« previous next »
Pages: [1]   Go Down

Author Topic: Um, Help with fitting an old barrel  (Read 756 times)

0 Members and 1 Guest are viewing this topic.

Offline bighunt

  • Doctor of Shootology
  • Trade Count: (1)
  • Member
  • *
  • Posts: 24
  • Gender: Male
  • Shooter, Hunter, Reloader. 100% ate up Gun Nut!
Um, Help with fitting an old barrel
« on: October 13, 2011, 10:28:24 AM »
I recently bought an old .410 barrel with a brazed on locking lug.  I am wanting to reweld this lug on a .30 caliber barrel blank and chamber it in 7.62x25 Tok or 30 Mauser. I am having a problem getting the barrel to even fit on my frame.  The pin that activates the ejector seems to be in the wrong location and closing the barrel on the action is very difficult as is opening it.  Once the pin passes the shoulder in the reciever the barrel locks up fine, but getting it fully open or closed is a real pain.
 
Any Suggestions?
Logged
If it has a barrel and shoots bullets I am interested in it and if I don't have one I want one.  Never met a gun I didn't like.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Um, Help with fitting an old barrel
« Reply #1 on: October 13, 2011, 02:18:27 PM »
If its a really old 410 it may have been for the small frame they used to make.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Um, Help with fitting an old barrel
« Reply #2 on: October 13, 2011, 03:00:43 PM »
Yah I don't have a picture of mine, but it's circa 1926ish lol  My grand dad bought it and it has a very smooth no bump barrel.  Frame is equally smaller. 
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Um, Help with fitting an old barrel
« Reply #3 on: October 13, 2011, 03:19:31 PM »
What a sweet 32-20 or 25-20 that would make!
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Um, Help with fitting an old barrel
« Reply #4 on: October 13, 2011, 03:54:12 PM »
hehe makes a sweet .410 too.  ;)  It was my grandpa's first gun, so it'll never be a stub.  lol
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Um, Help with fitting an old barrel
« Reply #5 on: October 13, 2011, 05:22:57 PM »
Now if BigHunts barrel turned out to be one of those and fit your frame.............. ;)
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Um, Help with fitting an old barrel
« Reply #6 on: October 13, 2011, 05:31:25 PM »
Ah, gotcha hehe.  Was looking a different way and pow, ya got me wit the left.  ;) 
Question to Bighunt: Does it have a screw mount style barrel stud or a stud with a little notch in it for a slip-on forearm?
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • GBO Supporter
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: Um, Help with fitting an old barrel
« Reply #7 on: October 14, 2011, 05:13:33 AM »
It may also be from one of the "Folding" guns they were on the Light Frame also they were non ejecting.Is yours an ejector for sure? Kurt
Logged
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline bighunt

  • Doctor of Shootology
  • Trade Count: (1)
  • Member
  • *
  • Posts: 24
  • Gender: Male
  • Shooter, Hunter, Reloader. 100% ate up Gun Nut!
Re: Um, Help with fitting an old barrel
« Reply #8 on: October 14, 2011, 05:26:25 AM »
Quote from: tacklebury on October 13, 2011, 05:31:25 PM
Ah, gotcha hehe.  Was looking a different way and pow, ya got me wit the left.  ;) 
Question to Bighunt: Does it have a screw mount style barrel stud or a stud with a little notch in it for a slip-on forearm?

It has the notched stud forend retainer, and a low profile breech with a groove down the top. The bore is a little dirty/pitted and the ejector is broken, but the stud still locks in ad is very positive so I think it would be an easy fix.
Logged
If it has a barrel and shoots bullets I am interested in it and if I don't have one I want one.  Never met a gun I didn't like.

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Um, Help with fitting an old barrel
« Reply #9 on: October 15, 2011, 11:44:54 AM »
Hmm, not like mine then.  Same stud sounds like, but mine has no line down the top.  8(
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Um, Help with fitting an old barrel
« Reply #10 on: October 16, 2011, 04:23:43 AM »
My Gramp's old Iver Johnson has a groove down the top of the barrel (chamber) swell.
Does your actually say H&R on it?
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline bighunt

  • Doctor of Shootology
  • Trade Count: (1)
  • Member
  • *
  • Posts: 24
  • Gender: Male
  • Shooter, Hunter, Reloader. 100% ate up Gun Nut!
Re: Um, Help with fitting an old barrel
« Reply #11 on: October 17, 2011, 05:01:10 AM »
Quote from: gcrank1 on October 16, 2011, 04:23:43 AM
My Gramp's old Iver Johnson has a groove down the top of the barrel (chamber) swell.
Does your actually say H&R on it?

No, I don't think it does.
".410 Gauge"
"Choke Bored"
 
Thats the best I can recall it saying. I know for sure it uses the word "Gauge" instead of "Bore" after .410.
Logged
If it has a barrel and shoots bullets I am interested in it and if I don't have one I want one.  Never met a gun I didn't like.
Pages: [1]   Go Up
« previous next »