« previous next »
Pages: [1]   Go Down

Author Topic: First .32 H&R insert done  (Read 1453 times)

0 Members and 1 Guest are viewing this topic.

Offline zoot686

  • Trade Count: (0)
  • Member
  • *
  • Posts: 26
First .32 H&R insert done
« on: August 21, 2011, 01:31:30 PM »
Just finished my first .32 H&R insert today.
18" long and sized for a 20 gauge.
Turned from a green mountain blank, and I recessed the muzzle by .040" to avoid damage that might occur to the muzzle if accidently bumped on the shotgun barrel breech while inserting it.
Probably won't get out this week to do any test firing, but I'll head to the local swamp this next weekend with my chrony and see what this little pistol cartridge will do through an 18" barrel.

Anyways here's a pic.
Logged

Offline jedman

  • GBO Supporter
  • Trade Count: (24)
  • A Real Regular
  • *****
  • Posts: 921
  • Gender: Male
  • Retired and livin the dream !
Re: First .32 H&R insert done
« Reply #1 on: August 21, 2011, 02:37:19 PM »
Looks good !!  I have made  quite a few similar to yours but I epoxy them in the shotgun barrel and mill a recess for the ejector / extractor. they have all been good shooters . 
  Its a great way to have a non factory caliber if you dont have the means to do threading.
            Jedman
Logged
Current handi family, 24 ga./ 58 cal ,50-70,  45 smokeless MZ, 44 belted bodeen, 44 mag,.375 H&R (wildcat),375 Win.,357 max, .340 MF ( wildcat ), 8 mm Lebel, 8x57, .303 British, 270 x 57 R,(wildcat) 256 Win Mag, 2 x 243 Win,2 x 223 Rem. 7-30 Waters &20ga.,

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: First .32 H&R insert done
« Reply #2 on: August 22, 2011, 06:04:32 AM »
I would do the bore measurements and make an O-Ring groove in the insert barrel for a snug, not hard, press in fit., then lube the O-Ring with a bore friendly slippery goo.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: First .32 H&R insert done
« Reply #3 on: August 22, 2011, 06:10:24 AM »
What gcrank said, that's how Larry did my Hornet insert, it's pretty accurate at 50yds.  ;)

Tim

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline fluffyphydeaux2010

  • Trade Count: (29)
  • Contributor
  • ***
  • Posts: 341
  • Gender: Male
Re: First .32 H&R insert done
« Reply #4 on: August 23, 2011, 08:10:30 AM »
i'd love one in 30 carbine. what do they cost?
Logged

Offline Old Fart

  • Intergalactic Moderator
  • GBO Supporter
  • Trade Count: (77)
  • Senior Member
  • *****
  • Posts: 3851
  • Gender: Male
Re: First .32 H&R insert done
« Reply #5 on: August 23, 2011, 09:29:08 AM »
Well it'll be time for a 327 mag ream soon..... ::)
Logged
"All my life I've had a bad case of the Fred's. Fredrick Vanderbilt taste on a Fred Sanford budget." CR
Lifetime/Endowment/Patron NRA Member.
Second Amendment Foundation, www.saf.org - Life Member

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: First .32 H&R insert done
« Reply #6 on: August 23, 2011, 12:12:16 PM »
Quote from: fluffyphydeaux2010 on August 23, 2011, 08:10:30 AM
i'd love one in 30 carbine. what do they cost?

MCA makes adapters and inserts.

Tim

http://www.mcace.com/
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: First .32 H&R insert done
« Reply #7 on: August 23, 2011, 12:34:39 PM »
+1 on the epoxy installation of the barrel insert.  Several hundred rounds of 45 Super down a 18.5" glued insert, no problems and 2" & better accuracy @ 100 yards.   And I don't have to worry about breakin' a nail trying to get a case out of the chamber because I have a fine workin' ejector. ;)
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: First .32 H&R insert done
« Reply #8 on: August 23, 2011, 02:15:42 PM »
'Breakin' a nail'....... ;D ;D ;D ;D
I am going to assume that those groups are with a scope and a fair rest; even so, well done!, but are they cast bullet loads?
I am going to have to start playing with my 30-30 at 32-20 ballistics loads again, but the typical open sights (big front bead) on the '94 carbine are not conducive to tight groups. They were promising a few years ago before I got 'sidetracked'.........
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: First .32 H&R insert done
« Reply #9 on: August 23, 2011, 03:42:42 PM »
Quote from: gcrank1 on August 23, 2011, 02:15:42 PM

I am going to assume that those groups are with a scope and a fair rest; even so, well done!, but are they cast bullet loads?

Both cast & jacketed, cast are handloads and the jacketed are factory ammo.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline jparedes

  • GBO Supporter
  • Trade Count: (0)
  • Avid Poster
  • *****
  • Posts: 103
Re: First .32 H&R insert done
« Reply #10 on: August 24, 2011, 07:10:07 AM »
Don't want to hijack the thread, but your reference to MCA inserts is much appreciated.

I have a 1980's  vintage 20 Gauge H&R shotgun and the prospect of getting an insert for it sounds very attractive.

Anybody knows if it would be safe to use a 30-30 Win insert on a shotgun like this?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: First .32 H&R insert done
« Reply #11 on: August 24, 2011, 07:28:33 AM »
30-30 was chambered in a few vintage models, M058, M157 and M158 for sure, the only issue I can see is the firing pin on the rifle versions was smaller, if you don't have primer issues, it should be fine.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Farrier Matt

  • Trade Count: (0)
  • Member
  • *
  • Posts: 67
Re: First .32 H&R insert done
« Reply #12 on: August 24, 2011, 03:10:50 PM »
Let us know how whe shoots! Could you do one on a 410? Im itching for a companion to my 32 single six.
Logged

Offline Littlepage

  • Trade Count: (0)
  • Member
  • *
  • Posts: 72
  • Gender: Male
Re: First .32 H&R insert done
« Reply #13 on: August 25, 2011, 04:24:33 PM »
How do you get the spent brass out of the insert?
 
Logged

Offline Farrier Matt

  • Trade Count: (0)
  • Member
  • *
  • Posts: 67
Re: First .32 H&R insert done
« Reply #14 on: August 26, 2011, 02:34:10 AM »
Quote from: Farrier Matt on August 24, 2011, 03:10:50 PM
Let us know how whe shoots! Could you do one on a 410? Im itching for a companion to my 32 single six.
Answered my own question.Guess youd have to use a 20 wouldnt you? .410-.312=.098/2=.049 Probably not enough meat huh? Where is this guy at? Id like one on my 20ga if hes interested.
Logged

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: First .32 H&R insert done
« Reply #15 on: August 26, 2011, 02:45:52 AM »
Quote from: quickdtoo on August 23, 2011, 12:12:16 PM
Quote from: fluffyphydeaux2010 on August 23, 2011, 08:10:30 AM
i'd love one in 30 carbine. what do they cost?

MCA makes adapters and inserts.

Tim

http://www.mcace.com/

I'm in the same boat as fluffyphydeaux2010 on the .30 Carbine insert. I'd like to get one as well but MCA does not make one in this caliber. I have a short adaptor of 12 gauge to 9mm. It works but I would much prefer an insert. MCA does not make any inserts or adaptors for .30 Carbine to any shotgun gauges....<><.... :)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: First .32 H&R insert done
« Reply #16 on: August 26, 2011, 04:03:30 PM »
I have tried to contact mca with no response for months
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun
Pages: [1]   Go Up
« previous next »