Author Topic: Accurate 5744  (Read 678 times)

0 Members and 2 Guests are viewing this topic.

Offline GH1

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 939
  • Gender: Male
Accurate 5744
« on: June 07, 2011, 02:47:06 PM »
Anyone use this?  I'm thinking about getting some for the .45-70 I haven't bought yet.  ;)
GH1 :)
I owe my life to an organ donor

Offline AtlLaw

  • Moderators
  • Trade Count: (58)
  • Senior Member
  • *****
  • Posts: 6405
  • Gender: Male
  • A good woman, nice bike and fine guns!
Re: Accurate 5744
« Reply #1 on: June 07, 2011, 02:53:37 PM »
I got some to use in my 45-120.  What little experience I had with it consisted of modest but accurate loads; 405 gr. jacketed @ 2000 fps.  I like it well enough to try it in other cartridges when I get the chance.  Especially for reduced loads.
Richard
Former Captain of Horse, keeper of the peace and interpreter of statute.  Currently a Gentleman of leisure.
Nemo me impune lacessit

                      
Support your local US Military Vets Motorcycle Club

Offline chefjeff

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 472
Re: Accurate 5744
« Reply #2 on: June 07, 2011, 04:01:38 PM »
I shoot it out of a savage ML. 250 gr. XTP,MMP sabot. Lots of dead deer behind this load.

Offline shot1

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1064
Re: Accurate 5744
« Reply #3 on: June 07, 2011, 04:54:49 PM »
It is really made to use with cast bullets. I used it some in my 45-70 with a Lyman 405 cast and 28 grs and it does around 1400 fps. A 100 yards will shoot ragged hole groups out of my sharps off the bench. I did not find a deer that could stop one of the bullets. Complete pass through even from chest out the backside. That is about the same velocity that 70 grs FFG will give you with that bullet.

Offline Ranch13

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1062
  • Gender: Male
    • Historic Shooting .com
Re: Accurate 5744
« Reply #4 on: June 07, 2011, 06:56:53 PM »
It's a great cast bullet powder. It's quite useful at duplicating blackpowder velocities, and provides accuracy almost on par with blackpowder, but not quite as good as the real thing.
In the 1920's "sheeple" was a term coined by the National Socialist Party in Germany to describe people that would not vote for Hitler. In the 1930's they held Hitler as the only one that would bring pride back to Germany and bring the budget and economy back.....

Offline Bob J

  • Trade Count: (0)
  • Member
  • *
  • Posts: 63
  • Gender: Male
Re: Accurate 5744
« Reply #5 on: June 08, 2011, 01:50:22 AM »
This is now my "go to" powder for all my rifle loads....  Very consistent over both reduced and full loads.....

Offline shot1

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1064
Re: Accurate 5744
« Reply #6 on: June 08, 2011, 02:56:58 AM »
One thing note worthy is, it burns a little dirty. There will be what looks like unburnt grains left in the barrel but they have burnt and this residue does not effect accuracy. This powder is not position sensitive either. It does not matter if the powder is up at the bullet or back at the primer it lights the same. 

Offline GH1

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 939
  • Gender: Male
Re: Accurate 5744
« Reply #7 on: June 08, 2011, 05:49:30 AM »
That's good news guys. The was powder recommended to my by the staff ballistician at Accurate when I sent him an e-mail with the parameters I want. I told him I was looking to fire a 405 cast at around 1100-1200 FPS, so he recommended that powder & some loads.
24.3 gr are supposed to give me 1225-1325 FPS, and 27 gr are supposed to give me 1300-1375. This numbers are based on a 24" barrel.
However, I realize the the staff ballistician might be just a little bit biased regarding the effectiveness of his product, so I thought I'd get some feedback from some folks that have actually used. And as usual, GBO has provided me with the info I need.
Thanks a bunch everybody.
GH1 :)
I owe my life to an organ donor

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Accurate 5744
« Reply #8 on: June 08, 2011, 05:57:47 AM »
It's a great cast bullet powder. It's quite useful at duplicating blackpowder velocities, and provides accuracy almost on par with blackpowder, but not quite as good as the real thing.

I completely agree!!!!  Ihave burned up a half a doz pounds in my handis!! It's a nice bulky powder well suited to large cases like the 500, 444 and of coarse the 45/70.

Give it a try, I think you will like it!!

CW
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline GH1

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 939
  • Gender: Male
Re: Accurate 5744
« Reply #9 on: June 08, 2011, 08:25:59 AM »
How does it meter out of a powder dispenser? I've used Trail Boss out of my RCBS and it didn't meter consistantly at all.
GH1 :)
I owe my life to an organ donor

Offline Bob J

  • Trade Count: (0)
  • Member
  • *
  • Posts: 63
  • Gender: Male
Re: Accurate 5744
« Reply #10 on: June 08, 2011, 08:38:36 AM »
How does it meter out of a powder dispenser? I've used Trail Boss out of my RCBS and it didn't meter consistantly at all.
GH1 :)

I load mine in a dillon and it meters great.... ;)

Offline Ranch13

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1062
  • Gender: Male
    • Historic Shooting .com
Re: Accurate 5744
« Reply #11 on: June 08, 2011, 08:45:16 AM »
I have more trouble with it getting hung up in the funnel than the measure, especially on smaller cases like the 30-30.
In the 1920's "sheeple" was a term coined by the National Socialist Party in Germany to describe people that would not vote for Hitler. In the 1930's they held Hitler as the only one that would bring pride back to Germany and bring the budget and economy back.....

Offline calvon

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 274
  • Gender: Male
Re: Accurate 5744
« Reply #12 on: June 08, 2011, 01:05:03 PM »
It works well behind 260 grain gas checked cast bullets in a 35 Whelen. It's a bit dirty and sometimes wants to clog up in the drop tube of the powder measure. I tap the measure on every round to make sure all the powder gets dumped and carefully check every round to make sure it didn't happen.