Leupold Rifleman Scopes

[Forestclimber]

How good are Leupold Rifleman scopes compared to their higher price models?  I'm thinking about a shotgun scope.

[SHOOTALL]

They are VX1 scopes with a different finish. Have a 2X7 on a shotgun no complaints .

[rockbilly]

I have 10-12 of them on everything from a .5mm to a 338 mag, never a problem with any of them.

[quickdtoo]

How good are Leupold Rifleman scopes compared to their higher price models?  I'm thinking about a shotgun scope.

This should help.

Tim

http://www.leupold.com/corporate/resources/faqs/#WhatAreTheMajor3.

What are the major differences between scope lines?

With all of the recent changes, it can be difficult to know exactly how each product will perform. Every scope Leupold produces, including the Rifleman, is fully coated (all lenses, internal and external, are coated) and utilizes glass, coatings, and optical systems of equal or better quality than the discontinued Vari-X II’s of the past. Decreased cost associated with the Rifleman line is due to increased efficiency in our production process, not from reduced quality.

To make things easier, a brief summary of our current scope lines has been compiled including the most prominent features belonging to each.

It is important to note that every lens (internal and external) in every Leupold scope is coated, but the type of coatings will vary. “Fully multicoated” indicates that each lens in an optical system is coated with multiple layers of lens coating, such as Multicoat 4. “Fully coated” indicates that each lens is coated with a single lens coating; Leupold uses magnesium fluoride. “Standard multicoated” scopes have a combination of coated lenses and multicoated lenses.

VX-7
New for 2007, the VX-7 line takes full advantage of Leupold’s 100 years of experience. The VX-7 uses ¼-MOA SpeeDial adjustments which eliminate the possibility of losing adjustment covers. DiamondCoat 2 exterior lens coatings provide the highest level of scratch resistance ever offered. Xtended Twilight internal lens coatings work to optimize the wavelengths specific to twilight conditions, making the VX-7 the best low-light scope we’ve ever produced. The use of a 4-to-1 erector system provides a larger range of magnification, making this line the ultimate scope for serious hunters.

LPS
The LPS line uses ¼-MOA, low-profile, finger-adjustable adjustments; a fast-focus eyepiece; and our DiamondCoat lens coatings to provide incredible light transmission values with the addition of remarkable scratch resistance.

VX-L®
The VX-L was new for 2006, and uses ¼-MOA or 1/8-MOA adjustments depending upon model, has a fast-focus eyepiece, and utilizes an objective lens specially shaped to allow large objective scopes to be mounted in low rings. VX-L scopes use a combination of Index Matched and DiamondCoat lens coatings as well as edge-blackened lenses to produce extremely low glare and unprecedented light transmission values.

VX-III
The VX-III line was new for 2004, and uses ¼-MOA, low-profile, finger-adjustable adjustments and a fast-focus eyepiece. VX-III’s are fully multicoated and Index Matched to ensure that each lens has the best possible coating, producing total light transmission values higher than ever seen before.

Mark 4
Beginning in 2004, all tactical scopes are included in the Mark 4 category and will have the same features as past tactical models with the addition of a fast-focus eyepiece and Index Matched lenses; there are two exceptions which include the CQ/T and 3-9x40mm PR. The CQ/T has always utilized a combination of DiamondCoat (external) and Multicoat 4 (internal) lens coatings, and the 3-9x40mm PR is fully multicoated using Multicoat 4. 2003 tactical scopes typically had fully multicoated lenses utilizing Multicoat 4.

Vari-X III
The Vari-X III line (discontinued for 2004 with introduction of VX-III) has seen little change and is still optically the same as those produced in the 90s. Vari-X III’s utilize ¼-MOA click adjustments and are fully multicoated with Multicoat 4.

VX-II
The VX-II line (2003 and older) uses a combination of Vari-X III and Vari-X II (discontinued) technology. VX-II’s also utilize ¼-MOA click adjustments, but the lens coatings are unique. The external lenses are coated with Multicoat 4 and the internal lenses are coated with magnesium fluoride.
Beginning in 2004, the VX-II line is fully multicoated and will perform comparably to the discontinued Vari-X III line.

VX-I
The VX-I also utilizes a combination of Vari-X III and Vari-X II technology, utilizing ¼-MOA friction (non-clicking) adjustments. The external lenses are multicoated and the internal lenses use magnesium fluoride.

Rifleman
Though the Rifleman line of scopes uses a different maintube (for aesthetic reasons), it is optically the same as the Vari-X II (discontinued for 2001). The adjustments are exactly the same as the Vari-X II (½-MOA friction) as are the lenses and coatings. All lenses, internal and external, are coated with magnesium fluoride. Basically, the Rifleman is a newer-looking matte finish version of the Vari-X II that helped build the Leupold reputation. It is important to note that Custom Shop options (reticle changes, target adjustment installation, etc.) are not available for the Rifleman line of scopes.

Beginning in 2005, there were changes to the fixed magnification scope lines, updating them to follow the current convention used by the VX series of scopes; all fixed magnification scopes now have an “FX” designation followed by a number indicating the combination of technologies used in that product. For example, an FX-II will have the same lens coatings and adjustments as a VX-II, an FX-III will have the same lens coatings and adjustments as the VX-III line, etc.

There was also a shift from using the term “compact" to the term “ultralight,” meaning that the FX-II 2.5x20mm Ultralight which was introduced in 2005 will be a fixed magnification scope with ¼-MOA click adjustments, fully multicoated lenses, and will have the compact eyepiece.

[Lloyd Smale]

looks like the vx1 has multicoated external lenses and the rifleman doesnt. Ive got a couple vx1s and dont really care for them due to the friction ajustments. But ill say my eyes about see what leupold advertises as i think the vx1s i have are slightly better in low light then my old vari x IIs were. Not near what the vx2s have though.

[Swampman]

I've owned several Rifleman scopes and found them to be serviceable.

[Zachary]

If you can afford to spend a little extra money, then I would recommend that you get Leupold's higher priced scopes because, as the saying goes, "you get what you pay for," and this holds true for optics.  I'm not suggesting that you spend an arm and a leg to get Leupold's (or any other manufacturer's) $1,000+ scope.  All I am recommending is that, if you can, spend a little extra money on a higher model scope.
 

[Swampman]

For a little more money you can get a Zeiss Conquest.

[Cheesehead]

I have a 3x9  Rifleman on my AR15 6.8mm. The optics are high quality. I am with Lloyd on the friction adjustment, but I only paid 200 bucks for it, new. It is a very good value and  rugged enough for several deer seasons, so far.

Cheese

[bcraig]

I use a 2-7x Rifleman on a Ruger 10-22 and is as Bright and clear as anybody could ask for. From so early I can barely see a squirrel to so late I can barely see a squirrel with my bare eyes but see them just fine through it..
Yea the fully multi coated everything might be technically better BUT when this is good enough why spend more?\
Craig

[Empty Quiver]

If you are happy with an older Vari X-II you ought to be just as happy with a new Rifleman. Same contents different packaging. Leupold seems to make a habit of dropping a current model down a notch as it upgrades the line, your new VX-II is the old VX-III, new VX-I the old VX-II. The new VX-3  is not the old anything though the 3 being the beginning of a new series, sorta like the VX being all new when compared to the old Vari-X series.