« previous next »
Pages: [1]   Go Down

Author Topic: ? for you Ruger S-Six guys  (Read 813 times)

0 Members and 1 Guest are viewing this topic.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
? for you Ruger S-Six guys
« on: July 14, 2011, 02:29:54 PM »
Did the Sgl Six ever come with a, undercut, flat-topped target style front sight blade as original or factory option?
If not who may have made such as a replacement?
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26946
  • Gender: Male
Re: ? for you Ruger S-Six guys
« Reply #1 on: July 14, 2011, 06:41:07 PM »
Don't claim any expert status on Rugers but it sounds to me like someone took the front sight off a semiauto Ruger and stuck it on the Single Six. I've never seen the sight you mention on the revolver but have on the semiautos.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: ? for you Ruger S-Six guys
« Reply #2 on: July 15, 2011, 04:16:50 AM »
Ah! That makes sense......the typical ramp gives me trouble and the sight attracted me. I'll know more tonight as I will likely have the piece.
I had never seen such either, but I have not been paying more than casual attention to Rugers.
Looks like it should work great (except for pulling out of a holster).
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: ? for you Ruger S-Six guys
« Reply #3 on: July 15, 2011, 03:42:50 PM »
It be mine!
Turns out to be a 3 screw, 5 1/2", round gate with what does look like a 1 screw mount Ruger Mk? front; a nice target sight picture for me.
Sad part is that it must have sat in a damp basement or such and has some surface rust, but no real bad deep pits. That is what made it affordable for me, though and I can pretty it up.
All in all, Im a pretty happy guy today  ;D .
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26946
  • Gender: Male
Re: ? for you Ruger S-Six guys
« Reply #4 on: July 15, 2011, 06:33:07 PM »
Ruger will refinish it pretty economically to factory new condition. Since they believe in returning things to as issued condition they might not return that front sight so ya might want to remove it if you send it in assuming you want to keep it.

I had a patridge front put on my Single Six.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline Brett

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 5148
  • Gender: Male
Re: ? for you Ruger S-Six guys
« Reply #5 on: July 15, 2011, 06:44:31 PM »
Quote from: Graybeard on July 15, 2011, 06:33:07 PM
Ruger will refinish it pretty economically to factory new condition. Since they believe in returning things to as issued condition they might not return that front sight so ya might want to remove it if you send it in assuming you want to keep it.

I had a patridge front put on my Single Six.

Also be aware that Ruger will retrofit your 3 screw with the hammer block safety if it has not already been done.   Some people feel that this retrofit compromises the SS's trigger and detracts from a collector pieces value.

P.S.: If your gun has not been retrofitted with the hammer block safety be sure to only load 5 rounds and rest the hammer on the empty chamber.
Logged
Life memberships:  <><, NRA, BASS, NAFC

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: ? for you Ruger S-Six guys
« Reply #6 on: July 16, 2011, 09:36:48 AM »
Yes guys, Im aware of these points, but the shipping is prohibitive and negates their reasonable refinish cost and I just cant bring myself to send something away!, and I rather like the pre-TB action.
A little more online research and a call from a friend indicates that the Super Sgl. Six (having the adj. rear sight, as this does) had an undercut front ramp/blade option! I Googled 'Ruger Super Single Six' and found a site with pics, some of these so equiped included. Im even more happy now  ;D ;D .
A good soak of surface of the steel with Kroil last night and an hour of careful brass scraper on the surface rust today has resulted in a quite good looking finish. I am SOOO glad the fellow did not go after this with a wire wheel or even steel wool, like so many guys do. A rub down with Ballistol now, and just use and properly care for it and it will be fine. It really seems to have had little use and the Ruger medallions are the 'flat, black eagle' type' and XR3-RED frame so this seems to be a post '64 (SSS, adj. sight) /pre TB '72. Hope the fellow can come up with the .22M cylinder (he has my number), but I dont 'need' it and it may have never come with one.
A classy 'old' gun with a good home, what could be better!
P.S.: Im still open to questions, comments or corrections on any of this 'info' from you Ruger gents with more experience, Im newish to these.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Online Lloyd Smale

  • Moderator
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18276
Re: ? for you Ruger S-Six guys
« Reply #7 on: July 17, 2011, 02:55:15 AM »
i had a ruger bisley that came from the factory a 6.5 inch two toned single six ( stainless grip frame, the rest blued). It had an undercut partridge front sight blade.
Logged
blue lives matter

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: ? for you Ruger S-Six guys
« Reply #8 on: July 17, 2011, 04:17:12 AM »
That sounds like a special Bisley for sure, Lloyd!, though a lot newer than my humble revolver.
I note you say 'had'........for all the looks and promise, did it not live up to your expectations?
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Brett

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 5148
  • Gender: Male
Re: ? for you Ruger S-Six guys
« Reply #9 on: July 17, 2011, 11:10:12 AM »
gcrank1,  We want to see pictures.  ;D   
Logged
Life memberships:  <><, NRA, BASS, NAFC

Offline 44 Man

  • Trade Count: (28)
  • Senior Member
  • *****
  • Posts: 2419
  • Gender: Male
Re: ? for you Ruger S-Six guys
« Reply #10 on: July 17, 2011, 01:00:05 PM »
Yes, pictures please!  And if you took some of it 'before', we'd enjoy seeing them also.  A fine gun in a fine home, what could be better!  44 Man
Logged
You are never too old to have a happy childhood!

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: ? for you Ruger S-Six guys
« Reply #11 on: July 17, 2011, 02:49:47 PM »
I ran out of flash powder for the pinhole box  and Im out of glass plate, so Im 'afraid' the work got done without a pic.
Let me see what my wife (the home technut) can do......
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Brett

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 5148
  • Gender: Male
Re: ? for you Ruger S-Six guys
« Reply #12 on: July 17, 2011, 05:20:44 PM »
Quote from: gcrank1 on July 17, 2011, 02:49:47 PM
I ran out of flash powder for the pinhole box  and Im out of glass plate, so Im 'afraid' the work got done without a pic.

When are you going to bite the bullet and upgrade to a Brownie like I did?
Logged
Life memberships:  <><, NRA, BASS, NAFC
Pages: [1]   Go Up
« previous next »