Author Topic: Carronade (Read 2515 times)

IvarForkbeard · « **on:** August 28, 2011, 11:19:47 AM »

I can say, thanks to a wonderful old machinist, my machining is coming along great, though my welding leaves something to be desired. I think my next project will be a carronade as I can weld a straight line fairly good, so a slot in the bottom of the barrel to add a block and those low slung trunnions will be a lot easier for me.

Zulu · « **Reply #1 on:** August 28, 2011, 12:49:08 PM »

A carronade with trunnions is a gunade. Like these.

A carronade has a lug on the bottom with a hole in it that accepts a pin that secures it to a carriage. Look at the pictures in this post.
Zulu

http://www.gboreloaded.com/forums/index.php/topic,239863.0.html

IvarForkbeard · « **Reply #2 on:** August 28, 2011, 02:02:34 PM »

This site http://www.oregon.gov/OPRD/PARKS/cannon_photos.shtml shows me a lot, how the slider carriage works, how the barrel is attached even down to the elevation screw. I will be referencing this page a lot.

Double D · « **Reply #3 on:** August 28, 2011, 04:12:00 PM »

Quote from: IvarForkbeard on August 28, 2011, 02:02:34 PM

This site http://www.oregon.gov/OPRD/PARKS/cannon_photos.shtml shows me a lot, how the slider carriage works, how the barrel is attached even down to the elevation screw. I will be referencing this page a lot.

The cannons in those pictures are the cannons in this post. http://www.gboreloaded.com/forums/index.php/topic,239863.0.html

Cannoneer · « **Reply #4 on:** August 29, 2011, 07:58:05 AM »

IvarForkbeard,
It sounds like you're planning to make what we here in the U.S. would call a true carronade. Instead of trunnions that are integrally cast with the barrel, the carronade has an under barrel loop/lug that holds an iron pivot pin, and the ends of the pin are held to the wood slide by capsuares. Your project sounds interesting; good luck. Here are some drawings provided to the board by "cannonmn", that you may find useful.

Quote from: cannonmn on November 28, 2009, 02:55:47 PM

The other drawings. You can see how the USN drawing I posted earlier seems to be an "adaptation" of this British drawing. The tube looks identical, but the carriage has changed.

http://i17.photobucket.com/albums/b62/cannonmn/miscforumsetc/forums49/IMG_1270.jpg
http://i17.photobucket.com/albums/b62/cannonmn/miscforumsetc/forums49/IMG_1271.jpg
http://i17.photobucket.com/albums/b62/cannonmn/miscforumsetc/forums49/IMG_1272.jpg
http://i17.photobucket.com/albums/b62/cannonmn/miscforumsetc/forums49/IMG_1273.jpg
http://i17.photobucket.com/albums/b62/cannonmn/miscforumsetc/forums49/IMG_1274.jpg
http://i17.photobucket.com/albums/b62/cannonmn/miscforumsetc/forums49/IMG_1268.jpg
http://i17.photobucket.com/albums/b62/cannonmn/miscforumsetc/forums49/IMG_1275.jpg
http://i17.photobucket.com/albums/b62/cannonmn/miscforumsetc/forums49/IMG_1276.jpg
http://i17.photobucket.com/albums/b62/cannonmn/miscforumsetc/forums49/IMG_1277.jpg
http://i17.photobucket.com/albums/b62/cannonmn/miscforumsetc/forums49/IMG_1278.jpg

IvarForkbeard · « **Reply #5 on:** August 30, 2011, 02:39:38 PM »

Thanks for all the diagrams, they will surely come in handy. Thought I would document this one from start to finish, so here goes.

First pass, truing the end

Starting to take down the breach area.

Oh yeah, my friend's 1934 Lima lathe.

Starting to drill.

Surface prep for steady rest and boring.

And starting to bore. As of end of the day, bore is at 1.6 inches, a bit more to go for golf ball dimension of 1.728-1.730. Powder chamber is 1"x1 1/4".

IvarForkbeard · « **Reply #6 on:** August 31, 2011, 12:45:55 PM »

Day two of the Carronade..
First off, I misidentified the lathe yesterday, the gear box is a Lima

The lathe is a Hendy

Starting to define the barrel

End of day results

Where can I find some wood for the slider and base?

Yes, my friend has a few hundred thousand board feet of lumber.

DaveSB · « **Reply #7 on:** September 01, 2011, 02:09:28 AM »

looking good!

