Author Topic: 243 115gr DTAC  (Read 1061 times)

0 Members and 1 Guest are viewing this topic.

Offline albertaguide

  • Trade Count: (0)
  • Member
  • *
  • Posts: 26
243 115gr DTAC
« on: January 23, 2012, 02:43:29 PM »
i was on 6mmBR.com and saw a posting regarding a load firing a 115gr DTAC @ 3150fps, no mention of barrel length or load data. i was wondering how this is possible or if i'd be able to come close with my  factory vangaurd. the highest velocity i've found in a reloading manual is 3000fps with a 105 hornady Amax

Offline gary0529

  • Trade Count: (0)
  • Member
  • *
  • Posts: 85
Re: 243 115gr DTAC
« Reply #1 on: January 24, 2012, 02:59:21 AM »
Before you get into sheer speed, will a 1:10 twist barrel even stabilize a 115 DTAC.
I really doubt it.
I get marginal stability numbers when I calculate it using Brian Lizt's formula in a 10 twist.
Since I shoot 6mm BR I would likely bet that whoever posted there has a 1:8 or faster barrel.

Don't see how 3000 fps will do you any good if it ain't going straight.

However, saying that, remember that every barrel is different and I have no experience with Weatherby and the freebore it has.

Perhaps you can post the question on a Weatherby forum and get someone who has actually tried it.

Gary

Offline 243dave

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 517
Re: 243 115gr DTAC
« Reply #2 on: January 24, 2012, 08:38:00 PM »
Your vanguard won't stabilize the DTAC and even if it did you couldn't get that kind of velocity.  That bullet should be shot out of a 1-7.5 inch twist not a 1-10.  Those kind of velocties from a 243 is only achieved with a long barrel that is specially throated for the DTAC and loaded to a OAL of more than 2.8 inches.  You have to build a gun for that bullet.
Dave 

Offline albertaguide

  • Trade Count: (0)
  • Member
  • *
  • Posts: 26
Re: 243 115gr DTAC
« Reply #3 on: February 01, 2012, 12:45:35 PM »
i hadn't considered a specially chambered rifle. i assumed a longer barrel. my vangaurd shoots 105 Amax great @ 3025fps, but my question had more to do with curiousity. not a speed addict but love accuracy (was it Elmer Kieth who said "only accurate rifles are interesting"?) i used to use a 75gr hp at 3100 fps exclusivly. my 243 is only a varmit gun. but my fiancee and son will be using it and or my 6.5 swed for deer next season.

Offline 243dave

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 517
Re: 243 115gr DTAC
« Reply #4 on: February 01, 2012, 06:39:37 PM »
I think Townsend Whelen said "only accurate rifles are interesting".   Are you intending to use the A-max for deer??
They might work well, I don't have no first hand knowledge, but I'd bet there are better bullets for the deer. 
Dave

Offline albertaguide

  • Trade Count: (0)
  • Member
  • *
  • Posts: 26
Re: 243 115gr DTAC
« Reply #5 on: February 07, 2012, 03:07:18 PM »
No i use a 338win mag or 300 weatherby for deer, (Alberta muleys are huge!!! kidding but believe using "more than enough gun") i use the 243 for coyotes. typically 75gr HP but i get bored and either have to try new loads or trade the gun. i have used the Amax 105gr @ 2875fps for dogs with great success. if i hit em dead dog DRT!