Author Topic: *Expanded* T/C Venture Rifle Recall by Smith & Wesson  (Read 1134 times)

0 Members and 1 Guest are viewing this topic.

Offline JustaShooter

  • Trade Count: (23)
  • Senior Member
  • *****
  • Posts: 1027
  • Gender: Male
*Expanded* T/C Venture Rifle Recall by Smith & Wesson
« on: November 09, 2011, 03:14:45 PM »
Smith & Wesson has announced a recall of recently-made Thompson/Center (T/C) Venture rifles due to a potential defect involving the sears on some Venture rifles produced from August 1, 2011 to October 28, 2011. The text of S&W’s Recall Notice, along with a link to the list of serial numbers of affected T/C Venture rifles, are provided below.

http://www.smith-wesson.com/webapp/wcs/stores/servlet/Category4_750001_750051_777653_-1_757978_757978_image
Quote
SAFETY RECALL NOTICE – November 7, 2011

DESCRIPTION OF THE HAZARD:
During an internal technical review, Smith & Wesson determined that some of the sears used on Venture rifles produced from August 1, 2011 to October 28, 2011, may not have been manufactured to specification. Because the sear is an important part of the firing mechanism, we are asking that all of the rifles produced during this time period be returned to Smith & Wesson so that the firearm can be inspected by our technicians to ensure that the rifle operates in a safe and appropriate manner.

DESCRIPTION OF THE PRODUCT INVOLVED:
This recall applies only to Venture rifles manufactured from August 1, 2011 to October 28, 2011. To determine if your rifle is affected, please reference the serial number list located at the link below or by calling Smith & Wesson directly at 1-800-713-0356. If your serial number does not fall within the list of affected serial numbers, your rifle is not part of this recall. CLICK HERE For List of Recalled Serial Numbers.

REMEDY/ACTION TO BE TAKEN:
STOP USING YOUR RIFLE. Any unintended discharge of a firearm has the potential to cause injury, and we ask that you stop using your rifle until we have an opportunity to inspect the sear to make certain that there is no condition which will allow the rifle to fire without the trigger being pulled.

To facilitate the inspection and repair, if necessary, of your rifle sear, please contact Smith & Wesson’s customer service department to receive instructions and a prepaid return label for the return of your rifle to Smith & Wesson.

When you return your rifle to Smith & Wesson, be sure to attach the completed information card received from Smith & Wesson, so that your sear can be inspected and repaired, and returned to you as quickly and efficiently as possible.

CONSUMER CONTACT:
Please contact Smith & Wesson directly at 1-800-713-0356, or at venturerecall@smith-wesson.com to arrange for the inspection and repair, if necessary, of your rifle.
Christian, Husband, Father
NRA Life Member
NRA Certified Range Safety Officer

Anything I post in these forums is my personal opinion formed by my own interpretation of the topic.
IANAL and anything I say is not intended to be nor should it be taken as legal advice.

Offline JustaShooter

  • Trade Count: (23)
  • Senior Member
  • *****
  • Posts: 1027
  • Gender: Male
Re: T/C Venture Rifle Recall by Smith & Wesson
« Reply #1 on: November 09, 2011, 03:21:15 PM »
The link to Smith & Wesson isn't working right now, so here's a link to another reputable source (I hope it isn't inappropriate to link there, if so please remove it moderators):

http://bulletin.accurateshooter.com/2011/11/tc-venture-rifles-recalled-by-smith-wesson/

Just a Shooter
Christian, Husband, Father
NRA Life Member
NRA Certified Range Safety Officer

Anything I post in these forums is my personal opinion formed by my own interpretation of the topic.
IANAL and anything I say is not intended to be nor should it be taken as legal advice.

Offline JustaShooter

  • Trade Count: (23)
  • Senior Member
  • *****
  • Posts: 1027
  • Gender: Male
Re: *Expanded* T/C Venture Rifle Recall by Smith & Wesson
« Reply #2 on: November 14, 2011, 03:01:15 PM »
Smith & Wesson has expanded its recall to include ALL T/C Venture Rifles manufactured prior to October 28, 2011.

New recall info:

Quote
    Expanded Recall of Thompson/Center (T/C) Venture Rifles
This broadens the recall announced by Smith & Wesson on November 8, 2011. This recall applies to ALL Venture rifles manufactured prior to October 28, 2011. To determine if your rifle is affected, please reference the serial number list located at www.smith-wesson.com/venturerecall or by calling Smith & Wesson directly at 1-800-713-0356. If your serial number does not fall within the list of affected serial numbers, your rifle is not part of this recall.

REMEDY/ACTION TO BE TAKEN: STOP USING YOUR RIFLE. Any unintended discharge of a firearm has the potential to cause injury or death, and we ask that you stop using your rifle until we have an opportunity to inspect the sear to make certain that there is no condition which will allow the rifle to fire without the trigger being pulled. To facilitate the inspection and, if necessary, repair of your rifle, please contact Smith & Wesson’s customer service department to receive instructions and a prepaid return label for the return of your rifle to Smith & Wesson. When you return your rifle to Smith & Wesson, be sure to attach the completed information card received from Smith & Wesson, so that your rifle can be returned to you as quickly and efficiently as possible.

CONSUMER CONTACT: Please contact Smith & Wesson directly at 1-800-713-0356, or at venturerecall@smith-wesson.com to arrange for the inspection and repair of your rifle.
Christian, Husband, Father
NRA Life Member
NRA Certified Range Safety Officer

Anything I post in these forums is my personal opinion formed by my own interpretation of the topic.
IANAL and anything I say is not intended to be nor should it be taken as legal advice.