« previous next »
Pages: [1]   Go Down

Author Topic: HELP! Seating SSP Hornady pointy bullets in the 357 Maxi?  (Read 1490 times)

0 Members and 2 Guests are viewing this topic.

Offline Couger

  • Trade Count: (77)
  • Senior Member
  • *****
  • Posts: 1652
HELP! Seating SSP Hornady pointy bullets in the 357 Maxi?
« on: May 18, 2011, 08:32:00 AM »
Hello.

Looking to reload some .357 Max loads with RCBS carbide dies and the Hornady SSP 180grn bullets that seem to be made for the Maximum.

What do you reloaders use when you use that same bullet to make your own reloads?

If you're using RCBS dies, the seater plug in the .38 / .357 Mag / .357 Maxi combo's do not come with an approriate seater plug for seating .35 caliber spitzers ......

What solution have you found?  So when loading that single-shot .35 cal Hornady pistol bullet you do not crush or deform that pointed projectile?

I can find a seating plug for the Speer 180 grain .357 Silhouette bullet, but no seating plugs that would even serve in a .358 Winchester or .35 whelen  RCBS seating die.

Would "winging it" with a .308 caliber seating plug be worth a try?  (largest diameter or caliber seating plug I have found for a spitzer bullet!).

Thanks for any input or suggestions.
Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: HELP! Seating SSP Hornady pointy bullets in the 357 Maxi?
« Reply #1 on: May 18, 2011, 09:13:02 AM »
Lee will make you the appropriate seater of the SSPs for their 38/357 seat die.  I think Pete got one from them last year.   Maybe RCBS will do the same?

BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline yukondog

  • GBO Supporter
  • Trade Count: (43)
  • Senior Member
  • *****
  • Posts: 1095
Re: HELP! Seating SSP Hornady pointy bullets in the 357 Maxi?
« Reply #2 on: May 18, 2011, 09:21:21 AM »
I use Lee dies and load and crimp in two sepparet operations and it does not deform the tips, you might try drilling the center of the seater plug out some for the tip of the bullet to rest in,I'v done this for other seater plugs and works pretty good.
Logged
an unloaded wepon is equal to the same mass and volume as a rock.

Offline dave29

  • GBO Supporter
  • Trade Count: (93)
  • Senior Member
  • *****
  • Posts: 1256
Re: HELP! Seating SSP Hornady pointy bullets in the 357 Maxi?
« Reply #3 on: May 18, 2011, 10:33:29 AM »
I have heard of people drilling them out.

I bought Hornady dies so I could avoid this problem.
Logged

Offline Couger

  • Trade Count: (77)
  • Senior Member
  • *****
  • Posts: 1652
Re: HELP! Seating SSP Hornady pointy bullets in the 357 Maxi?
« Reply #4 on: May 18, 2011, 10:44:43 AM »
Thanks everyone!

I like your suggestion Dave, best of all.



I already have .30/06 RCBS dies with an appropriate seater plug that will also fit my RCBS .357 dies (turns out), so I will try that substitution!  Might take a week or 10 days but will try to post again with a report when its done.

The RCBS .357 combo-carbide die set comes with three seater plugs; round nose, wad cutter, and a truncated design obviously for the Speer silhouette profile I mentioned about.  Even getting a seater plug for any of the Speer Gold Dot bullets of various weights are additional purchases.  ::)

I expect the .30 caliber seater to (barely perhaps) to work.   ;)
Logged

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: HELP! Seating SSP Hornady pointy bullets in the 357 Maxi?
« Reply #5 on: May 18, 2011, 01:31:25 PM »
Years ago I drilled mine to fit the SSP and its been working for me ever since!!

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: HELP! Seating SSP Hornady pointy bullets in the 357 Maxi?
« Reply #6 on: May 18, 2011, 03:33:14 PM »
I have the same set as you. I sacrificed one of the seating stems and gouged out a larger space in the end with my Dremel. After that, I filled it with JB Weld. After coating the 180gr SSPB with release agent, I placed it in the end. I let it harden overnight and then removed the bullet and cleaned-up the overflow. Now I have a seater plug that is made specifically for that bullet.

I used that for quite a while until....I bought a set of older RCBS dies that were made specifically for the Maxi. I replaced the seater plug with one from the .35 Rem/.35 Whelen as it's made for pointy bullets.

Since I don't use the modified seater plug anymore, you can have it. Send me a PM with your address and I will try to get it mailed this week.


Thanks, Dinny


Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline Couger

  • Trade Count: (77)
  • Senior Member
  • *****
  • Posts: 1652
Re: HELP! Seating SSP Hornady pointy bullets in the 357 Maxi?
« Reply #7 on: May 18, 2011, 03:48:24 PM »
Thanks for the offer Dinny, but keep it for the next guy!

I got curious enough to snag the seater plug from my .30/06 RCBS dies and that seater plug will work fine!  Its @ 1/4 inch shorter than the pistol seater plugs, otherwise the threaded stem is the same overall design and 1/4-28 fine thread pattern.

The .35 cal Hornady SSP bullet fits in it like they were meant to be.  Thanks again for the offer.   :)
Logged

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: HELP! Seating SSP Hornady pointy bullets in the 357 Maxi?
« Reply #8 on: May 18, 2011, 03:51:49 PM »
I'm glad you found something that will work. We can't have a Maxi shooter going without ammo...


Thanks, Dinny


Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline goofyoldfart

  • grumpy old fart as well as goofy old fart.
  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 333
  • Gender: Male
Re: HELP! Seating SSP Hornady pointy bullets in the 357 Maxi?
« Reply #9 on: May 18, 2011, 05:03:42 PM »
Hey , Dinny.  I really like the new Avatar. been off the air for a while , while AT&T and I argue over a bill. still off , but my friend said that I could use his now and then. God bless to all.


                             GOF aka goofyoldfart
Logged

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: HELP! Seating SSP Hornady pointy bullets in the 357 Maxi?
« Reply #10 on: May 18, 2011, 05:27:33 PM »
Quote from: goofyoldfart on May 18, 2011, 05:03:42 PM
Hey , Dinny.  I really like the new Avatar. been off the air for a while , while AT&T and I argue over a bill. still off , but my friend said that I could use his now and then. God bless to all.


                             GOF aka goofyoldfart

Thanks!!
Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine
Pages: [1]   Go Up
« previous next »