« previous next »
Pages: [1]   Go Down

Author Topic: oops...  (Read 1329 times)

0 Members and 3 Guests are viewing this topic.

Offline Joe S.

  • Trade Count: (30)
  • A Real Regular
  • ****
  • Posts: 843
  • Gender: Male
  • The poisonous mushroom!
oops...
« on: November 17, 2011, 03:23:20 AM »
had a customer last night bring this Handi rifle back. crappy pics and i apologize for that but all i had was my phone camera...
customer said he had taken it to the range to sight it in and couldnt get it on paper. then he had the man at the indoor range re-boresight it and try to sight it in as well. after a few shots they realised what the problem was so he brought it in... :o
 
we are gonna exchange it for him and send it back to H&R...
 
whats wrong with this picture?
the marking on the barrel reads:
caliber .444 marlin

 
here is the muzzle of the same rifle... :o

 
not bashing cause i know mistakes happen and i can live with that, just sharing with yall...
Logged
Joe S.
Central MS

"An armed society is a polite society."

redistribute work ethic!

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: oops...
« Reply #1 on: November 17, 2011, 03:29:24 AM »
What does it mic at can't tell from picture
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline ibgp3

  • Trade Count: (29)
  • A Real Regular
  • ****
  • Posts: 507
  • Gender: Male
  • Recovering after nearly 40 years of PTSD
Re: oops...
« Reply #2 on: November 17, 2011, 03:42:02 AM »
It's a 500S&W  ??
Logged

Offline Joe S.

  • Trade Count: (30)
  • A Real Regular
  • ****
  • Posts: 843
  • Gender: Male
  • The poisonous mushroom!
Re: oops...
« Reply #3 on: November 17, 2011, 03:59:21 AM »
0.500"-ish

It is chambered for the 444 marlin as marked on the barrel but the bore is definately NOT for a 44 caliber.
Logged
Joe S.
Central MS

"An armed society is a polite society."

redistribute work ethic!

Offline silver surfer

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 126
  • Gender: Male
Re: oops...
« Reply #4 on: November 17, 2011, 04:57:58 AM »
Oooooh that's not good!  Great catch on y'alls part Joe.  Enjoy opening weekend!
Logged
"Blamin a gun for shootin people is like blamin your pencil for misspellin a word!"
  Larry the Cable Guy

Offline Joe S.

  • Trade Count: (30)
  • A Real Regular
  • ****
  • Posts: 843
  • Gender: Male
  • The poisonous mushroom!
Re: oops...
« Reply #5 on: November 17, 2011, 05:02:10 AM »
Thanks! Hope to! Got a friend bringin his son out saturday. Hope the deer and weather cooperate. :)

You too!
Logged
Joe S.
Central MS

"An armed society is a polite society."

redistribute work ethic!

Offline redlinecustomsms

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
Re: oops...
« Reply #6 on: November 17, 2011, 06:12:27 AM »
Wow. At least the bore is bigger than .44 and not a lot smaller!
Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: oops...
« Reply #7 on: November 17, 2011, 06:37:24 AM »
I hope it is a 500 S&W barrel and not a 50 cal MZ. :o
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline gunther66

  • GBO Supporter
  • Trade Count: (47)
  • Contributor
  • *****
  • Posts: 392
  • Gender: Male
Re: oops...
« Reply #8 on: November 17, 2011, 06:45:04 AM »
Maybe it was made on Friday....
Logged
"There is nothing better for the inside of a man than the outside of a horse"  Ronald Regan

NRA Life Member since '72

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: oops...
« Reply #9 on: November 17, 2011, 07:16:39 AM »
Lets see.....
Breech seat a bullet of proper dia. for the bore and follow it with the 'reusable sub caliber powder chamber (case)'.........
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Joe S.

  • Trade Count: (30)
  • A Real Regular
  • ****
  • Posts: 843
  • Gender: Male
  • The poisonous mushroom!
Re: oops...
« Reply #10 on: November 17, 2011, 07:23:51 AM »
I think it was made on friday. :)
Logged
Joe S.
Central MS

"An armed society is a polite society."

redistribute work ethic!

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: oops...
« Reply #11 on: November 17, 2011, 08:39:25 AM »
We used to joke in the shop about the inconsistency of Italian vehicles build quality by saying that you didnt want a Mon., Wed., or Fri. made one, or those made right after lunch anyday.
Mon. was getting over the weekend, Wed. was after two days work, and Fri. for the obvious. After lunch we will leave to the imagination.
Tues. and Thur. were gems if not made right after lunch or too close to closing.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: oops...
« Reply #12 on: November 17, 2011, 08:49:30 AM »
Saw a 270 bbl on a gun marked and chambered for a 3006 . Guy shot it .
Logged
If ya can see it ya can hit it !

Offline guzzijohn

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3037
Re: oops...
« Reply #13 on: November 17, 2011, 09:13:57 AM »
Quote from Gcrank1:
"We used to joke in the shop about the inconsistency of Italian vehicles build quality by saying that you didnt want a Mon., Wed., or Fri. made one, or those made right after lunch anyday.Mon. was getting over the weekend, Wed. was after two days work, and Fri. for the obvious. After lunch we will leave to the imagination.
Tues. and Thur. were gems if not made right after lunch or too close to closing."


