« previous next »
Pages: [1]   Go Down

Author Topic: Got a 444!  (Read 496 times)

0 Members and 2 Guests are viewing this topic.

Offline AtlLaw

  • Moderators
  • Trade Count: (58)
  • Senior Member
  • *****
  • Posts: 6405
  • Gender: Male
  • A good woman, nice bike and fine guns!
Got a 444!
« on: September 02, 2011, 06:54:58 PM »
The barrel was waiting for me when I got home.   :D  I checked it on my 2 remaining receivers and put a .002 shim so it would fit the sloppy one.  The JB is setting up as we speak!   8)
 
'course it will just be added to the list of Handi's that I haven't had a chance to shoot yet...  :-\  A 30-30, a 500 and two 280's...  I gotta get out more!   :-[
 
In the meanwhile, can I load the 444 with 44 Mag dies if I only neck size?   ???  Wait!  I don't have any brass!   ::)  nuthins easy....   :'(
Logged
Richard
Former Captain of Horse, keeper of the peace and interpreter of statute.  Currently a Gentleman of leisure.
Nemo me impune lacessit

                      
Support your local US Military Vets Motorcycle Club

Offline dpe.ahoy

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 3363
  • Gender: Male
Re: Got a 444!
« Reply #1 on: September 02, 2011, 07:39:14 PM »
Welcome to the group of aquirers, Richard.  I got too many that ain't been shot yet, some not even out of the box. :'(   Too many toys, not enough time.  I think yer gonna get a S--- eatin grin on yer face when ya light this one up.  I like my T4's better than my 45-70's, maybe cause I'm just a bit off plumb. :-\ ;D   I'd say to load er up and come up for a hunt, but Montana has gotten real expensive for out of state permits.  You and Kathi still need to get up here.  DP  PS, Hornady LE flextip has shorter cases than regular 444 ammo.   DP
Logged
RIP Oct 27, 2017

Handi's:22Shot, 22LR, 2-22Mag, 22Hornet, 5-223, 2-357Max, 44 mag, 2-45LC, 7-30 Waters, 7mm-08, 280, 25-06, 30-30, 30-30AI, 444Marlin, 45-70, AND 2-38-55s, 158 Topper 22 Hornet/20ga. combo;  Levers-Marlins:Two 357's, 44 mag, 4-30-30s, RC-Glenfields 36G-30A & XLR, 3-35 Rem, M-375, 2-444P's, 444SS, 308 MX, 338Marlin MXLR, 38-55 CB, 45-70 GS, XS7 22-250 and 7mm08;  BLR's:7mm08, 358Win;  Rossi: 3-357mag, 44mag, 2-454 Casull; Winchesters: 7-30 Waters, 45Colt Trapper; Bolt actions, too many;  22's, way too many.  Who says it's an addiction?

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Got a 444!
« Reply #2 on: September 02, 2011, 09:05:02 PM »
Congrats Richard, sounds like the USPS finally came thru for ya!!  ;D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline AtlLaw

  • Moderators
  • Trade Count: (58)
  • Senior Member
  • *****
  • Posts: 6405
  • Gender: Male
  • A good woman, nice bike and fine guns!
Re: Got a 444!
« Reply #3 on: September 03, 2011, 06:08:15 AM »
Ya Tim, finally.  Still that lost check though.  You know, my father retired from the USPS and I remember he was quite dedicated to that service.  But, times change I guess.   :-\
 
OH!  And a 45 Colt BC Carbine!   ;D  I wonder if there are any more I haven't shot hiding out in the safes...  ???
 
OH! OH!  I also checked my shim job this morning.  Barrel and receiver are a perfect match!   ;D
Logged
Richard
Former Captain of Horse, keeper of the peace and interpreter of statute.  Currently a Gentleman of leisure.
Nemo me impune lacessit

                      
Support your local US Military Vets Motorcycle Club

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Got a 444!
« Reply #4 on: September 03, 2011, 12:22:15 PM »
Richard,
 
the 444M is tapered from .453 to .469 or so.  I don't load 44Mag but I think it has little to no taper.  If you get 444M brass that hasn't been proof tested you might be able to get away with a neck size only.  The shell plate you need for the 444M is also different than the 44mag so you probably need to send Mr. Lee $25 bucks for the 444M die set. ;D   Besides, when you get a price on 444M brass you will forget all about the cost of the die set. :o
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Got a 444!
« Reply #5 on: September 04, 2011, 05:24:48 AM »
When I loaded 444 (for a Marlin lever about 25yrs ago) I could 'neck size' the bullet holding top with the 44Spl die and got by, though it was futzy, for low pressure cast bullet loads. I ultimately got a 444 sizing die only and still used the Spl dies for the rest (did I tell you I was cheap?) and was glad I did.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Got a 444!
« Reply #6 on: September 04, 2011, 09:41:39 AM »
blake,
 
you ain't cheap, you are resourceful. ;)   In your honor I made a "die" that allows me to seat a 209 primer in a 410 hull, using a Lee Loadall 12 gauge press.  the "die" consists of an 18 mm 1/2 drive deep dish socket, 1" thin fender washer and a piece of tape.  Works great and was the right price. ;D
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Got a 444!
« Reply #7 on: September 04, 2011, 10:04:08 AM »
Was it 'duct tape' (we want Red Green to smile on us too)  ;D ;D ;D .
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline woodsrunner

  • Trade Count: (6)
  • Avid Poster
  • **
  • Posts: 105
  • Gender: Male
Re: Got a 444!
« Reply #8 on: September 05, 2011, 03:31:58 AM »
Good for you with the 444, I been thinkin' I need one of those. I don't know how you guys can stand to have those barrels settin' around and not play with them. Wellllll, I do have a untried 7X57, ana 30-30, ana 45/70, ana 357,ana a 410 ana aaaa-aw never mind, I just need a 444-woodsrunner
Logged
Good Hunting--Woodsrunner
Pages: [1]   Go Up
« previous next »