock means basically changing the whole grip frame out.  That or fabricating a new assembly to work with the hammer strut assembly.  As for grips... check with the better gunmakers.  They'll be able to accomodate you.
Logged
"Never Surrender, Just Carry On."  - G.S.

Offline BlkHawk73

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1501
  • Gender: Male
Re: Ruger new Blackhawk grips
« Reply #3 on: May 04, 2011, 03:16:46 PM »
  What material you looking for? 
Logged
"Never Surrender, Just Carry On."  - G.S.

Offline flintlock

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1405
  • Gender: Male
Re: Ruger new Blackhawk grips
« Reply #4 on: May 04, 2011, 04:06:00 PM »
Sure you can get wood grips for the Blackhawks with locks...

I bought a Ruger 50th Anniversary in .44 Mag a while back and hated those rubber grips...
I found this guy online and ordered a set of birdseye maple and love them...

http://www.privatescustomgrips.com/
Logged

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: Ruger new Blackhawk grips
« Reply #5 on: May 05, 2011, 02:34:48 AM »
Quote from: BlkHawk73 on May 04, 2011, 03:16:46 PM
  What material you looking for?

I wanted factory wood grips .
Logged
If ya can see it ya can hit it !

Offline LONGTOM

  • Trade Count: (391)
  • Senior Member
  • *****
  • Posts: 4644
  • Gender: Male
  • IF ONLY I COULD GO BACK-I WOULD BE A MOUNTAIN MAN!
Re: Ruger new Blackhawk grips
« Reply #6 on: May 05, 2011, 02:36:03 AM »
EBAY has grips listed for them all the time.
They may not be factory grips but many grip makers will put the medallions in them for a small extra charge.



LONGTOM
Logged
NRA Benefactor Life Member
NAHC Life Member
NRA Member-JAMES MADISON BRIGADE
IWLA Member
NRA/ILA Member
CCRKBA Member
US OLIMPIC SHOOTING TEAM supporter

"THE TREE OF LIBERTY FROM TIME TO TIME MUST BE REFRESHED WITH THE BLOOD OF PATRIOTS AND TYRANTS".
THOMAS JEFFERSON

That my two young sons may never have to know the horrors of war. 

I will stand for your rights as my forefathers did before me!
My thanks to those who have, are and will stand for mine!
To those in the military, I salute you!

LONGTOM 9-25-07

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: Ruger new Blackhawk grips
« Reply #7 on: May 05, 2011, 02:40:21 AM »
Thanks
Logged
If ya can see it ya can hit it !

Offline nicholst55

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 127
  • Gender: Male
Re: Ruger new Blackhawk grips
« Reply #8 on: May 05, 2011, 03:41:10 PM »
Quote from: BlkHawk73 on May 04, 2011, 03:13:11 PM
Quote from: nicholst55 on May 04, 2011, 02:37:53 PM
Most aftermarket grip makers make their grips to fit the guns with locks.  Or, you can get rid of the lock...


  Well, getting rid of the lock means basically changing the whole grip frame out.  That or fabricating a new assembly to work with the hammer strut assembly.

It isn't all that difficult to replace the existing hammer strut and seat, and to simply remove the lock.  Ask Carl (Flatgate).
Logged


"I don't think we're in Kansas any more, Toto!"  Dorothy, in 'The Wizard of Oz.'

Offline flatgate

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 158
Re: Ruger new Blackhawk grips
« Reply #9 on: May 07, 2011, 05:37:41 AM »
One can fit Factory Wood Grips by "carving" out some room for the lock.  Not a difficult thing to do.

Yes, one can indeed devise an "adaptor" that replaces the lock and sets a bit lower in the grip frame so a "standard"
Ruger Single Action mainspring, mainspring strut and mainspring seat can be fitted.

I make mine out of brass, copper or aluminum.

flatgate
Logged

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: Ruger new Blackhawk grips
« Reply #10 on: May 09, 2011, 03:07:09 AM »
If possible a picture is worth a 1000 words .
Logged
If ya can see it ya can hit it !

