« previous next »
Pages: [1]   Go Down

Author Topic: Dangit, I got a dilemma  (Read 870 times)

0 Members and 2 Guests are viewing this topic.

Offline txpitdog

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
Dangit, I got a dilemma
« on: March 14, 2012, 03:42:15 PM »
Not exactly sure what to do here. I have had this really neat project in mind for the past few months and have been trawling (not trolling)  the forums and classifieds for a cheapo H&R 45-70 to chop on.  Basically I want to chop the barrel down, switch to synthetic stocks, and add Firesights for a truly down and dirty truck and pig gun that I don't mind getting dinged and scratched.

Well, I've been looking and looking and finally found one. Got the seller down to $175,which I figure will still keep my project under 300 after gunsmith fees for chopping, recrowning, and remounting the front sight base.  From the one crappy pic the seller had I thought It was a regular Handi.   Well, I go to pick it up today, and the damn thing looks like this:

 

Never seen a stock like this, 'specially one that's not a Monte Carlo style.   Not a ding or a scratch on it, and well, I think it's kinda purdy.  So here's my dilemma, I overshot my goal.   I'm not sure I want to chop on this one, but seeing as how it'll never take the place of my beloved 1895GS, it ain't much good to me as is.

I suppose I could possibly make half my money back selling the stock and proceed with the project, but what do yall think?   Is this a unique one that I should leave as is, or should I charge forward with the swine slaughterer?  This would be a lot easier if it were the plain one I thought I was getting. 

Sent from my DROIDX using Tapatalk
Logged

Offline cab32

  • Trade Count: (6)
  • Member
  • *
  • Posts: 43
  • Gender: Male
Re: Dangit, I got a dilemma
« Reply #1 on: March 14, 2012, 03:46:23 PM »
Sell the stock or if you like it put it on one of your other rifles and sell that stock. CAB
Logged

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: Dangit, I got a dilemma
« Reply #2 on: March 14, 2012, 03:47:02 PM »
It's perfect as is.....
Logged
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: Dangit, I got a dilemma
« Reply #3 on: March 14, 2012, 04:00:46 PM »
It's already ugly so it'd make a good truck gun ;D   Little more weight than a syn so better for that cal. and the straight stocks are fast and Handi. Cut the barrel and you might like it better if you don't mind scratching that pretty wood up ;)


Oh, if you're talkin them H&R plastic colored sites, they'll prolly break the first time you pull it out of the truck :(   Maybe a nice peep :)
Logged

Offline Monteria

  • GBO Supporter
  • Trade Count: (8)
  • Avid Poster
  • *****
  • Posts: 114
Re: Dangit, I got a dilemma
« Reply #4 on: March 14, 2012, 04:09:38 PM »
Txpitdog=TBH'er?
Logged

Offline cab32

  • Trade Count: (6)
  • Member
  • *
  • Posts: 43
  • Gender: Male
Re: Dangit, I got a dilemma
« Reply #5 on: March 14, 2012, 04:12:20 PM »
I have a 500 S&W handi that has those sights. They appear to be what the manufacturer calls remington shotgun sights. Nice quick sight picture They are a polymer construction but seem tough.  Have not used them enough to know how they will stand up to the woods. CAB
Logged

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: Dangit, I got a dilemma
« Reply #6 on: March 14, 2012, 04:13:27 PM »
What kind of phone is that?


The ones that came on my 500 are gone. But someone treated them pretty rough when I wasn't looking >:(  So they may hold up under regular use :-\  I didn't get the chance ::)
Logged

Offline RPRNY

  • Trade Count: (11)
  • A Real Regular
  • ****
  • Posts: 552
Re: Dangit, I got a dilemma
« Reply #7 on: March 14, 2012, 04:24:35 PM »
Not DILEMA, OPPORTUNITY.  ;) Continue with your down and dirty 45-70 and acquire an SB2 and 26" 20 ga MOD barrel (open it up to IC); you can get them for under $100. Replace whatever it is furnished in with that stock you will have a very nice Grouse and Woodcock gun. Or, if no interest in a Grouse gun, that stock would look terrific on an iron sights 30-30. OPPORTUNITY!
Logged
[spoof]The Handi-Rifle is a highly matrixed, vintage tactical shooting platform allowing operators high interchangeability, extended caliber diversity, and a wide choice of range related optical solutions suited to the demands of their tactical operating environments.  ;) [/spoof]

Offline txpitdog

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
Re: Dangit, I got a dilemma
« Reply #8 on: March 14, 2012, 04:39:38 PM »
Monteria, yessir.  You must be a green screaner yerself.   2cool-er too?

I think if I chop her down, I'll end up in the 5.75lb range, and all I'll shoot through it is mild handloads with a hardcast at whatever velocity gets the sights to zero @50yds.

