« previous next »
Pages: [1]   Go Down

Author Topic: light firing pin strikes marlin 783 bolt action 22mag  (Read 903 times)

0 Members and 1 Guest are viewing this topic.

Offline Bull Nutria

  • Trade Count: (0)
  • Member
  • *
  • Posts: 54
  • Gender: Male
light firing pin strikes marlin 783 bolt action 22mag
« on: February 10, 2012, 07:35:04 AM »
 this rifle will shoot CCI and Rem ammo, but intermittently fires Win 22 mag ammo. I tried 2 win shells 3 times each and they would not go off. I tried these same shells  in a Ruger 7722 and shot perfectly. JP springs sells a spring kit for a marlin 900. would the 900 springs fit the 783? I suspect the striker spring is the culprit??
 
How difficult is it to disassemble the bolt on a 783?
 
any help will be appreciated.
 
Bull
Logged

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: light firing pin strikes marlin 783 bolt action 22mag
« Reply #1 on: February 10, 2012, 11:55:31 AM »
Best I can do is point you to the owners manual.  It's a slow connection but it does come up after a bit.  ;)  If it were me, I'd soak the bolt in cleaner for a bit and I'd bet you carbon flakes or dirt will come out of it.  Good cleaning often helps with the light strikes.  ;)
 
http://stevespages.com/pdf/marlin_780.pdf
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline oneoldsap

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 220
Re: light firing pin strikes marlin 783 bolt action 22mag
« Reply #2 on: February 11, 2012, 12:41:59 PM »
                  Check the rim thickness of the Win. ammo , it could be all or part of the problem if it's thinner than standard . Those bolts are a piece of cake to work on , you can get a new spring from GunPartsCorp .
Logged
Pages: [1]   Go Up
« previous next »