« previous next »
Pages: [1]   Go Down

Author Topic: Barrel stamping question  (Read 652 times)

0 Members and 1 Guest are viewing this topic.

Offline cattleskinner

  • GBO Supporter
  • Trade Count: (9)
  • Contributor
  • *****
  • Posts: 448
  • Gender: Male
Barrel stamping question
« on: January 14, 2012, 08:40:29 AM »
I just got back my receiver where I had a 357 barrel added to my SB2 frame.  I noticed that it is stamped SB2 on the barrel and had a proof test mark added.  I was just wondering if the SB1 complete rifles are marked the same or is it something they add only to SB2 frames as accessory barrels.
Logged
"You can't miss fast enough to win a gunfight"

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: Barrel stamping question
« Reply #1 on: January 14, 2012, 08:49:17 AM »
I think they stamp SB2 on all rifle barrels, irregardless what frame they are fitted to. I do not have a SB1 frame to double check.

Good Luck and Good Shooting
Logged
Great men have vision and resolve to make dreams come true.

Offline TNBilly

  • GBO Supporter
  • Trade Count: (4)
  • Avid Poster
  • *****
  • Posts: 111
  • Gender: Male
Re: Barrel stamping question
« Reply #2 on: January 14, 2012, 09:26:22 AM »
Recent acquisitions of mine from the factory...... 410 barrel is stamped partner, 357 barrel stamped sb2
Logged
America is great because she is good, and if America ever ceases to be good, America will cease to be great.”        Alexis de Tocqueville

Offline ipyrek

  • GBO Supporter
  • Trade Count: (20)
  • Avid Poster
  • *****
  • Posts: 225
  • Gender: Male
Re: Barrel stamping question
« Reply #3 on: January 14, 2012, 10:54:37 AM »
I had my 357 barrel that is factory marked SB2 put on a SB1 frame. Didn't want anyone else to put the wrong barrel on the frame so i took the frame to a local jewelry store and had the SB1 engraved for $7.
Logged
28ga.mod.,20ga.mod.,20ga.full,20ga.USH, 20ga.PardnerPump,20ga.StoegerSxS,17hmr, 223Superlight, 357mag/Max,Marlin 336/30-30

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: Barrel stamping question
« Reply #4 on: January 14, 2012, 06:37:01 PM »
Quote from: ipyrek on January 14, 2012, 10:54:37 AM
I had my 357 barrel that is factory marked SB2 put on a SB1 frame. Didn't want anyone else to put the wrong barrel on the frame so i took the frame to a local jewelry store and had the SB1 engraved for $7.
That's a real good idea, too bad H&R won't consider doing this.
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline JB White

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 113
Re: Barrel stamping question
« Reply #5 on: January 14, 2012, 06:56:22 PM »
Not a bad idea at all. Especially when fitting a SB2 marked barrel to an SB1 frame. H&R should at least consider offering it as an option when fitting a new 357 or 44 barrel to a customers SB1 frame. If they took it upon themselves I can almost hear the howls from those who didn't want their receiver "marred" when sent in.
Logged
Pages: [1]   Go Up
« previous next »