Sent from my DROIDX using Tapatalk
Logged

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: Dangit, I got a dilemma
« Reply #9 on: March 14, 2012, 05:08:52 PM »
Please whatever you do, don't mess with the furniture.  I think they're really great.  If it's really bothering you, I have the solution.
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline kennyd

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 528
Re: Dangit, I got a dilemma
« Reply #10 on: March 14, 2012, 05:14:52 PM »
I would sure keep that stock as is.  Find a Pallet set on the classified or (best way to spend $) buy another donor gun for the project.
Logged
just because you're paranoid doesn't mean they are not watching you

Offline rdlange

  • GBO Supporter
  • Trade Count: (52)
  • Senior Member
  • *****
  • Posts: 1122
  • Gender: Male
Re: Dangit, I got a dilemma
« Reply #11 on: March 14, 2012, 06:43:13 PM »
Barrel doesn't look 22"... Already 18?  Pretty short for a 45-70.  Pallet wood might be lighter.  Plastic definitely.  Trade or sell stock and get another for less $$.  JMHO...
Logged
Think as if you LIFE depends on it... IT does..!  Be Well...

Offline Monteria

  • GBO Supporter
  • Trade Count: (8)
  • Avid Poster
  • *****
  • Posts: 114
Re: Dangit, I got a dilemma
« Reply #12 on: March 15, 2012, 09:58:11 AM »
Bones on TBH. Let me know when you are ready for the chop and I'll send you an 11* crown cutter w/ .458 pilot.
Logged

Offline gstewart44

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1645
  • Gender: Male
Re: Dangit, I got a dilemma
« Reply #13 on: March 15, 2012, 10:40:24 AM »
Quote from: txpitdog on March 14, 2012, 03:42:15 PM

 I suppose I could possibly make half my money back selling the stock and proceed with the project, but what do yall think?   IsSent from my DROIDX using Tapatalk
Dang boys - I'm surprised no one has posted an "I'll take it" yet to be first in line on that purty piece of furniture.... ;D ;D
you always see certain items going in minutes or sometimes seconds,  but this kinda would make it a minus figure in terms of the classifieds... ;)
Logged
I'm just tryin' to keep everything in balance, Woodrow. You do more work than you got to, so it's my obligation to do less. (Gus McCrae)

Offline txpitdog

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
Re: Re: Dangit, I got a dilemma
« Reply #14 on: March 15, 2012, 02:53:35 PM »
Quote from: Monteria on March 15, 2012, 09:58:11 AM
Bones on TBH. Let me know when you are ready for the chop and I'll send you an 11* crown cutter w/ .458 pilot.

Thanks for the offer!  Soooo...do I just get after it with the hacksaw and dremel, then recrown?  No lathe, no skills, but I've got plenty of "what could possibly go wrong?" ;D

Sent from my DROIDX using Tapatalk
Logged

Offline dpe.ahoy

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 3363
  • Gender: Male
Re: Dangit, I got a dilemma
« Reply #15 on: March 15, 2012, 03:27:41 PM »
I've got a stock set like that on one of my Maxies.  Came off a shotgun, I like the looks of em.  If ya don't like the straight stock, sell it and put the $ on your project.  DP
Logged
RIP Oct 27, 2017

Handi's:22Shot, 22LR, 2-22Mag, 22Hornet, 5-223, 2-357Max, 44 mag, 2-45LC, 7-30 Waters, 7mm-08, 280, 25-06, 30-30, 30-30AI, 444Marlin, 45-70, AND 2-38-55s, 158 Topper 22 Hornet/20ga. combo;  Levers-Marlins:Two 357's, 44 mag, 4-30-30s, RC-Glenfields 36G-30A & XLR, 3-35 Rem, M-375, 2-444P's, 444SS, 308 MX, 338Marlin MXLR, 38-55 CB, 45-70 GS, XS7 22-250 and 7mm08;  BLR's:7mm08, 358Win;  Rossi: 3-357mag, 44mag, 2-454 Casull; Winchesters: 7-30 Waters, 45Colt Trapper; Bolt actions, too many;  22's, way too many.  Who says it's an addiction?

Offline Monteria

  • GBO Supporter
  • Trade Count: (8)
  • Avid Poster
  • *****
  • Posts: 114
Re: Re: Dangit, I got a dilemma
« Reply #16 on: March 16, 2012, 05:56:59 AM »
Quote from: txpitdog on March 15, 2012, 02:53:35 PM
Quote from: Monteria on March 15, 2012, 09:58:11 AM
Bones on TBH. Let me know when you are ready for the chop and I'll send you an 11* crown cutter w/ .458 pilot.

Thanks for the offer!  Soooo...do I just get after it with the hacksaw and dremel, then recrown?  No lathe, no skills, but I've got plenty of "what could possibly go wrong?" ;D

Sent from my DROIDX using Tapatalk

Close... I do it carefully, but the premis is the same. No lathe needed, it is a hand cutter. I have done 5bbls with it, and though it might not be as pretty as a lathe job (not as smooth), they all shoot great.
Logged
Pages: [1]   Go Up
« previous next »