Author Topic: Encore/Contender Pictures!! (Read 11346 times)

Camp Cook · « **Reply #60 on:** March 22, 2012, 04:37:51 PM »

No wonder they look good to me = I have painted synthetic stocks with the same kind of paint...

schuetzen · « **Reply #61 on:** March 23, 2012, 09:33:33 AM »

Quote from: jwtate on March 21, 2012, 03:43:53 PM

Here is a pic of my Encore.

http://www.gboreloaded.com/forums/index.php?action=dlattach;topic=237742.0;attach=72245;image

@jwtate What barrels that? Heavy or Bull? Caliber?

tuco · « **Reply #62 on:** March 23, 2012, 03:46:28 PM »

schuetzen, what type of shell holder is that?

schuetzen · « **Reply #63 on:** March 23, 2012, 04:06:49 PM »

Quote from: tuco on March 23, 2012, 03:46:28 PM

schuetzen, what type of shell holder is that?

The photo is jwtate's (see his earlier post on this thread). When I tried to "quote" his post, the reply didn't include the photo, so I copied and pasted the address of it again. I am curious about the shell holder also.

Camp Cook · « **Reply #64 on:** March 23, 2012, 04:22:31 PM »

That is the second shell holder I have seen like that first one I saw was leather they don't really appeal to me I like have a butt stock shell holder.

jwtate · « **Reply #65 on:** March 25, 2012, 06:19:27 AM »

It was a 26" .308 Win. heavy barrel that I had cut to 20". I also had it ceracoated in graphite black. My gunsmith and I argued for two weeks over the length. He wanted to cut it to 22" and I wanted to cut it to 18", so we agreed to meet in the middle and make it 20".

The shell holder is from TC. It was on their website. I have had it for several years now, so I am not sure if they still have it or not. I ordered the medium holder and they sent me the small one. It is for .223 sized cases. The .308 cases stick out more than the are supposed to and are also a little hard to get in and out. I should have sent it back and got the correct one but I didn't have the patience to to wait, so I just made it work.

schuetzen · « **Reply #66 on:** March 25, 2012, 11:41:14 AM »

Quote from: jwtate on March 25, 2012, 06:19:27 AM

It was a 26" .308 Win. heavy barrel that I had cut to 20". I also had it ceracoated in graphite black. My gunsmith and I argued for two weeks over the length. He wanted to cut it to 22" and I wanted to cut it to 18", so we agreed to meet in the middle and make it 20".

The shell holder is from TC. It was on their website. I have had it for several years now, so I am not sure if they still have it or not. I ordered the medium holder and they sent me the small one. It is for .223 sized cases. The .308 cases stick out more than the are supposed to and are also a little hard to get in and out. I should have sent it back and got the correct one but I didn't have the patience to to wait, so I just made it work.

Nice. Heck, I use to shoot a Encore handgun with a 15" .308 barrel. There is nothing wrong with a 18" or even a 16" with a little sacrifice of the performance. I stopped because it hurt too much! I had a pain that would shoot up my arm when shooting more than a half a dozen shots.

sam77757 · « **Reply #67 on:** April 12, 2012, 07:54:51 AM »

Just wanted to add a couple pictures to the Party

.223 Bergara SS Full Bull 26" Nikon Buckmaster 4.5-14x40 SF

300 win mag SS heavy 26" Leupold Vari-xIII 4.5-14x40 W/Varmint Recticles

.223 again

300 Win Mag 100yds

cherokee5425 · « **Reply #68 on:** May 26, 2012, 07:59:58 AM »

Heres a pic of 3 of mine. A S/S 30-30, Blue/wood .44 mag and my camo .17 Rem

Camp Cook · « **Reply #69 on:** May 26, 2012, 08:04:07 AM »

I bought a 21" T/C factory 17 Rem tapered carbine barrel last year but haven't had the time to properly work up a load for it yet.

If your reloading care to share your data?

CC

Joe S. · « **Reply #70 on:** June 04, 2012, 06:05:18 PM »

Here is one i got in a trade yesterday...

16.5" SS 308 barrel on blued frame with Leupold M8 6x
Pistol forend.

Looking for some wood to replace it. Not a synthetic fan. I swear if i had an AR id want some wood on it.

Also would like a 358 win barrel for it. Here in MS we can primitive weapon hunt with this type rifle in 35 cal or larger.

I fired 20 rounds thru it today. It shoots fair with the cheap ammo i used so i think with the right load it may drive tacks.

••Update to this post.••

Found a local guy selling a Boyds lam thumbhole stock and bought it today.

Ordered my 358 win barrel off 24hourcampfire and hopin it will be in soon.

Also ordered 150 pcs of brass, dies and bullets. Cant wait to get my lil thumper put together!!

Joe S. · « **Reply #71 on:** June 09, 2012, 09:53:45 AM »

Another shot. The contender belongs to a friend. Its a 30-30

Curtis · « **Reply #72 on:** June 09, 2012, 11:19:49 AM »

Nice. .......and the Contender, I've always been intrigued by those "push-pull" type pistol grips. I have never seen any come up on the used market though, so I may need to make one some day.

