« previous next »
Pages: [1]   Go Down

Author Topic: What brand and style recoils pads does H&R use?  (Read 1513 times)

0 Members and 1 Guest are viewing this topic.

Offline STUMPJMPR

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1037
What brand and style recoils pads does H&R use?
« on: December 16, 2011, 02:36:39 AM »
I'm getting ready to install a couple of recoil pads on some shotgun stocks.  I wanted to use the same style recoil pads as on the Handi-Rifles.
Does anyone know what they are?
Logged

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: What brand and style recoils pads does H&R use?
« Reply #1 on: December 16, 2011, 03:13:09 AM »
The pad used by the factory works but isn't anything to write home about certainly nothing worth copying IMHO.

If its a "kicker" get a good pad like a  decelorator or kick eez or Limb saver.

If just a rifle style pad it's tough to beat a traditional Pachmayer.

The factory "pads" are punched out of a sheet of material specifically made for them. It's not really a pad at all but it works. 

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline STUMPJMPR

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1037
Re: What brand and style recoils pads does H&R use?
« Reply #2 on: December 16, 2011, 03:22:13 AM »
I will probably get a Pacmayer.  I have used limbsaver, but I have found if you leave the gun standing for a while, the pad melts to the floor.
Logged

Offline John R.

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 845
Re: What brand and style recoils pads does H&R use?
« Reply #3 on: December 16, 2011, 03:22:17 AM »
They appear to be made from recycled tires, and are just about as effective. ;D  I would put a Limbsaver on it, it makes a world of difference.
Logged

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: What brand and style recoils pads does H&R use?
« Reply #4 on: December 16, 2011, 04:17:45 AM »
Quote from: STUMPJMPR link=topic=247198.msg1099432128#msg1099432128 date
with Limbsaver, I have found if you leave the gun standing for a while, the pad melts to the floor.

Mine TOO!!!

They are very effective at taking the snap out of big kickers. But  because they sit allot more than they are shot the freaking pad oozes and breaks down. In one I put on my Marlin 1895 is about 3/8" squished at the comb!!! BUT Deceloraters that I have had longer are fine and do almost as good a job at recoil. Kick Eez are newer and cam up more with shotguners (Trap n Skeet folks)than hunters. But these also are excellent.

Frankly to my shoulder, many calibers need nothing but a bit of rubber and for these I like the traditional Pachmayer "rifle" pads.

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline STUMPJMPR

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1037
Re: What brand and style recoils pads does H&R use?
« Reply #5 on: December 16, 2011, 04:25:55 AM »
Quote from: cwlongshot on December 16, 2011, 04:17:45 AM
Quote from: STUMPJMPR link=topic=247198.msg1099432128#msg1099432128 date
with Limbsaver, I have found if you leave the gun standing for a while, the pad melts to the floor.

Mine TOO!!!

They are very effective at taking the snap out of big kickers. But  because they sit allot more than they are shot the freaking pad oozes and breaks down. In one I put on my Marlin 1895 is about 3/8" squished at the comb!!! BUT Deceloraters that I have had longer are fine and do almost as good a job at recoil. Kick Eez are newer and cam up more with shotguners (Trap n Skeet folks)than hunters. But these also are excellent.

Frankly to my shoulder, many calibers need nothing but a bit of rubber and for these I like the traditional Pachmayer "rifle" pads.

CW

 
I have found the stock reoil pads on Handi's more than adequate.  Even on the hard kickers.  They are a fairly soft pad that collapses well.  My intention was to install one on my  shotgun, since the plastic recoil pad doesn't cut it.  It leaves my shoulder stinging even from low brass.   
Logged

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: What brand and style recoils pads does H&R use?
« Reply #6 on: December 16, 2011, 06:34:02 AM »
Quote from: STUMPJMPR on December 16, 2011, 03:22:13 AM
I will probably get a Pacmayer.  I have used limbsaver, but I have found if you leave the gun standing for a while, the pad melts to the floor.
I had the same thing happen.  Thought it was just me.
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: What brand and style recoils pads does H&R use?
« Reply #7 on: December 16, 2011, 08:33:48 AM »
Late model Limbsavers don't melt like the originals, you can coat the older ones with Kick-Eez Slick-Eez pad treatment to prevent them from melting, ArmorAll will also help.

http://www.midsouthshooterssupply.com/item.asp?sku=00206101SE

Tim

There's a real simple solution for collapsed pads....

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline JB White

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 113
Re: What brand and style recoils pads does H&R use?
« Reply #8 on: December 16, 2011, 08:55:10 AM »
That's good to know. I plan to pass that info along to a friend who just put a Limbsaver on his son's shotgun this season. I'll suggest he store it muzzle down.
 
Logged

Offline rdlange

  • GBO Supporter
  • Trade Count: (52)
  • Senior Member
  • *****
  • Posts: 1122
  • Gender: Male
Re: What brand and style recoils pads does H&R use?
« Reply #9 on: December 16, 2011, 09:03:38 AM »
If Limbsaver was $10 I'd accept having to put a special treatment on it.  At the price they charge it should work properly, not melt.  I've always used Pachmayer so why change what works.
Logged
Think as if you LIFE depends on it... IT does..!  Be Well...