Offline flatgate

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 158
Re: Ruger new Blackhawk grips
« Reply #11 on: May 14, 2011, 03:40:25 AM »
Quote from: SHOOTALL on May 09, 2011, 03:07:09 AM
If possible a picture is worth a 1000 words .

No can do.  I do not think my Friends at SR&Co. would appreciate my efforts therefore I've decided to not share my simple design.

Hint...... set the two styles (Lock & No Lock) grip frames side by side.....

Carl
Logged

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Ruger new Blackhawk grips
« Reply #12 on: May 14, 2011, 02:59:18 PM »
Quote from: flintlock on May 04, 2011, 04:06:00 PM
Sure you can get wood grips for the Blackhawks with locks...

I bought a Ruger 50th Anniversary in .44 Mag a while back and hated those rubber grips...
I found this guy online and ordered a set of birdseye maple and love them...

http://www.privatescustomgrips.com/

Yah, private is good to work with.  He got me set up with grey/black laminate set pricing and was quite reasonable.  I had a couple emails, but it was last year.  Pricing was good and he will actually use any materials available in Sheffield's Supply Company: http://www.sheffieldsupply.com/catalog/SupplyCat.pdf.  8)
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline The Happy Kaboomer

  • Trade Count: (0)
  • Member
  • *
  • Posts: 29
Re: Ruger new Blackhawk grips
« Reply #13 on: May 14, 2011, 03:51:00 PM »
Quote from: flintlock on May 04, 2011, 04:06:00 PM
Sure you can get wood grips for the Blackhawks with locks...

I bought a Ruger 50th Anniversary in .44 Mag a while back and hated those rubber grips...
I found this guy online and ordered a set of birdseye maple and love them...

http://www.privatescustomgrips.com/

+1 on Private's grips. I have a set of American Holley on my .44 spl. flattop and they look and work great.

AND FOR PETES SAKE..........Quit calling those $0.25 plastic cheap grips hard rubber........they are not!
Logged
May The Lord's Continued Blessing's Be Upon Us All..........Life's Good............THK

Offline jimster

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2237
  • Gender: Male
Re: Ruger new Blackhawk grips
« Reply #14 on: May 15, 2011, 10:03:50 AM »
I bought a set of grips from Cary to replace the plastic ones on my Ruger 44 spl. with the lock in the grip.

http://www.clccustomgrips.com/



Logged

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: Ruger new Blackhawk grips
« Reply #15 on: May 25, 2011, 05:16:45 AM »
thanks !
Logged
If ya can see it ya can hit it !

Offline crash87

  • Trade Count: (5)
  • Contributor
  • ***
  • Posts: 408
Re: Ruger new Blackhawk grips
« Reply #16 on: May 25, 2011, 02:29:59 PM »
Quote from: flintlock on May 04, 2011, 04:06:00 PM
Sure you can get wood grips for the Blackhawks with locks...

I bought a Ruger 50th Anniversary in .44 Mag a while back and hated those rubber grips...
I found this guy online and ordered a set of birdseye maple and love them...

http://www.privatescustomgrips.com/

If you get them from privates you, like me, will not be disappointed, have a set of ebony on my Flatop .44 spec.
Logged

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Ruger new Blackhawk grips
« Reply #17 on: May 30, 2011, 02:29:26 PM »
+1 on private, too ; great comm and workmanship; I didn't think I could get real custom grips so reasonable.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline greenrivers

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 341
Re: Ruger new Blackhawk grips
« Reply #18 on: June 09, 2011, 03:56:31 AM »
Yes, the plastic grips are cheap and only come close in looks to the original hard rubber that Colt used, but the feel of them is not bad at all. The checkering helps keep the gun from slipping in the hand and is not a problem with recoil. I hope to complete the sanding and apply finish to a set of very heavily curly maple today, and I know that the wood will look better, but I am not sure that they will feel better. As for the lock assembly, a very shallow cut in the back of the grips accounts easily for it.
Logged
Pages: [1]   Go Up
« previous next »