As per my handle I own two Moto Guzzi motorcycles which are Italian made. Overall they are great bikes but the above has applied to the Guzzi factory at times, especially in the 80s and some of the 90s. That not only goes for the production line but engineering too.
GuzziJohn
Logged

Offline jimbobb55

  • GBO Supporter
  • Trade Count: (0)
  • Member
  • *****
  • Posts: 88
  • Gender: Male
Re: oops...
« Reply #14 on: November 18, 2011, 10:06:48 AM »
Are H&R barrels rifled with a button die? Chambered 444 how could they drag a 500 button die through it?
Logged

Offline Saloon slug

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
  • Eastern NC
Re: oops...
« Reply #15 on: November 18, 2011, 10:10:46 AM »
A 50/444 that could be fun.
Logged
From the halls of Montezuma

Offline Joe S.

  • Trade Count: (30)
  • A Real Regular
  • ****
  • Posts: 843
  • Gender: Male
  • The poisonous mushroom!
Re: oops...
« Reply #16 on: November 18, 2011, 10:28:51 AM »
I would figure they start like as a tube of a certain bore that is rifled then reamed depending on the caliber. Like same "blank" for 44 and 444 marlin? Someone just grabbed the 50 cal blank and reamed a 444 chamber into it... I guess?
Logged
Joe S.
Central MS

"An armed society is a polite society."

redistribute work ethic!

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: oops...
« Reply #17 on: November 18, 2011, 11:02:35 AM »
YOU JUST GOTTA SLUG BOTH ENDS OF THAT BORE FOR US!
Inquiring minds, and all that.........
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Joe S.

  • Trade Count: (30)
  • A Real Regular
  • ****
  • Posts: 843
  • Gender: Male
  • The poisonous mushroom!
Re: oops...
« Reply #18 on: November 18, 2011, 11:16:34 AM »
Don't know that I have a way to do that?
Logged
Joe S.
Central MS

"An armed society is a polite society."

redistribute work ethic!

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: oops...
« Reply #19 on: November 18, 2011, 11:29:52 AM »
Got any .50 cal muzzleloader roundballs?  If a bit too small just squish in a vise a bit to upsize and plastic or wood hammer in.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Joe S.

  • Trade Count: (30)
  • A Real Regular
  • ****
  • Posts: 843
  • Gender: Male
  • The poisonous mushroom!
Re: oops...
« Reply #20 on: November 18, 2011, 11:33:19 AM »
I gotya. If I can get to it before they send it back I will
Logged
Joe S.
Central MS

"An armed society is a polite society."

redistribute work ethic!

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: oops...
« Reply #21 on: November 18, 2011, 01:18:51 PM »
Quote from: Joe S. on November 18, 2011, 10:28:51 AM
I would figure they start like as a tube of a certain bore that is rifled then reamed depending on the caliber. Like same "blank" for 44 and 444 marlin? Someone just grabbed the 50 cal blank and reamed a 444 chamber into it... I guess?

Joe,
 
Ignoring the rim on a 444M brass the largest OD is around 0.470" so they couldn't cut a 444M chamber in .500" barrel blank.  Maybe the bore is opening up as you near the muzzle? 
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline Joe S.

  • Trade Count: (30)
  • A Real Regular
  • ****
  • Posts: 843
  • Gender: Male
  • The poisonous mushroom!
Re: oops...
« Reply #22 on: November 19, 2011, 01:39:11 AM »
Thanks BB
I actually stuck a 444 case down the muzzle. It went about half way a,d stopped. Maybe I didn't mic it properly
Logged
Joe S.
Central MS

"An armed society is a polite society."

redistribute work ethic!

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: oops...
« Reply #23 on: November 19, 2011, 04:18:40 AM »
Sounds like the bore is messed up near the muzzle, a 444 round should drop into the muzzle clear to the rim, maybe they ran the muzzle recessing tool a little too deep and left a poor crown.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: oops...
« Reply #24 on: November 19, 2011, 03:35:42 PM »
Quote from: quickdtoo on November 19, 2011, 04:18:40 AM
Sounds like the bore is messed up near the muzzle, a 444 round should drop into the muzzle clear to the rim, maybe they ran the muzzle recessing tool a little too deep and left a poor crown.

Tim


If that's the case then making it a shorty may fix it. ??


Thanks, Dinny
Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline Joe S.

  • Trade Count: (30)
  • A Real Regular
  • ****
  • Posts: 843
  • Gender: Male
  • The poisonous mushroom!
Re: oops...
« Reply #25 on: November 19, 2011, 03:48:36 PM »
Best I could offer is I dropped a 45cal lead muzzle loader ball down the bore and it slid right thru. 50 cal ball wouldn't fit
Logged
Joe S.
Central MS

"An armed society is a polite society."

redistribute work ethic!

Offline slngblde

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 180
  • 3 miles north of Joe s
Re: oops...
« Reply #26 on: November 19, 2011, 04:25:06 PM »
I had planned to swing by there today to see this, but my crs flared up and i forgot.
Logged

Offline Rodland

  • Trade Count: (12)
  • Avid Poster
  • **
  • Posts: 179
Re: oops...
« Reply #27 on: November 20, 2011, 04:05:13 AM »
Sounds like ya got one of those Johney Cash barrels. "It's a 44, 444, 45, 50, 500 Handi barrel shootin gun." ::)   
Logged
My remember'er is broke, but my forgetter is getting better.
Pages: [1]   Go Up
« previous next »