Author Topic: Burris fastfire on a AR?  (Read 1189 times)

0 Members and 1 Guest are viewing this topic.

Offline tzimm007

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 110
  • Gender: Male
Burris fastfire on a AR?
« on: February 08, 2012, 07:30:12 PM »
Anyone shooting the Fastfire on there AR? Most everything I read about them sound good most everyone likes them. I would like to use it for the primary sight. From what I've read I think you should be able to shoot it accurately out to 150 yards. Dose that sound reasonable? Do you have to have the AR rail or will the standard picatinny rail work? As far as the hight is concerned?
Thanks TJ

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18250
Re: Burris fastfire on a AR?
« Reply #1 on: February 09, 2012, 12:26:10 AM »
there a decent sight but if it were my 300 bucks id save a while longer and buy a comp 2 aimpoint. Or even consider a used one. Battery life is so good on the aimpoint they can be left on all the time. they claim a battery life on a comp 2 is a year left on. Ive got two that have been on for almost 3 years now on the same battery. Nice thing about that is if you have to grab a gun in the middle of the night your not having to fumble with switches or with sight hoods. But that been said if your gun is just a gun your going to take to the range and plink with and you are going to remember to turn it off when your done everytime there a pretty good little sight. IF you want it to cowitness with your open sights on an ar you need the riser. Even if you dont have open sights to cowithness with your going to want the riser to put the sight at the right height for a more natural feel. they have to be a rugged little sight. I know one guy that has one mounted on a 12 guage 3 1/2 pump that he does all his goose hunting with and that gun has probably got thousands of rounds through it and he loves it. Nothings as rugged as an aimpoint though. I once saw a video on you tube where two guys from aimpoint took a couple ars out to a parking lot. they set up targets at 50 yards. Shot there ars. Took off the aimpoits, skipped them 30 feet accross a parking lot picked them up skipped them back again and mounted them on there guns and both held perfect zero. try that with any other optic made!
blue lives matter

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18250
Re: Burris fastfire on a AR?
« Reply #2 on: February 09, 2012, 12:30:05 AM »
by the way another decent choise is the vortex strikefire reddot. Its kind of an aimpoint clone. Ive got two of them and they seem to be well made. they dont have the battery life an aimpoint has but other then that there far above what most aimpoint clones are in quality. Battery life on one is still good enough that they can be kept on if you have the presents of mind to change batterys every 3 or 4 months. Ive heard of guys using them on guns as big as the 375 h&h so they have to be rugged. there even cheaper then the burris. You can get them shipped to your door from cammeraland a sponsor here for about a 150 bucks and they come with a proper height ar mount. If size matters they also have a micro unit for around 200.
blue lives matter

Offline tzimm007

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 110
  • Gender: Male
Re: Burris fastfire on a AR?
« Reply #3 on: February 09, 2012, 04:12:21 AM »
Thanks for the info Lloyd I'll check them out. I think the aim point is a little out of my price range at the moment!! Still trying to pay for my rifle!!

Offline spence44

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
Re: Burris fastfire on a AR?
« Reply #4 on: March 05, 2012, 01:58:12 PM »
I've used the fastfire on a friend's remington 30ar several times. It's mounted on a 45 as a backup sight. We've shot lots of rocks (deer vital size) at 200 yards. I was impressed with the sight. Hope this helps.
Spence