« previous next »
Pages: [1]   Go Down

Author Topic: LIGHT PRIMER STRIKE AGAIN  (Read 1306 times)

0 Members and 1 Guest are viewing this topic.

Offline lendar

  • Trade Count: (1)
  • Member
  • *
  • Posts: 95
LIGHT PRIMER STRIKE AGAIN
« on: October 25, 2011, 02:20:04 PM »
I am sure now that the  transfer bar on one of my handi rifles is falling prior to the hammer strike.  I have no idea why this is going on, I have changed every part in the rifle and it still goes on.  This is not all the time.  When the gun fires you can hear the click of the transfer bar when you let off the trigger.  When it fails to fire and you let off the trigger you hear no click.  This rifle was also back to the factory a while back for this same problem.  When the gun does fire, I get a nice firing pin strike, when it does not I get a light strike.  This happens with all the barrels that fit on this frame.  I have several handies and this is the only one that has this problem so the way I pull the trigger has nothing to do with it.  Does anyone know the fix to this?  I am thinking about pulling the transfer bar and going with one of the old hammer to fix this.  Can this be done, and has anyone does this?  I understand the transfer bar is a safety thing but I only shoot this off the bench.
Logged

Offline Brian56

  • GBO Supporter
  • Trade Count: (5)
  • Member
  • *****
  • Posts: 62
  • Gender: Male
Re: LIGHT PRIMER STRIKE AGAIN
« Reply #1 on: October 25, 2011, 02:52:09 PM »




     Send your gun with a note
as to your problems that you are having, Attn: Brian Johnson, And I will take care of it for you. I will make this right by you. Just give me a chance, Please.


                                                                                                                   Brian@Remington.com:
Logged
Brian@Remington

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: LIGHT PRIMER STRIKE AGAIN
« Reply #2 on: October 25, 2011, 02:52:42 PM »
Most likely the Striker portion of the t-bar assembly is the 'short one' with too much chamfer on the leading edge (to slide it up past the firing pin into position).
Watch all this happen:
You cock it and the T-bar lifts
Pull the trigger and the Trigger Extension moves foreward to hold the T-bar in position (inside, so imagine this and you may also see a slight rise in height of the T-bar)
BUT
As the hammer falls the too short Striker with the chamfer at the F-pin gets hit, and the Striker is pinched out below, just like a watermelon seed
Result: light strike and the assembly is fully down
The currently used T-bar is a little taller (it still has to fit up under the hammer nose at the top stop) and has a bit less chamfer. The problematic ones Ive seen, when cocked, sit just barely to the top of the F-pin.
There are some very nice pics of this in some recent posts.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline michael_richardson43

  • GBO Supporter
  • Trade Count: (4)
  • Member
  • *****
  • Posts: 49
Re: LIGHT PRIMER STRIKE AGAIN
« Reply #3 on: October 25, 2011, 03:24:51 PM »
Send it to Brian. He will make it right.
Logged

Offline DukeInMaine

  • Salty Dog
  • GBO Supporter
  • Trade Count: (0)
  • Member
  • *****
  • Posts: 31
  • Gender: Male
  • Salty Dog
Re: LIGHT PRIMER STRIKE AGAIN
« Reply #4 on: October 26, 2011, 03:17:39 PM »
I also vote for sending it to Brian!


Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: LIGHT PRIMER STRIKE AGAIN
« Reply #5 on: October 26, 2011, 03:40:24 PM »
By all means, send it to Brian.  You'll be much more than pleased when it comes home. :D :D

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline lendar

  • Trade Count: (1)
  • Member
  • *
  • Posts: 95
Re: LIGHT PRIMER STRIKE AGAIN
« Reply #6 on: October 26, 2011, 04:59:39 PM »
It left for Brian's magic touch this morning.  Will let everyone know how it turns out.
Logged

Offline lendar

  • Trade Count: (1)
  • Member
  • *
  • Posts: 95
Re: LIGHT PRIMER STRIKE AGAIN
« Reply #7 on: November 10, 2011, 01:35:03 AM »
Its back and I tested it with several barrels and all is fine.  Its impossible to thank Brian enough for the help he gives people on this forum.  I also asked for Brian to install a 7.62X39 barrel on this frame while he had it and he did.  I shot that just a little yesterday and that barrel is sure nice.  Thanks again, Brian, we are sure lucky that someone like you works for Remington.
Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: LIGHT PRIMER STRIKE AGAIN
« Reply #8 on: November 10, 2011, 08:41:34 AM »
I am glad you got your receiver fixed and very glad that Brian is available to help up out.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: LIGHT PRIMER STRIKE AGAIN
« Reply #9 on: November 10, 2011, 01:23:40 PM »
Quote from: petemi on October 26, 2011, 03:40:24 PM
By all means, send it to Brian.  You'll be much more than pleased when it comes home. :D :D

Pete

See, I told ya so ;D :D ;D ;) :D ;D ;)    Thanks again, Brian, from all of us.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline Winter Hawk

  • Trade Count: (47)
  • Senior Member
  • *****
  • Posts: 1947
  • Gender: Male
Re: LIGHT PRIMER STRIKE AGAIN
« Reply #10 on: November 10, 2011, 02:20:20 PM »
Thanks to Brian from me also!  You are a good man, hope that Remington/Marlin/NEF/H&R appreciate you.  We sure do.

-Kees-
Logged
"All you need for happiness is a good gun, a good horse and a good wife." - D. Boone

Offline gjgalligan

  • Trade Count: (0)
  • Member
  • *
  • Posts: 47
  • Gender: Male
Re: LIGHT PRIMER STRIKE AGAIN
« Reply #11 on: November 11, 2011, 01:37:32 PM »
Quote from: lendar on November 10, 2011, 01:35:03 AM
Its back and I tested it with several barrels and all is fine.  Its impossible to thank Brian enough for the help he gives people on this forum.  I also asked for Brian to install a 7.62X39 barrel on this frame while he had it and he did.  I shot that just a little yesterday and that barrel is sure nice.  Thanks again, Brian, we are sure lucky that someone like you works for Remington.

How can you get a barrel that is not listed on the web site?
Logged

Offline lendar

  • Trade Count: (1)
  • Member
  • *
  • Posts: 95
Re: LIGHT PRIMER STRIKE AGAIN
« Reply #12 on: November 12, 2011, 01:45:59 AM »
You need to send a PM to Brian56 and he will let you know if any 7.62X39 barrels are in stock.  He works for Remington and has been very helpful to myself and all the people from this site.  Because of him I now own a 35 Remington and a 7.62X39 barrel.
Logged
Pages: [1]   Go Up
« previous next »