Author Topic: SB2 44Mag  (Read 1124 times)

0 Members and 2 Guests are viewing this topic.

Offline ibgp3

  • Trade Count: (29)
  • A Real Regular
  • ****
  • Posts: 507
  • Gender: Male
  • Recovering after nearly 40 years of PTSD
SB2 44Mag
« on: October 12, 2011, 12:09:18 AM »

This is on gunbroker now.
The barrel is marked SB2 44Mag.
Is this a change?



Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: SB2 44Mag
« Reply #1 on: October 12, 2011, 12:34:31 AM »
No this is not a change. My 44 Mag barrel is marked the same, it is a 2007 vintage. My 30-30 barrel is marked the same and my 223 is SB2 "Ultra", while my 444 Marlin is not marked at all. The frame is what really makes them an SB2 or not. There have been many 357 and 44 barrels sold marked SB2 on the barrel, but are on an SB1 frame.

Good Luck and Good Shooting
Great men have vision and resolve to make dreams come true.

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: SB2 44Mag
« Reply #2 on: October 12, 2011, 03:18:54 AM »
The "CAC" prefix on the frame serial number indicates it is 2008 or later production SB1 receiver.   
 
BB
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline JMcDonald

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 136
Re: SB2 44Mag
« Reply #3 on: October 12, 2011, 04:48:39 AM »
How did they figure that a .44mag running 35k+ and pushing a 180gr bullet out at 2300fps is less hard on frames than a .223 or .30-30?

Offline Randy Morring

  • Trade Count: (0)
  • Member
  • *
  • Posts: 30
  • Gender: Male
Re: SB2 44Mag
« Reply #4 on: October 12, 2011, 05:54:01 AM »
I just bought a NIB 30-30 and it has a marking on the barrel that is strange. Its a small oval with "REP" in it. Any ideas what it means?
 
Randy
 

 
 
 
------------------------------------------------------------
                              DADD
            Dads Against Daughters Dating
"Shoot the first guy and the word will spread"

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: SB2 44Mag
« Reply #5 on: October 12, 2011, 06:21:45 AM »
Randy,
Dang, you got good eyes.  You made me check both my 30-30's, and neither one has that marking.  I have no clue.  Maybe Quick, or Brian would be able to answer your question.
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline Randy Morring

  • Trade Count: (0)
  • Member
  • *
  • Posts: 30
  • Gender: Male
Re: SB2 44Mag
« Reply #6 on: October 12, 2011, 06:26:14 AM »
Randy,
Dang, you got good eyes.  You made me check both my 30-30's, and neither one has that marking.  I have no clue.  Maybe Quick, or Brian would be able to answer your question.

Good eyes....not at all....lol....I just noticed it while looking it over when I pulled it out of the box and had to get a magnifying glass to see what it was...lol....bad eyes !!!
 
Randy
------------------------------------------------------------
                              DADD
            Dads Against Daughters Dating
"Shoot the first guy and the word will spread"

Offline jjas

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 275
Re: SB2 44Mag
« Reply #7 on: October 12, 2011, 10:01:08 AM »
I could be wrong but I thought the REP stamp was a Remington stamp.  Interested to find out for sure.  My .357 has the same mark.

Offline Randy Morring

  • Trade Count: (0)
  • Member
  • *
  • Posts: 30
  • Gender: Male
Re: SB2 44Mag
« Reply #8 on: October 12, 2011, 11:54:17 AM »
I could be wrong but I thought the REP stamp was a Remington stamp.  Interested to find out for sure.  My .357 has the same mark.

 
I sent Brian a PM and here is his reply:
 
 
  Re: Barrel Stamp     Hi Randy!!

                  It is a proof mark. It stands for (Remington Proof). It means that the barrel was proofed at the factory & is safe to use.
                                                                                                                         Brian@Remington:
     So now we know......Thanks Brian.       Randy
------------------------------------------------------------
                              DADD
            Dads Against Daughters Dating
"Shoot the first guy and the word will spread"

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: SB2 44Mag
« Reply #9 on: October 12, 2011, 04:12:51 PM »
How did they figure that a .44mag running 35k+ and pushing a 180gr bullet out at 2300fps is less hard on frames than a .223 or .30-30?

One is a straight wall cartridge and the other two are bottleneck cartridges.
 
 
 
Spanky