Offline BBF

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 10042
  • Gender: Male
  • I feel much better now knowing it will get worse.
Re: What brand and style recoils pads does H&R use?
« Reply #10 on: December 16, 2011, 10:39:12 AM »
Won't your rifles get dizzy standing on their head??
Logged
What is the point of Life if you can't have fun.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: What brand and style recoils pads does H&R use?
« Reply #11 on: December 16, 2011, 10:45:43 AM »
Nope, and oil doesn't run down the bore and into the action or on the stock either, works great on muzzleloaders too, no need to worry about oil accumulating in the breech for a potential contaminated load and misfire!  8)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: What brand and style recoils pads does H&R use?
« Reply #12 on: December 16, 2011, 05:52:18 PM »
I use a couple sizes of slip on Limbsavers.  Just keep em in the side pouch of my shooting bag and pull out the one that works.  LOP has never been really special for me, but I only owned one scoped firearm until recently.  lol  If I did the scope thing, it might be more important.  ;)
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: What brand and style recoils pads does H&R use?
« Reply #13 on: December 16, 2011, 11:33:08 PM »
Good to hear of the treatment for the pads!
 
 Yea mine live on there muzzles or horizontal too, for some years now for all the reasons Tim mentioned. BUT the damage is done to most of the Limb-Saver pads, and the fact remains it didn't happen to the Decelerators.
BTW, If you do the grind to fit, you dont have to freeze them or do anything fancy to grind them to fit either!!
 
CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline goofyoldfart

  • grumpy old fart as well as goofy old fart.
  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 333
  • Gender: Male
Re: What brand and style recoils pads does H&R use?
« Reply #14 on: December 17, 2011, 03:01:50 AM »
Quick: it's simply intolerable and insensitive to post a picture of that many handi's , when I only have one (30-30 synthetic) and am so broke on S.S. !!!!! ( :'( ) Now, I have to budget to either buy another Handi or to finish up fixing my BSA Martini Peabody in 45-70. you have just put me a SERIOUS quandary, thanks loads. ;) They sure are 'purdy.  God Bless to all.


                                      Goofy
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: What brand and style recoils pads does H&R use?
« Reply #15 on: December 17, 2011, 05:29:21 AM »
That's Ok Goofy, I just bought another one to make up for ya!!  ;D

Thanks,

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline John R.

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 845
Re: What brand and style recoils pads does H&R use?
« Reply #16 on: December 19, 2011, 06:23:55 AM »
Melting of the pad used to be a problem. The original one I had on my 500 did just that. When I called Limbsaver, they said they were aware of the problem and had it fixed. They sent me a new pad, and I haven't had any problems with it (2 years).
Logged

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: What brand and style recoils pads does H&R use?
« Reply #17 on: December 19, 2011, 06:52:15 AM »
Quote from: John R. on December 19, 2011, 06:23:55 AM
Melting of the pad used to be a problem. The original one I had on my 500 did just that. When I called Limbsaver, they said they were aware of the problem and had it fixed. They sent me a new pad, and I haven't had any problems with it (2 years).
Well than maybe I call too! I have three I know of, if I dig a bit I bet there is a couple more!!!

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline BKS

  • Trade Count: (12)
  • Contributor
  • ***
  • Posts: 292
Re: What brand and style recoils pads does H&R use?
« Reply #18 on: December 19, 2011, 05:38:19 PM »
I saw a "prefit" Limbsaver today at Sportsman's Warehouse. It said it fit SBII's monte carlo style.
Logged

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: What brand and style recoils pads does H&R use?
« Reply #19 on: December 20, 2011, 12:11:39 AM »
Quote from: BKS on December 19, 2011, 05:38:19 PM
I saw a "prefit" Limbsaver today at Sportsman's Warehouse. It said it fit SBII's monte carlo style.

Yes, they are OK, not great but about as good as factory pads... Here is a couple pics of them on two of my stocks.
 


 


 
CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline bowtech302

  • Trade Count: (1)
  • Member
  • *
  • Posts: 62
Re: What brand and style recoils pads does H&R use?
« Reply #20 on: December 20, 2011, 02:50:09 AM »
I bought a "prefit" limbsaver pad for my USH 12 gauge. Says clearly on the package that it was for the USH with laminate stock. It was not even close for either the standard or the thumbhole......
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: What brand and style recoils pads does H&R use?
« Reply #21 on: December 20, 2011, 05:24:39 AM »
Limbsaver has several pads that come close to fitting H&R wood stocks, the model for the SB2-988 USH is one of the prefits that works on some, the #10018 is made for the old style synthetic stock, and the #10011 will work on the new style checkered synthetic stock with modification, of course this info is all in the FAQs, has been for years, best advice is use the templates on Limbsaver's website to compare your stock to see what fits best, H&R wood stocks aren't identical, if you think they are, just try swapping recoil pads, each pad is individually fitted so they aren't the same!

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline STUMPJMPR

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1037
Re: What brand and style recoils pads does H&R use?
« Reply #22 on: December 20, 2011, 08:00:37 AM »
I ended up ording a Pachmayer for $18.00.  It is the F325 model.  It is similiar to the old style H&R recoil pads.  I will be installing it this weekend.  This is my second grind to fit recoil pad.  I am going to trim the stock by 1.15" and fit the pad.  I'm trying to keep the LOP the same.  I'm also hoping I can do this without refinishing the stock. 
Logged

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: What brand and style recoils pads does H&R use?
« Reply #23 on: December 20, 2011, 08:08:13 AM »
If your careful you should be able to fit the pad without refinishing the stock. I have done many myself.  Cover the stock with tape (removable) and use a fine toothed blade.

Final dressing g of the pad can be FI usher with tape on stock. The tiny thickness will not do anything.

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.
Pages: [1]   Go Up
« previous next »