Author Topic: How many .458's? (Read 1022 times)

bikerbeans · « **Reply #1 on:** September 01, 2011, 04:39:11 PM »

Tom,

I hope you have the only H&R/NEF/Topper 458 WM.

If you are asking about 45-70s through 45-120s, I have three.

BB

oldsoldja · « **Reply #2 on:** September 01, 2011, 04:42:19 PM »

they say it will have 67 lbs of rearward thrust. Gonna take a steely eyed rocket man to fire it normally. I may tie it down and fire it with a pull rope.

quickdtoo · « **Reply #3 on:** September 01, 2011, 04:43:40 PM »

Hopefully only one, yours!

Tim

dave29 · « **Reply #4 on:** September 01, 2011, 04:43:51 PM »

Quote from: oldsoldja on September 01, 2011, 04:42:19 PM

they say it will have 67 lbs of rearward thrust. Gonna take a steely eyed rocket man to fire it normally. I may tie it down and fire it with a pull rope.

If you do that, make sure you video it.

oldsoldja · « **Reply #5 on:** September 01, 2011, 04:52:52 PM »

oh yea on video. Ill dig out my old high speed digital, we used to film bullets going thru stuff when the boys were little, i hope it still works. maybe put it on roller blades.

bikerbeans · « **Reply #6 on:** September 01, 2011, 04:55:58 PM »

From the recoil calculater @ handloads.com

500 grain bullet
75 grains of powder
2,350 FPS
9 pound gun

equals

76.6 pounds

just make sure you have someone with your to say "hey ya'll, watch this!"

Dinny · « **Reply #7 on:** September 01, 2011, 05:52:03 PM »

76.6 pounds!!!

Where's Tyler when you need him?

Thanks, Dinny

mechanic · « **Reply #8 on:** September 01, 2011, 06:34:32 PM »

I can recommend a good shoulder surgeon when you are ready..........

Ben

Austin from NC · « **Reply #9 on:** September 01, 2011, 08:07:14 PM »

If he shoots that he'll need a coroner, not a surgeon. Better make sure the life insurance is paid up. : )

Austin

gcrank1 · « **Reply #10 on:** September 02, 2011, 06:19:52 AM »

I have been known, like so many other boys, to like to see things go BANG!
But.......
I hope that you use a 45-70 equiv. load to test it and/or put all the components to good use

(I hate wasten' stuff anymore).

oldsoldja · « **Reply #11 on:** September 07, 2011, 12:49:51 AM »

Well its here. I must say the barrel is nice looking, deep colt black. Its an insert in a 10 gauge. The brake is nicely made and impressive looking. The stock set is mint and the first ive seen like it. Im going to see if the barrel sits on my other ten gauge and then give it camo stocks from the other 10 also. Ill turn it into a morphadite 45-70 black powder. All in all im satisfied that itll be usable.

gcrank1 · « **Reply #12 on:** September 07, 2011, 03:37:04 AM »

Im sure you can make some healthy level 2, 45-70 equiv. loads for it that would be lots o' fun, and Im sure 'real' .458s get loaded 'down' too.
Glad you didnt get burned too bad for the noble effort you have put into this.
We will wait, with baited breath, your pics and range report!

Plenty Coups · « **Reply #13 on:** September 07, 2011, 07:42:39 AM »

OMFG! Get this on video!!!!!!!!!!

spikehorn · « **Reply #14 on:** September 07, 2011, 04:00:03 PM »

If ya go with a full tilt 458 load let me know when you are going to shoot it so I step outside here in central N.Y. and listen to it! Wink

Graybeard · « **Reply #15 on:** September 07, 2011, 07:21:57 PM »

Since no one gets 2350 fps with the .458 in strong bolt guns I'd not bother using that for calculations. Most reports I've seen for factory loads and book handloads show closer to 2050 fps which is why the Lott was invented to get what the .458 was originally said to deliver and I seem to recall that is only about 2250 fps or a bit more. No I didn't look the numbers up am just going on memory but in the real world I don't think 2350 is realistic for a 500 grain.

bikerbeans · « **Reply #16 on:** September 08, 2011, 03:37:20 AM »

I agree the book loads for the 458 WM are not 2,350 fps but for this calculation I went to ammoguide.com. The maximum velocity for a 458 WM from ammoguide is 2,350 fps. I did however use the wrong powder weight, it should have been 81 grains not 75 grains, which would put the recoil over 79 pounds. I doubt Tom is going to try a 458 WM round in his new rifle so it really isn't a calculation that means a lot.

BB

gcrank1 · « **Reply #17 on:** September 08, 2011, 04:17:12 AM »

Just because we are talking big kickin' loads here, go to 'calpappas.com' and see the real deal.

bikerbeans · « **Reply #18 on:** September 08, 2011, 07:48:01 AM »

gcrank1,

thanks for the doubles link. I do think we need a law that says when someone's eyes get so bad that they need a scope they must sell their classic double rifles and buy bolt guns. It is a shame they put optics on some of those old rifles.

BB

gstewart44 · « **Reply #19 on:** September 08, 2011, 08:40:39 AM »

Quote from: bikerbeans on September 01, 2011, 04:55:58 PM

From the recoil calculater @ handloads.com

500 grain bullet
75 grains of powder
2,350 FPS
9 pound gun
equals
76.6 pounds
just make sure you have someone with your to say "hey ya'll, watch this!"

That's stout but the 12 g Federal 3.5" 2.25 oz turkey load at 1200 fps will kick back at 86.4 lbs or more depending on the weight of your shootgun! $:-\$

vk4ale · « **Reply #20 on:** September 08, 2011, 10:55:15 AM »

Hi all , I do have a 458win mag and have mild loads worked out with 405gn remington and 500gn h c for one in 14 twist 22in barrel if your rifle has normal chamber and throat, if you like.Cheers vk4ale.