« previous next »
Pages: [1]   Go Down

Author Topic: Powder ?  (Read 699 times)

0 Members and 1 Guest are viewing this topic.

Offline bolewine

  • Trade Count: (2)
  • Member
  • *
  • Posts: 86
  • Gender: Male
  • BUT I ONLY NEED ONE SHOT!!
Powder ?
« on: February 15, 2012, 07:33:19 AM »
Hi Folks,
What powder choice is everyone using for 9mm 147gr copper pleated ? ,and why?
Logged
EATING WILD GAME FROM AROUND THE WORLD-AND PISSING P.E.T.A. OFF!

Offline wncchester

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3856
  • Gender: Male
Re: Powder ?
« Reply #1 on: February 15, 2012, 10:04:06 AM »
I dunno what every one is using but I'd suggest you get a loading manual and choose the powder they suggest as giving the highest velocity with the bullet weight you plan to use; use that powder as a starting point.
Logged
Common sense is an uncommon virtue

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Powder ?
« Reply #2 on: February 15, 2012, 11:45:27 AM »
I use Unique in my .38's with the plated bullets.  I use Unique in my .45's with plated bullet.  I use Unique in my .45 Colt with plated bullets.   Pattern here?  I load all pistol loads with Unique for target, plinking and basic defense.  I use H110 when I need real barn burners for Heavy defensive situations or bad animal stoppers.
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline kynardsj

  • GBO Supporter
  • Trade Count: (54)
  • Senior Member
  • *****
  • Posts: 1680
  • Gender: Male
  • Sweet Home Alabama
Re: Powder ?
« Reply #3 on: February 15, 2012, 12:09:13 PM »
I'm on the Unique wagon too. All my loads except for the hot 45 LC's get Unique. I'm a Lil Gun guy for the hot stuff. Unique will probably work fine in a 9mm.
Logged
When you were born, you cried and the world rejoiced. Live your life so that when you die the world cries and you rejoice.

Offline huntducks

  • Trade Count: (4)
  • Contributor
  • ***
  • Posts: 337
  • Gender: Male
Re: Powder ?
« Reply #4 on: February 15, 2012, 12:32:35 PM »
4756 here, Why because I have about 6lbs of the stuff and at 3grs i'll get lots of plinking rds.
Logged
Remember it's where the first bullet goes out of a cold barrel that counts most.

Offline MZ5

  • Trade Count: (14)
  • Contributor
  • ***
  • Posts: 415
  • Gender: Male
Re: Powder ?
« Reply #5 on: February 15, 2012, 03:24:56 PM »
Unique if/when I handload for my 9mm and/or 45 auto (plated bullets).  I use it in the 10mm, too, for cast or plated plinkers.
Logged

Offline cybin

  • Trade Count: (25)
  • Contributor
  • ***
  • Posts: 399
Re: Powder ?
« Reply #6 on: February 15, 2012, 04:47:48 PM »
I use accurate #2 or bullseye for 9mm. Mostly accurate though--I picked up 2lbs over a decade ago and haven't used it much--just started reloading for 9mm about a year or so ago. Want to use up the accurate powder. Seems to work well--and I may even buy some more when what I have is used up.
 
cybin
Logged

Offline dovehunter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 60
Re: Powder ?
« Reply #7 on: February 18, 2012, 06:05:32 AM »
We (my son and I) have been having good results using 4.2 gr. of W-231 with Berry's 124 gr. RN plated bullets.  At my club range this combo works well in his Glock 19 (gen. 3) and my P-38.  Incidentally, 5 gr. of this same powder works great in my son's FNP-40 (with Berry's 180 gr. RNFP plated bullets) and in my M1911 clone (with Berry's 230 gr. RN plated bullets).  We had started out using Unique in all the guns mentioned and it worked okay.  However, a couple guys at the club suggested trying W-231.  I got a can and tried it.  It's cleaning burning than Unique & meters the most consistently through my powder measure of anything I've used.  The accuracy has been as good or better too.  From here on out I'm going to save my Unique for shotshells.
Logged

Offline 223fan

  • Trade Count: (26)
  • Avid Poster
  • **
  • Posts: 247
  • Gender: Male
Re: Powder ?
« Reply #8 on: February 18, 2012, 03:28:57 PM »
When I loaded 9mm I used unique because thats what I had on hand.I thought it worked very well.
Logged
XLI the one to go with.

Online Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18190
Re: Powder ?
« Reply #9 on: February 19, 2012, 02:09:20 AM »
aa2 and 231 are my most used 9mm powders
 
Logged
blue lives matter

Offline mauser98us

  • GBO Supporter
  • Trade Count: (40)
  • Senior Member
  • *****
  • Posts: 1565
  • Gender: Male
  • 10 mm junkie and Whelan wacko
Re: Powder ?
« Reply #10 on: February 19, 2012, 04:02:57 PM »
231/HP-38 nuff said.
Logged
Pages: [1]   Go Up
« previous next »