« previous next »
Pages: [1]   Go Down

Author Topic: Tamer Stock - Looking for Ideas  (Read 951 times)

0 Members and 2 Guests are viewing this topic.

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Tamer Stock - Looking for Ideas
« on: October 23, 2011, 04:19:20 PM »
Hi All,
 
Just picked up a new take off Tamer stock set off a 20 ga.  I wanted this shorter stock to put on my 45 ACP so my 14 year old daughter can shoot it.  I put a slip on Limbsaver on it and it is just long enough for me to shoot.   Anyway what I want to do is make a cartridge holder for 45 ACP that fits in the relief on the tamer stock.  I have had several ideas but none I want to follow through on.  Looking for ideas on how to make a cartridge holder that will be secure and not be proud to the stock.  Although I was born in Kentucky, I have ruled out duct taping a 50 rd box of 45 ACP into the recess. ;D   Also, anybody who wants the 20 gage shell holder off this stock send me a PM and I will mail it to you.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline Rotten RJ

  • GBO Supporter
  • Trade Count: (66)
  • Avid Poster
  • *****
  • Posts: 243
  • Gender: Male
  • "Initial success or total failure."
Re: Tamer Stock - Looking for Ideas
« Reply #1 on: October 23, 2011, 04:57:47 PM »
BB
I could use one o those 20ga. shellholders for the Tamer stock.  PM on the way.
Many thanks,
RJ
Logged
US Army (ret) EOD Master Blaster

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Tamer Stock - Looking for Ideas
« Reply #2 on: October 23, 2011, 05:20:14 PM »
There ar other makes I'm sure, but what if you made a leather piece like this and then just epoxied it into the recess.  I don't have that style stock, so not sure what length would work.  With stubby .45 acp, however, I think you could put a row at the top and a row at the bottom possibly.  ;)
 
http://www.diamonddcustomleather.com/Guides_Choice_Reload.php
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Tamer Stock - Looking for Ideas
« Reply #3 on: October 24, 2011, 05:27:22 AM »
How about that Kydex (sp?) that knifemakers are using for sheaths, BB? Its a plastic that can be, IIRC, soaked in hot water and shaped pretty easily. I think I remember seeing some pop riveted together.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Rotten RJ

  • GBO Supporter
  • Trade Count: (66)
  • Avid Poster
  • *****
  • Posts: 243
  • Gender: Male
  • "Initial success or total failure."
Re: Tamer Stock - Looking for Ideas
« Reply #4 on: October 24, 2011, 07:09:46 AM »
BB,
How about this?
It's the plastic 10 round holders from Federal rifle ammo. (30-06 family) with the bottom half trimmed away.  It could be attached with a velcro backing or screwed directly to the stock.
RJ
Logged
US Army (ret) EOD Master Blaster

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Tamer Stock - Looking for Ideas
« Reply #5 on: October 24, 2011, 08:17:48 AM »
Quote from: Rotten RJ on October 24, 2011, 07:09:46 AM
BB,
How about this?
It's the plastic 10 round holders from Federal rifle ammo. (30-06 family) with the bottom half trimmed away.  It could be attached with a velcro backing or screwed directly to the stock.
RJ

We have a winner! ;D   The entire gun is getting a custom refinish (few coats of rustoleum matte black textured spray paint) and I think the plastic shell holder should take paint just fine.  Thanks RJ and all who responded.  Now I got to go root throught the trash cans at the gun club for an MT box of Federal '06. ;)
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline Rotten RJ

  • GBO Supporter
  • Trade Count: (66)
  • Avid Poster
  • *****
  • Posts: 243
  • Gender: Male
  • "Initial success or total failure."
Re: Tamer Stock - Looking for Ideas
« Reply #6 on: October 24, 2011, 08:50:15 AM »
BB,
If'n ya can't find one at the gun club, lemme know.  I'm sure I have a few more and can easily get one to ya.
RJ
Logged
US Army (ret) EOD Master Blaster

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Tamer Stock - Looking for Ideas
« Reply #7 on: October 24, 2011, 12:57:34 PM »
BB, go to your local auto body shop (or maybe one of our guys will give you a specific rattlecan product here) and ask about the primer they use for the plastic car parts. It makes the paint stick to the plastic better.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Lon371

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 2486
  • Gender: Male
  • Why Not a Handi?
Re: Tamer Stock - Looking for Ideas
« Reply #8 on: October 24, 2011, 02:44:10 PM »
Quote from: gcrank1 on October 24, 2011, 12:57:34 PM
BB, go to your local auto body shop (or maybe one of our guys will give you a specific rattlecan product here) and ask about the primer they use for the plastic car parts. It makes the paint stick to the plastic better.

You can get that primer for plastic at autozone, pepboys and I think Napa.
Lonny
Logged

Offline kaveman

  • Trade Count: (7)
  • Member
  • *
  • Posts: 94
Re: Tamer Stock - Looking for Ideas
« Reply #9 on: October 27, 2011, 07:27:45 AM »
Krylon fusion is made to bond to plastics just ruff it up with scotch brite pad should work fine by the way the duct tape comment made me spray water all over my desk at work the federal holder is great idea
                                       Kaveman
Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Tamer Stock - Looking for Ideas
« Reply #10 on: October 27, 2011, 11:59:27 PM »
I got lucky, found a Remington BLACK plastic sheller holder, 30-30 green box, so no paint needed and it holds the 45 ACP cartridges very snuggly.

BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Tamer Stock - Looking for Ideas
« Reply #11 on: October 28, 2011, 04:17:00 PM »
Perfect.  ;)
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Pages: [1]   Go Up
« previous next »