Author Topic: Wheeled soda can mortars  (Read 1263 times)

0 Members and 1 Guest are viewing this topic.

Offline dominick

  • GBO Sponsor
  • Trade Count: (21)
  • Senior Member
  • *****
  • Posts: 1367
  • Gender: Male
    • Black Powder Cannons & Mortars
Wheeled soda can mortars
« on: September 10, 2011, 10:38:41 AM »
I completed a pair of soda can mortars from some left over material. Photos below. Sorry, no  powder can.  The barrel length is 9-1/2" and the wheels are 16" diameter.   Test firing tomorrow. ;D







Offline KABAR2

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2830
Re: Wheeled soda can mortars
« Reply #1 on: September 10, 2011, 10:53:05 AM »

You have created an American Revolution item called a Moritzer the colonials were short on Howitzer's so someone got the bright idea to mount a mortar on a carriage allowing a mortar to step in for the much needed howitzers..... I know of a re-created one base on a 12 pounder ... fired with ball recoil sent it back further than expected..... these should be interesting to shoot!
Mr president I do not cling to either my gun or my Bible.... my gun is holstered on my side so I may carry my Bible and quote from it!

Sed tamen sal petrae LURO VOPO CAN UTRIET sulphuris; et sic facies tonituum et coruscationem si scias artficium

Offline dominick

  • GBO Sponsor
  • Trade Count: (21)
  • Senior Member
  • *****
  • Posts: 1367
  • Gender: Male
    • Black Powder Cannons & Mortars
Re: Wheeled soda can mortars
« Reply #2 on: September 10, 2011, 10:59:28 AM »
My quess is we will have to place a sandbag on the trail to keep it down.

Offline dittles

  • Trade Count: (0)
  • Member
  • *
  • Posts: 75
  • Gender: Male
Re: Wheeled soda can mortars
« Reply #3 on: September 10, 2011, 11:06:05 AM »
Dominick, at what angle do you plan on test firing them at?

Offline dominick

  • GBO Sponsor
  • Trade Count: (21)
  • Senior Member
  • *****
  • Posts: 1367
  • Gender: Male
    • Black Powder Cannons & Mortars
Re: Wheeled soda can mortars
« Reply #4 on: September 10, 2011, 11:40:11 AM »
They both belong to two other people now.  I think they may fire them at 45 degrees and horizontal.

Offline KABAR2

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2830
Re: Wheeled soda can mortars
« Reply #5 on: September 10, 2011, 12:25:44 PM »
My quess is we will have to place a sandbag on the trail to keep it down.
As long as it doesn't impede rearward movement or cause the trail to dig in... then they may flip...
Mr president I do not cling to either my gun or my Bible.... my gun is holstered on my side so I may carry my Bible and quote from it!

Sed tamen sal petrae LURO VOPO CAN UTRIET sulphuris; et sic facies tonituum et coruscationem si scias artficium

Offline little seacoast

  • GBO Supporter
  • Trade Count: (4)
  • A Real Regular
  • *****
  • Posts: 573
  • Gender: Male
  • Let them get just a little closer...
Re: Wheeled soda can mortars
« Reply #6 on: September 10, 2011, 12:54:38 PM »
Very nice indeed. Good thing they're already sold ;) .
America has no native criminal class except Congress.   Sam Clemens

Offline armorer77

  • GBO Sponsor
  • Trade Count: (8)
  • A Real Regular
  • ****
  • Posts: 541
  • Gender: Male
Re: Wheeled soda can mortars
« Reply #7 on: September 10, 2011, 01:49:05 PM »
Very nice , I will have to do one of mine like that . Ed

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Wheeled soda can mortars
« Reply #8 on: September 10, 2011, 02:05:24 PM »
You should add a drop down foot under the barrel for high angle fire so the axle doesn't have to carry the load.
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”
--Winston Churchill

Offline dittles

  • Trade Count: (0)
  • Member
  • *
  • Posts: 75
  • Gender: Male
Re: Wheeled soda can mortars
« Reply #9 on: September 10, 2011, 05:03:13 PM »
 What if one was to build a mortar with the trunnions on the sides and the barrel a couple of inches longer! How would that work for a small howitzer?

Offline intoodeep

  • GBO Supporter
  • Trade Count: (5)
  • A Real Regular
  • *****
  • Posts: 776
Re: Wheeled soda can mortars
« Reply #10 on: September 10, 2011, 05:16:23 PM »
What if one was to build a mortar with the trunnions on the sides and the barrel a couple of inches longer! How would that work for a small howitzer?

 dittles,

 I think what you are suggesting is something like a King Howitzer. The one below is a "Dom"  King Howitzer. Maybe, a little hair raising.....  :D :D   I know.. Bad Joke.  :(

If you make it idiot proof, then, someone will make a better idiot.


Offline dittles

  • Trade Count: (0)
  • Member
  • *
  • Posts: 75
  • Gender: Male
Re: Wheeled soda can mortars
« Reply #11 on: September 10, 2011, 05:24:44 PM »
intoodeep, I like! ;D

Offline dominick

  • GBO Sponsor
  • Trade Count: (21)
  • Senior Member
  • *****
  • Posts: 1367
  • Gender: Male
    • Black Powder Cannons & Mortars
Re: Wheeled soda can mortars
« Reply #12 on: September 20, 2011, 02:18:35 PM »

Offline dittles

  • Trade Count: (0)
  • Member
  • *
  • Posts: 75
  • Gender: Male
Re: Wheeled soda can mortars
« Reply #13 on: September 20, 2011, 04:54:34 PM »
Did you fire it without locking the wheels? I wanted to see that baby roll! ;D