« previous next »
Pages: [1]   Go Down

Author Topic: My ejector is drooping!  (Read 660 times)

0 Members and 3 Guests are viewing this topic.

Offline 44 Man

  • Trade Count: (28)
  • Senior Member
  • *****
  • Posts: 2419
  • Gender: Male
My ejector is drooping!
« on: September 29, 2011, 08:01:34 AM »
This has likely been handled before but I didn't find it in FAQ.  I recently received a wonderfully accurate 7-08 ejector barrel from Oldsoldja and installed it onto my .223 frame.  It fit wonderful the first time and only required a little stoning on the latch to increase the lockup.  The only problem I have is that the ejector droops when the barrel is fully open and the cartridge slides over it.  I have not owned an rimless ejector barrel before (my .223 being an extractor).  Not wanting to jam things up, I haven't tried to close the action that way so I can't say if it will slip in where it goes properly or not.  On my extractor barrel .223 the extractor stays up and the rim drops into it when loading.  The same with my old topper 30-30 ejector barrel.  So I'm thinking of adding more pressure to the little spring that holds the ejector up so the rim will drop into the proper place and the cartridge and ejector will both move forward together as the action is closed.  Is this the correct thing to do?  Or is it designed to droop and the cartridge slide home as you chamber it, then the ejector will drop under the rim as you close the action?  Thanks for a quick reply as I'm using a public computer since the home one is on the fritz!  (I can't believe how bad withdrawl is when I can't check Graybeard!)  44 Man
Logged
You are never too old to have a happy childhood!

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: My ejector is drooping!
« Reply #1 on: September 29, 2011, 08:29:17 AM »
Lewis, be thankful that's all that's drooping ::)   Patty's ejector 7mm-08 does the same thing and works fine......if you like ejectors.  This and the .32-20 are soon to be extractors.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline mechanic

  • GBO Supporter
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 5112
  • Gender: Male
Re: My ejector is drooping!
« Reply #2 on: September 29, 2011, 04:26:28 PM »
You might get something at one of those Canadian pharmacies....wait, different subject.
 
I have 2 that do the same.  As long as it chunks the case out you're ok.  It will slide under the rim as the barrel locks.
 
Ben
Logged
Molon Labe, (King Leonidas of the Spartan Army)

Offline phatgemi

  • GBO Supporter
  • Trade Count: (4)
  • Avid Poster
  • *****
  • Posts: 139
Re: My ejector is drooping!
« Reply #3 on: September 29, 2011, 05:59:20 PM »
I put a thin shim under mine. Takes care of the problem. I had exact same issue.
Logged

Offline Bill3006

  • Trade Count: (0)
  • Member
  • *
  • Posts: 71
Re: My ejector is drooping!
« Reply #4 on: September 29, 2011, 06:26:57 PM »
Pretty sure that's how it's supposed to work. I have two with ejectors. Push the cartridge all the way into the chamber, close action, shoot, and eject. Works every time.
Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: My ejector is drooping!
« Reply #5 on: September 30, 2011, 02:42:34 AM »
44,
 
If your ejector stays in that position for more than 4 hours you have to take it to a gunsmith. ::)   My exjector barrels are like yours so you should be good to go.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: My ejector is drooping!
« Reply #6 on: September 30, 2011, 05:42:48 AM »
As long as it ejects and doesn't miss the rim, what's to worry about.  8)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline 44 Man

  • Trade Count: (28)
  • Senior Member
  • *****
  • Posts: 2419
  • Gender: Male
Re: My ejector is drooping!
« Reply #7 on: September 30, 2011, 08:16:14 AM »
Thanks guys, I appreciate it.  Based our your feedback, I loaded an empty, dropped it all the way into the chamber, then closed the action.  Nothing jamed up.  Opened it again, and it ejected the empty just fine.  I did this several times and all is working fine.  I only noticed this drooping after I was at the range and I didn't want to jam it up there where I had no tools.  I guess I should have taken my targets and given the barrel a cigarette after this fine shooting session.  Thanks again.  44 Man
Logged
You are never too old to have a happy childhood!

Offline ironglow

  • GBO Supporter
  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 31302
  • Gender: Male
Re: My ejector is drooping!
« Reply #8 on: September 30, 2011, 08:18:11 AM »
Better get some gun oil with starch added.. ;)
   Glad you got the problem solved without complications..lots of help here..
Logged
If you don't want the truth, don't ask me.  If you want something sugar coated...go eat a donut !  (anon)

Offline AtlLaw

  • Moderators
  • Trade Count: (58)
  • Senior Member
  • *****
  • Posts: 6405
  • Gender: Male
  • A good woman, nice bike and fine guns!
Re: My ejector is drooping!
« Reply #9 on: September 30, 2011, 08:28:58 AM »
Hey Lewis!
 
My 7x57 has done that since I got it.  Seemed strange to me at the time but it's always worked fine!  I gave up wondering about it since it wasn't a problem!   ;D
Logged
Richard
Former Captain of Horse, keeper of the peace and interpreter of statute.  Currently a Gentleman of leisure.
Nemo me impune lacessit

                      
Support your local US Military Vets Motorcycle Club

Offline Fred McIntire

  • Trade Count: (31)
  • A Real Regular
  • ****
  • Posts: 582
  • Gender: Male
    • http://www.FredMcIntire.Com
Re: My ejector is drooping!
« Reply #10 on: September 30, 2011, 09:00:14 AM »
My ejector has been drooping since about the age of 45 . . . .  ;D
 
I have a .223 that does the same thing. It chambers and ejects fine. I was a little concverned too.
Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: My ejector is drooping!
« Reply #11 on: September 30, 2011, 10:04:12 AM »
Richard,
 
A drooping ejector in a 7x57 is very bad.  Please send me the barrel pronto and will take care of the problem. ::)
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline AtlLaw

  • Moderators
  • Trade Count: (58)
  • Senior Member
  • *****
  • Posts: 6405
  • Gender: Male
  • A good woman, nice bike and fine guns!
Re: My ejector is drooping!
« Reply #12 on: September 30, 2011, 11:59:18 AM »
Quote from: Fred McIntire on September 30, 2011, 09:00:14 AM
My ejector has been drooping since about the age of 45

MAN!  I'm not going to touch that one!   :-\   Wait...  ???   I didn't mean...  :-[ 
 
Nevermind...  :-X
 
Did y'all read Bean's post?
 
Quote from: bikerbeans on September 30, 2011, 10:04:12 AM
Please send me the barrel pronto and will take care of the problem. ::)

Sure is a bunch a folk hereabouts that want my barrel chambered in that ol' German .280 wannabe cartridge...  ;D
Logged
Richard
Former Captain of Horse, keeper of the peace and interpreter of statute.  Currently a Gentleman of leisure.
Nemo me impune lacessit

                      
Support your local US Military Vets Motorcycle Club

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: My ejector is drooping!
« Reply #13 on: September 30, 2011, 07:16:40 PM »
Quote from: AtlLaw on September 30, 2011, 11:59:18 AM
Quote from: bikerbeans on September 30, 2011, 10:04:12 AM
Please send me the barrel pronto and will take care of the problem. ::)

Sure is a bunch a folk hereabouts that want my barrel chambered in that ol' German .280 wannabe cartridge...  ;D

You can add me to that list.  ;D
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.
Pages: [1]   Go Up
« previous next »