Author Topic: .357 mag Handi loads  (Read 1052 times)

0 Members and 1 Guest are viewing this topic.

Offline kmittleman

  • Trade Count: (0)
  • Member
  • *
  • Posts: 93
.357 mag Handi loads
« on: March 08, 2012, 03:59:37 AM »
Hi Guys,
 
I'm loading my .357 Handi up for deer and was looking for a decent load for it. The one I currently am working with is a 158gr Speer SP over 2400. I haven't Chronied it yet but it should give me around 1800fps. Is this a good combo for deer or should I try something like an XTP? I have some of those but hear that they top out at around 1500fps.
 
-Kevin
"The greatest trick the devil ever pulled was convincing the world he doesn't exist." - C.S. Lewis

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26944
  • Gender: Male
Re: .357 mag Handi loads
« Reply #1 on: March 08, 2012, 10:51:46 AM »
Should do fine. Jerry Lester used to be our resident .357 Magnum deer hunting expert. He used it extensively in both rifles and handguns for his deer hunting. His load was the Remington 158 JSP over a max charge of Lil' Gun.

Jerry lost his job and his internet connection and hasn't posted here in a long time. He is missed. I hope he is doing well these days.


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline Squib

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1592
  • Gender: Male
  • G- S- T- and I ain't got time to bleed!
Re: .357 mag Handi loads
« Reply #2 on: June 22, 2012, 04:56:49 PM »
tops out for structural stability meaning they're ready to blow apart upon contact with ANYTHING above that speed maybe... they go faster safely though.  Shooting max loads of H-110 w/ 125 XTP out of a 4'' revolver I was getting rediculous splash effects versus the same loads with berry's plated of the same weight.  I never did find anything more than fragments off the xtp's because they literally blew up on 2-liters filled with soapy water... the others just busted them open real good and got deformed. 

might be what you need, but then again shooting out of 16' plus of barrel I don't know that a round-nose wouldn't blow apart too.  I do know that using 158gr XTP's with H-110 got me MUCH better accuracy and less recoil and blast.  I assume that the heavier bullets in the short barrel slowed down the load enough that it didn't top that 1500ish limit and kept the jackets intact.... once again I don't know if that would be enough to help on a rifle though. 

the only thing I know for sure is that hornady xtp's WILL open up and violently dump energy into a target, judging by MY EXPERIENCE ONLY it's gonna dump it on the skin if hot-rodded, not in the innards. 

Offline buck460XVR

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 977
Re: .357 mag Handi loads
« Reply #3 on: June 23, 2012, 05:11:25 AM »
The Speer 158gr JSP is a good bullet to use for deer sized game @ those velocities. The 158gr XTP-HPs are not. I do tho, prefer the 158gr XTP-FPs over the Speers in my lever carbines. Big difference in penetration between the two XTPs, but accuracy is very similar when loaded the same.  Since the FPs can be a little hard to find sometimes,  I save them for hunting and practice with the HPs. The 158 Remmie JSPs work well also.
"where'd you get the gun....son?"

Offline GH1

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 939
  • Gender: Male
Re: .357 mag Handi loads
« Reply #4 on: July 23, 2012, 11:16:09 PM »
According to Hornady, the XTP-HP is useful between 800 and 1400 FPS, while the XTP-FP is good from 1200-1800 FPS.
GH1 :)
I owe my life to an organ donor

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: .357 mag Handi loads
« Reply #5 on: July 30, 2012, 10:41:02 AM »
This is what the chart I have from Hornady says.  I personally have 180's loaded with a minimum load of H110:
 

Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.


Offline Ranger99

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 9581
Re: .357 mag Handi loads
« Reply #6 on: September 02, 2012, 04:15:22 PM »
been working with 158gr. jsp sierra's
and 2400
worked great so far.
good solid boiler room hit in the left
side "armpit", totaled heart/lungs.
good quick humane shot.
roughly 90 yrds.
speer shouldn't be much different
good luck
18 MINUTES.  . . . . . .