IvarForkbeard · « **Reply #8 on:** September 01, 2011, 02:29:53 PM »

Forgot to take the camera with me today, so just an end of day photo. Bottom lug installed and back starting to take shape.

IvarForkbeard · « **Reply #9 on:** September 02, 2011, 10:06:42 AM »

DRAT DRAT DRAT! I was going to test fire it this weekend but guess who managed to walk out of their friends shop WITHOUT drilling the vent! DRAT! DID make the test bed for it.....

YEAH! Made it back to the shop and got the vent drilled smoke and fire this weekend!

RocklockI · « **Reply #10 on:** September 02, 2011, 07:34:18 PM »

IvarForkbeard , It looks very nice all around . I can feel your pain as I have gone to Seacoasts more than once forgetting something like that .

I drove there two days ago and nearly forgot my print ...... Duh .

I would go easy loading that chamber right off . Golfball bore, that 1"x1.250" chamber will produce some big recoil if loaded up. A fox ball would be murder .

Good work

Gary

KABAR2 · « **Reply #11 on:** September 02, 2011, 07:42:31 PM »

Cannoneer,
Thanks for posting those prints, that is going to be my next project.
IvarForkbeard,
your little cannon looks respectable, it's a shame you don't have a hand drill
and some bits at home then you could be shooting....

IvarForkbeard · « **Reply #12 on:** September 06, 2011, 01:31:53 PM »

https://www.facebook.com/video/video.php?v=239052129474028

Youtube was arguing with me, lets see if this works.

Double D · « **Reply #13 on:** September 06, 2011, 05:49:08 PM »

You have to be a member of face book to see that stuff and with all the security issues surrounding Facebook there is no way I'm going there.

Zulu · « **Reply #14 on:** September 06, 2011, 05:51:28 PM »

I'm a member of Facebook and I couldn't see either of them. It said they were not available.
Zulu

IvarForkbeard · « **Reply #15 on:** September 06, 2011, 06:08:53 PM »

Lets try this then.
200 grains FFg powder seems to be a real nice load here....

GGaskill · « **Reply #16 on:** September 06, 2011, 06:25:10 PM »

That works.

Cannoneer · « **Reply #17 on:** September 06, 2011, 09:02:28 PM »

Quote from: Double D on September 06, 2011, 05:49:08 PM

You have to be a member of face book to see that stuff and with all the security issues surrounding Facebook there is no way I'm going there.

Ditto: There are things about "facebook" that bring to mind Orwell's 1984, and I want no part of it.

IvarForkbeard,
You did well, I like the carronade, and it sounds like it's got a respectable report.

IvarForkbeard · « **Reply #18 on:** September 16, 2011, 01:22:56 PM »

Posted this in the "Making a new carriage look old" thread too.

Day 2 of the display base build, that bottom piece is the 8/4 oak, mortised so I could use a single piece. The part under the carronade itself that slides, is 3/4 walnut. First coat of tong oil completed on both

GGaskill · « **Reply #19 on:** September 16, 2011, 01:59:48 PM »

There are things about "facebook" that bring to mind Orwell's 1984, ...

With the decline in the education system experienced in the last several decades, I doubt that many under-30's have any understanding of 1984 references.

IvarForkbeard · « **Reply #20 on:** September 20, 2011, 07:58:15 AM »

Outside of replacing the aluminum wheels with brass when I get some more brass round stock, I think this is done.

It is on a firing deck that limits it to a 45 degree of movement

Slider is American black walnut, the pivoting base oak, and the shooting base multiple woods.

Aluminum wheels will be replaces with brass.

rifleshooter2 · « **Reply #21 on:** September 20, 2011, 08:45:31 AM »

Very Very Nice.

Andy

Cannoneer · « **Reply #22 on:** September 20, 2011, 10:58:59 PM »

Quote from: GGaskill on September 16, 2011, 01:59:48 PM

There are things about "facebook" that bring to mind Orwell's 1984, ...

With the decline in the education system experienced in the last several decades, I doubt that many under-30's have any understanding of 1984 references.

I wonder how many generations will have to pass before a far more advanced socialist president comes along, and decides that it would be desirable for all Americans to have a microchip implanted in their bodies; and the young will rejoice at this great technological leap forward, thinking how easy and accurate taking the census will then be.

IvarForkbeard,
I like the way that the platform turned out.