Author Topic: Need measurements from a 32 ga. all brass shotshell  (Read 535 times)

0 Members and 1 Guest are viewing this topic.

Offline jedman

  • GBO Supporter
  • Trade Count: (24)
  • A Real Regular
  • *****
  • Posts: 921
  • Gender: Male
  • Retired and livin the dream !
Need measurements from a 32 ga. all brass shotshell
« on: June 12, 2011, 02:39:45 AM »
  I am looking to form some brass cases similar to a 50-70 using all brass shotshells such as Mag Tech 32 ga.
  If anyone has one of these cases available to measure I would like to know these measurements,

Diameter at the base, just above the rim

 Approximate OD, & ID at the case mouth

Diameter of the rim,                                                        Thanks in advance,       Jedman
Current handi family, 24 ga./ 58 cal ,50-70,  45 smokeless MZ, 44 belted bodeen, 44 mag,.375 H&R (wildcat),375 Win.,357 max, .340 MF ( wildcat ), 8 mm Lebel, 8x57, .303 British, 270 x 57 R,(wildcat) 256 Win Mag, 2 x 243 Win,2 x 223 Rem. 7-30 Waters &20ga.,

Offline Old Syko

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2263
  • Gender: Male

Offline jedman

  • GBO Supporter
  • Trade Count: (24)
  • A Real Regular
  • *****
  • Posts: 921
  • Gender: Male
  • Retired and livin the dream !
Re: Need measurements from a 32 ga. all brass shotshell
« Reply #2 on: June 16, 2011, 02:52:52 AM »
  I have found a better case to form than the 32 ga. all brass shotshell case.
Its the 8 X 50 R Lebel case, It has a big rim and a solid head at the base around the primer and are available for under .50 ea. from Graf & sons.
 Thanks for the help.          Jed
Current handi family, 24 ga./ 58 cal ,50-70,  45 smokeless MZ, 44 belted bodeen, 44 mag,.375 H&R (wildcat),375 Win.,357 max, .340 MF ( wildcat ), 8 mm Lebel, 8x57, .303 British, 270 x 57 R,(wildcat) 256 Win Mag, 2 x 243 Win,2 x 223 Rem. 7-30 Waters &20ga.,