Author Topic: 405 loads for 1895 Winchester (Read 918 times)

Michael Johnson · « **on:** January 15, 2004, 11:25:30 AM »

I just picked up some Hornady brass and some 300 grain Barnes XFB bullets. I am trying to devise a good Elk hunting load for my new 1895 Winchester. Does anyone out there have any suggestions. - Mike

Blackhawk44 · « **Reply #1 on:** January 15, 2004, 12:14:36 PM »

Handloader magazine had several articles in the last couple of years on that subject. riflemagazine.com click on handloader and check back issues.

Michael Johnson · « **Reply #2 on:** January 19, 2004, 02:20:55 PM »

I called Barnes, they recommended five different loads. One of them was IMR4895 up to a maximum of 53 grains. I loaded 51, 52, and 53 grains with CCIBR2 primers. Average velocity was 1954, 2068, and 2104 respectively. This was with a chrony 15 feet from the muzzle. Considering that I was using the barrel sights accuracy was not bad at 100 or 200 yards. I have on order a copy of the Lyman 38 receiver sight. The spitzer Barnes bullets feed okay out of the magazine. Should be just the ticket for bear or elk out to 200 yards. Thanks for the info. - Mike

Blackhawk44 · « **Reply #3 on:** January 20, 2004, 07:33:13 AM »

I went with Marble's tang for my '95 and changed the front to an XO(was AO) white stripped front ramped blade. Works great. 2 1/4" 3 shot groups at 200 with '06.

sdgunslinger · « **Reply #4 on:** January 24, 2004, 03:20:12 AM »

I hear that Hodgdon now has some .405 data on their website . You might want to check that out ..................