« previous next »
Pages: [1]   Go Down

Author Topic: 25-06 reloads????  (Read 542 times)

0 Members and 1 Guest are viewing this topic.

Offline khrhunter

  • Trade Count: (4)
  • Avid Poster
  • **
  • Posts: 116
  • Gender: Male
25-06 reloads????
« on: November 21, 2011, 07:31:02 AM »
what have you guys got the best results with? I usually shot remington core lokt and love em but prices are gettin crazy. Just ordered my dies so now I need to get the rest.
Logged
204 Ruger Ultra Fluted
204 RUGER HANDI
223BBL HANDI
223SS HANDI
25/06 HANDI
243 HANDI
20GA H&R
30/30-20 GA H&R COMBO,ALL MY KIDS GREW UP ON IT

Offline Wyo. Coyote Hunter

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1839
Re: 25-06 reloads????
« Reply #1 on: November 21, 2011, 09:05:11 AM »
 :)  There are loads I like better, but an accurate one has always been IMR 4350 and 100 grain Serria flat base....with my current rifle it will cut one hole at 100 yards....RE 22 is good, and IMR4831 excellent...depending on your use of the rifle, this is where I would start.....
Logged

Offline khrhunter

  • Trade Count: (4)
  • Avid Poster
  • **
  • Posts: 116
  • Gender: Male
Re: 25-06 reloads????
« Reply #2 on: November 21, 2011, 12:51:26 PM »
sounds like a great place to start... thanks alot
Logged
204 Ruger Ultra Fluted
204 RUGER HANDI
223BBL HANDI
223SS HANDI
25/06 HANDI
243 HANDI
20GA H&R
30/30-20 GA H&R COMBO,ALL MY KIDS GREW UP ON IT

Offline manatee1947

  • Trade Count: (13)
  • Contributor
  • ***
  • Posts: 481
  • Gender: Male
Re: 25-06 reloads????
« Reply #3 on: November 21, 2011, 02:45:52 PM »
IMR 4350 works well, the 100gr Nosler BT works well. If you are hunting for deer or better. If you are after varmints or predators you need to looks at the 75 gr V-max, and H414 and IMR 4064. You can get 3600 fps and not really shoot hot loads.
Logged
remember the starfish

Offline Deerhunter#1

  • GBO Supporter
  • Trade Count: (84)
  • Senior Member
  • *****
  • Posts: 1047
Re: 25-06 reloads????
« Reply #4 on: November 21, 2011, 03:41:24 PM »
I have gotten best results with h4350 and 120 grain bullets. not a barn burner but good shooter.
Logged

Offline garbhead

  • GBO Supporter
  • Trade Count: (114)
  • A Real Regular
  • *****
  • Posts: 960
  • Gender: Male
  • For every Goliath, there is a stone.
Re: 25-06 reloads????
« Reply #5 on: November 22, 2011, 11:58:15 PM »
here's one I ran onto...haven't tried it  but here it is.
Logged
12g shortie w/chokes,Tamer .410,12g "Buck" slug gun w/20g extra barrel, 12g smooth bore tracker I, 45/410 w/22vp matched set, 7mm-08, .308 20",

my avatar pic is my 1960 Rambler I bought in 1972 for $175..6 banger 3-on-the-tree...drove it for 5 yrs  22mpg.. was "hot-rodding" (LOL) one night...tore out 1st/reverse gear. Drove it that way for 2 yrs(with no reverse and only 2nd and high)  Had to really plan ahead when parking.
sold it for $125
Do not argue with an idiot. He will drag you down to his level and beat you with experience.--Mark Twain

Politicians should only be allowed one term in office, then one term in jail.

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: 25-06 reloads????
« Reply #6 on: November 23, 2011, 01:17:23 AM »
Nosler 100 gr BT , BR-2 primers and 53 gr IMR 4831 . At 100 yards I get one ragged hole about 1/2 inch or so. This load has worked in several other guns. I load so the bolt will just close as the bullet touches the rifling. I tried the same load with partitions and best group was inch and a half. I have tried several other bullets over the years but none as accurate as the listed load. I shoot ground hogs and deer with that load with good results.
Logged
If ya can see it ya can hit it !

Offline sabbatus

  • Trade Count: (6)
  • Member
  • *
  • Posts: 85
Re: 25-06 reloads????
« Reply #7 on: November 23, 2011, 06:24:58 PM »
i am shooting the recommended load from noslers book,   49.0 gn imr 4350 pushing either a 115 b.t. or the 115 partition.   m.o.a. groups all day,   this loads has had perfect success out to 340 yds (measured with rangefinder) on white tail.   complete penetration,   top of heart and lung jelly.    i prefer the partition for hunting, but both work fine i suppose.  the b.t. may gain the upper hand in the accuracy department when the distance gets long though
Logged

Offline keith44

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2748
  • Gender: Male
Re: 25-06 reloads????
« Reply #8 on: November 23, 2011, 09:29:32 PM »
been a long time since I shot any 25'06's, used to be my go to rifle though.  I got bored being tagged out on opening morning of deer season.  Biggest problem with a .25'06 I had was if I could see it, I could kill it.  I used to buy Remington core lokt bullets in bulk packs from midwayusa.com a near max load of 4831, or 4350 made 400 yard shots easy.  53 grains of 4350 made 3,250 fps, as did 55 grains of 4831, with the 100 grain bulk packed bullets.
Logged
keep em talkin' while I reload
Life member NRA

Offline kennyd

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 528
Re: 25-06 reloads????
« Reply #9 on: November 24, 2011, 02:35:56 PM »
Hornady 117 BT, 54.0 IMR 7828.  Also loaded some Barnes XLC's (you can't get them now since they will go thru a cops vest) on .270 brass.  Be aware that a .270 is longer, so needs to be trimmed.  They all shoot well enough for an old man.
Logged
just because you're paranoid doesn't mean they are not watching you
Pages: [1]   Go Up
« previous next »