Author Topic: Whats favorite load for 7mm-08 handi's?  (Read 607 times)

0 Members and 1 Guest are viewing this topic.

Offline Jim Flinchbaugh

  • Trade Count: (0)
  • Member
  • *
  • Posts: 95
  • Gender: Male
    • Photo Galleries
Whats favorite load for 7mm-08 handi's?
« on: March 14, 2012, 05:17:18 PM »
I picked up my new Handi today, brass should be here tomorrow
So what is you folks' favorite loads?
I have Reloader 15 on the shelf and some 140grain Ballistic tips.
I got lots of manuals, thought some one has had to have been here before me ;D

Offline cjrjck

  • Trade Count: (70)
  • Contributor
  • ***
  • Posts: 470
  • Gender: Male
Re: Whats favorite load for 7mm-08 handi's?
« Reply #1 on: March 14, 2012, 05:44:34 PM »
120 grain Barnes TSX or TTSX or the 140 grain Nolser Partition with 42 to 43 grains of IMR 4064. Work up slowly. The 120s will push over 3000 fps and the 140 about 2850.

Offline thejanitor

  • GBO Supporter
  • Trade Count: (59)
  • Senior Member
  • *****
  • Posts: 1094
  • Gender: Male
Re: Whats favorite load for 7mm-08 handi's?
« Reply #2 on: March 14, 2012, 05:58:14 PM »
Found all 3 of our 7-08 Handis love the lowest book load of H4350 with 120 gr bullets. Tried lots of powders for several years and after 44man suggested it I tried the H4350 and got them to shoot sub 1 inch groups at 100 yds and for years the best I could do was about 2 inches with some other powders. But I had to look in 6 places to find a recipe as low as he posted... once I found documentation I tried it and am very happy with the results. So if you don't like how the RL powder shoots keep trying other powders. Good luck they are a very nice caliber (my favorite)  thejanitor

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: Whats favorite load for 7mm-08 handi's?
« Reply #3 on: March 14, 2012, 09:53:38 PM »
I agree with the janitor.  Our sevens shoot best with light loads and bullets.  I was looking for a light plinking load for Patty and found this.  It's very comfortable to shoot and super accurate:  115 gr. Speer HP, 43.0 gr. Varget for 3000 fps.  We don't use this load for deer.  Just target, plinking and varmints. 

Pete
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline jpshaw

  • GBO Supporter
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1063
  • Gender: Male
Re: Whats favorite load for 7mm-08 handi's?
« Reply #4 on: March 15, 2012, 01:57:45 AM »
Hate to admit it but my 7 - 08 is a Remington 700 Mountain Rifle and I don't reload for it.  I've settled on the straight Remington 140 gr boat tails.  Yeah I own a bolt gun.  Two actually.

Offline Jim Flinchbaugh

  • Trade Count: (0)
  • Member
  • *
  • Posts: 95
  • Gender: Male
    • Photo Galleries
Re: Whats favorite load for 7mm-08 handi's?
« Reply #5 on: March 15, 2012, 05:15:08 AM »
Thanks guys,
I too have had great luck with 4350 in 280 rem & 308. but as you say, lower velocity loads.
 A while back I tried some Accubonds in my 280, with H4895sc, I got 5/8" group at 300 yards!
Trouble was, after I pushed the velocity up to get expansion at that range, I couldn't get it accurate again.


Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Whats favorite load for 7mm-08 handi's?
« Reply #6 on: March 15, 2012, 05:54:24 AM »
I've only shot two loads in my 7mm-08 Lite, both shoot excellent.

Tim

"Always do right, this will gratify some and astonish the rest" -  Mark Twain