Author Topic: ruger p-95 DC  (Read 663 times)

0 Members and 1 Guest are viewing this topic.

Offline buffermop

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 946
ruger p-95 DC
« on: February 21, 2012, 12:03:46 PM »
Just picked up a used 9mm Ruger P95 DC. My question is where is the safety button on this firearm or does the hammer down comply as a safety factor?

Offline 03A2

  • Trade Count: (1)
  • Member
  • *
  • Posts: 62
Re: ruger p-95 DC
« Reply #1 on: February 23, 2012, 05:31:57 AM »
If it is the de-cocker only model, after you press the decocking lever down to safely drop the hammer, you let go of the lever and it automatically springs back to its horizontal position.
The decocker safety model has a detent in the lower position, so once you drop the hammer, the lever stays in the lower position and the pistol is on safe.  If you want to fire the pistol you must push the lever back up with your thumb.
A co-worker has the de-cocker safety model and If i was to own one I would prefer the decocker only, I feel that the long double action trigger pull is enough to satisfy my safety requirements, just like a DA revolver.  I don't like the push up action to take off a safety, which differs from most of my push down to deactivate pistols, and I would worry about forgetting to push it back up after decocking if I was carrying it.
Of course, you can and should download the owners manual from rugers website, this will be the definitive info.