Curtis

Joe S. · « **Reply #73 on:** June 21, 2012, 04:34:07 PM »

Had it out today testing out the 16" .358 win barrel.

dave29 · « **Reply #74 on:** June 22, 2012, 01:06:05 AM »

That's a fine looking "shorty"!

Joe S. · « **Reply #75 on:** June 22, 2012, 04:43:21 AM »

Thanks

jake · « **Reply #76 on:** June 30, 2012, 02:45:56 AM »

Here are my two. 209x50 and 280 rem

Joe S. · « **Reply #77 on:** June 30, 2012, 03:13:30 AM »

I really like the 280 round! Seems like a whitetail burner

gremcat · « **Reply #78 on:** June 30, 2012, 12:38:43 PM »

What stock set is that on the 280? It looks like a B and C but on an encore.

dstegjas · « **Reply #79 on:** June 30, 2012, 02:52:09 PM »

Two of my Contenders that are the most accurate. The first one is a Bullberry and the second one is an MGM.

Jim

jake · « **Reply #80 on:** June 30, 2012, 03:16:21 PM »

Gremcat, The stock on the 280 is a standard black synthetic TC stock and forearm.I painted them both with Krylon Khaki and black webbing paint.Then put 2 coats of satin clear coat on it.

Spokerider · « **Reply #81 on:** July 02, 2012, 12:56:27 PM »

Here is a 44 mag encore with a "take down" knob I made.
This little carbine can be carried in a backpack an assembled in less than 5 seconds, and loaded in another 2 or 3 seconds. The takedown knob stays on the stock via the locking nut, and so it won't be *lost* in the bottom of the backpack when you most need it.
The plastic stock has been filed down to be perpendicular to the stock bolt. The takedown knob has been made to mate with both the filed part of the stock and the surface up inside the grip the the original bolt mated with. It is rock solid!

.......and before you ask........yes.....here in Canada this carbine is legal

.

schuetzen · « **Reply #82 on:** July 02, 2012, 01:10:56 PM »

Quote from: Spokerider on July 02, 2012, 12:56:27 PM

Here is a 44 mag encore with a "take down" knob I made.
This little carbine can be carried in a backpack an assembled in less than 5 seconds, and loaded in another 2 or 3 seconds. The takedown knob stays on the stock via the locking nut, and so it won't be *lost* in the bottom of the backpack when you most need it.
The plastic stock has been filed down to be perpendicular to the stock bolt. The takedown knob has been made to mate with both the filed part of the stock and the surface up inside the grip the the original bolt mated with. It is rock solid!

.......and before you ask........yes.....here in Canada this carbine is legal .

Interesting idea. Thanks for sharing.

It's a shame we can't easily do this in the US. There are soooooo many 15" barrels available. But finding them in ~16" is so difficult. I have wondered why TC didn't just make barrels in 16" as the standard instead of 15". Are there states in the US where pistols can't have a 16" barrel? There should be some exclusion of these silly regulations for single shot arms.

The other alternative in the US is to SBR an Encore frame. Then barrels become plentiful.

butchen · « **Reply #83 on:** July 03, 2012, 03:32:11 AM »

Spokerider VERY MUCH COOL!!!!!!!!!

VT30-30 · « **Reply #84 on:** July 04, 2012, 07:25:54 AM »

Thought I'd put up a picture of my Encores. Top to bottom.
1. 12 ga. 2. 22-250 Rem.
3. 45-70 Govt. 4. 7mm-08 Rem.
5. 280 Rem.

Rifle # 1. 223 Rem.
2. 6.5x55mm
3. 30-30 Win.
Missing are a 209x50 Endeavor rifle and a 209x50 Katardin barrel.
I do like T/C Encores.

Spokerider Very cool carbine.

dave22250 · « **Reply #85 on:** July 10, 2012, 11:03:44 AM »

Heres my ground hog gun a 223 encore

GarrettJ · « **Reply #86 on:** July 15, 2012, 12:32:26 PM »

Curtis · « **Reply #87 on:** July 15, 2012, 01:14:33 PM »

Nice!!! Details please?

Curtis

GarrettJ · « **Reply #88 on:** July 15, 2012, 01:22:11 PM »

Quote from: Curtis on July 15, 2012, 01:14:33 PM

Nice!!! Details please?

The SBR has a 10" SSK .300 Whisper and an SWR Trident-9. I bought the unfinished, inletted stock from a shop somewhere in Kansas, and finished it off. I think it turned out really nice.

The other has a T/C factory 23" .223 with an American Manufacturing Triple-X Warrior.

I don't recall what scopes I had on them when the picture was taken. They've both been switched out since then.

Here's the .300 in pistol configuration:

Curtis · « **Reply #89 on:** July 15, 2012, 02:23:16 PM »

I have a 14" Contender barrel in 300 Whisper that is threaded. One of these days I'll spring for a supressor for it.

Curtis