« previous next »
Pages: [1]   Go Down

Author Topic: .38,.357mag, 357max. Powder?  (Read 892 times)

0 Members and 1 Guest are viewing this topic.

Offline pelican717

  • Trade Count: (49)
  • Contributor
  • ***
  • Posts: 259
  • Gender: Male
.38,.357mag, 357max. Powder?
« on: August 11, 2011, 04:03:30 PM »
I would like to use the same powder for all 3 of these loads. Is that possible? I think 2400 will work for .38 &.357,with 158gr LSWC bullets, but is there a 2400 load for 357max, 158 gr bullets?
Any help is appreciated.
Thanks, Robert
Logged

Offline shot1

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1064
Re: .38,.357mag, 357max. Powder?
« Reply #1 on: August 11, 2011, 04:19:38 PM »
My Hornady 7th edition list loads with 2400 for the 357 MAX for the 10 1/2" Ruger Super Blackhawk but not in the section for the T/C Contender.
125gr bullet start 19.2 max 21.5 for 1800 fps.
158/60 gr bullet start 14.9 max 19.1 for 1600 fps
180 gr bullet start 15.0 max 17.0 for 1400 fps.

Hope this gives you something to work with. H4227 would be another powder that would work for all three but you are into +P pressure with either 2400 or H4227 with the 38 special.
Logged

Offline lakota

  • Trade Count: (26)
  • Senior Member
  • *****
  • Posts: 3472
  • Gender: Male
Re: .38,.357mag, 357max. Powder?
« Reply #2 on: August 11, 2011, 05:22:53 PM »
I had a .357 Max Contender years ago. I'm not sure about the .38Spl but I think H110 will work in both 357 mag and 357 max
Logged
Hi NSA! Can you see how many fingers I am holding up?

Offline av-doctor

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 238
  • Gender: Male
Re: .38,.357mag, 357max. Powder?
« Reply #3 on: August 12, 2011, 05:39:28 AM »
quick look shows h4227 will work with all 3
Logged

Offline pelican717

  • Trade Count: (49)
  • Contributor
  • ***
  • Posts: 259
  • Gender: Male
Re: .38,.357mag, 357max. Powder?
« Reply #4 on: August 12, 2011, 12:08:20 PM »
Thanks for the help, guys.
Robert
Logged

Offline lakota

  • Trade Count: (26)
  • Senior Member
  • *****
  • Posts: 3472
  • Gender: Male
Re: .38,.357mag, 357max. Powder?
« Reply #5 on: August 14, 2011, 04:44:00 PM »
H4227 is good stuff. My current favorite for the .357 mag.
 
Not sure what kind of .357 Max you are shooting but I had a 16" T/C Contender. Its been a long time and I cant remember the charge or bullet weight but my favorite load was AA1680 and a Speer soft point bullet intended for the.35 Remington. I think it was a 200 gr bullet. I hunted deer with it but never got a shot. It did pretty good on the range though.
Logged
Hi NSA! Can you see how many fingers I am holding up?

Offline mechanic

  • GBO Supporter
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 5112
  • Gender: Male
Re: .38,.357mag, 357max. Powder?
« Reply #6 on: August 14, 2011, 04:45:25 PM »
Unique.
Logged
Molon Labe, (King Leonidas of the Spartan Army)

Offline pelican717

  • Trade Count: (49)
  • Contributor
  • ***
  • Posts: 259
  • Gender: Male
Re: .38,.357mag, 357max. Powder?
« Reply #7 on: August 16, 2011, 01:17:07 PM »
mechanic, any suggested loads for .38, 357mag, and 357max with unique?
Thanks, Robert.
Logged

Offline mechanic

  • GBO Supporter
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 5112
  • Gender: Male
Re: .38,.357mag, 357max. Powder?
« Reply #8 on: August 16, 2011, 03:27:16 PM »
No one powder is ideal for any of these loads, but there are book loads available from multiple sources for Unique in the 38 and 357, I worked up from 357 loads for my max.  I did not particularly like the results, but they were not terrible by any means.
 
http://parallaxscurioandrelicfirearmsforums.yuku.com/topic/20792/38-357-loaded-with-unique
 
Ben
Logged
Molon Labe, (King Leonidas of the Spartan Army)

Offline Doublebass73

  • GBO Supporter
  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 4579
Re: .38,.357mag, 357max. Powder?
« Reply #9 on: August 16, 2011, 04:10:21 PM »
IMR-4227 or 2400
Logged
"Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves."

---- William Pitt (the Younger), Speech in the House of Commons, November 18, 1783

Offline Steve E

  • Trade Count: (4)
  • Contributor
  • ***
  • Posts: 413
  • Gender: Male
Re: .38,.357mag, 357max. Powder?
« Reply #10 on: August 23, 2011, 03:53:44 PM »
Hodgon Lil'Gun and the Maxi seem to be made for each other. It works excellent in the Magnum also.

Steve E................
Logged
NRA Endowment Life Member
GOA Life Member
North American Hunting Club Life Member

Offline ratdog

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1000
Re: .38,.357mag, 357max. Powder?
« Reply #11 on: August 24, 2011, 06:12:04 AM »
i have been using winchester 231 a lot cleaner burning. use it in my 44mag+ special and 45's don't know about the 357 max.i used to us unique and 2400 years ago worked fine but dirty.
Logged
Pages: [1]   Go Up
« previous next »