Author Topic: What gun would you make or bring back? (Read 10220 times)

Empty Quiver · « **Reply #30 on:** April 07, 2012, 12:06:18 PM »

Quote from: mcwoodduck on April 07, 2012, 11:10:07 AM

Quote from: Empty Quiver on April 07, 2012, 07:40:23 AM
Quote from: Brett on April 07, 2012, 07:25:42 AM
Quote from: Empty Quiver on April 07, 2012, 07:09:19 AM
It may well bankrupt me but I would commission Gaston Glock to come up with a pistol that was not butt ugly.

Hitting a multi-million dollar lottery isn't miraculous enough for you now you want a GLOCK pistol that isn't butt ugly.?
Well I figure I'm on a roll having won the lottery.

Let's say a 1911 that will run a G17 into the dirt, or better yet a non railed, folded slide P-226 SIG that has a durable finish and can tolerate the abuse Glocks are known to absorb. You're right that is a bridge to far.
The Sig Pro 2009 and 2340 are the marrage of a P229 and a Glock 19.
Plastic, sorry ploymer frame, sig upper and reliable and accurate.
Like mine.

Oh, I have the SP-2340 and honestly it is probably the "best" mechanically of all the guns I own. Never a malfunction, and as accurate as I need. But lets be honest here (looking over my shoulder and in a hushed voice lest she hear me) FAT, FAT, I say not heavy exactly but fat. Like Rachel Ray wearing a down jacket.

As far as I know Gaston could do no better, might get a bit more capacity out of it though.He might not take ten years to acknowledge it existence and actually promote it, unlike SIG, it's as though they were ashamed to admit they made a plastic gun that was as good as the P series. Okay so maybe it has been done ... but not by Gaston.

JeffG · « **Reply #31 on:** April 08, 2012, 04:07:05 AM »

I want a stainless, fixed sight 3" K frame S&W 5 shot in 45 long Colt. The heavy barreled 3 inch would be a great CCW gun.

Dixiejack · « **Reply #32 on:** April 08, 2012, 04:58:20 AM »

Winchester .256 mag. with a 60 gr, HP bullet.

pre 64 Winchester 94 in .25-35.

early Winchester Model 9422M.

mcwoodduck · « **Reply #33 on:** April 08, 2012, 07:48:53 AM »

Quote from: JeffG on April 08, 2012, 04:07:05 AM

I want a stainless, fixed sight 3" K frame S&W 5 shot in 45 long Colt. The heavy barreled 3 inch would be a great CCW gun.

I wrote S&W about 10 years ago asking if they would make a 5 dhot 44 Special and 6 shot 357 magwith 3 and 4" barrels only I asked that they dove tail the frame for tritium night sights. They soon after came out with the L framed 696, but did not take all of my ideas.

ironglow · « **Reply #34 on:** April 08, 2012, 09:52:44 AM »

Sorry guys..I put hose rifles up...didn't notice this was a handgun forum..

mcwoodduck · « **Reply #35 on:** April 08, 2012, 11:28:44 AM »

Quote from: ironglow on April 08, 2012, 09:52:44 AM

Sorry guys..I put hose rifles up...didn't notice this was a handgun forum..

I think at this point it does not matter.

finisher · « **Reply #36 on:** April 12, 2012, 09:25:24 AM »

Quote from: JeffG on April 08, 2012, 04:07:05 AM

I want a stainless, fixed sight 3" K frame S&W 5 shot in 45 long Colt. The heavy barreled 3 inch would be a great CCW gun.

**********************************************
I was going to suggest this...really, I was!

Ex 49'er · « **Reply #37 on:** April 21, 2012, 09:57:58 PM »

A S&W M53 in 22 Jet w/.22lr extra cylinder. I'd love to see a S&W in .22 Hornet or .218 Bee. Get Ruger to make a run of .256 Hawkeye's. A 45LC S&W w/extra cylinder in .45 ACP.

Bill Ruger designed a .22 LR single shot that never got produced in favor of the Standard .22 Auto; now would be a good time to produce the single shot, If I won the lottery!

clum sum · « **Reply #38 on:** April 22, 2012, 02:28:30 PM »

Colt Woodsman match target second series, each barrel length. Smooth as silk.

KAYR1 · « **Reply #39 on:** April 22, 2012, 02:58:44 PM »

Some of my wishes would include:

1. Luger
2. Colt Python
3. Colt SAA
4. Browing Medalist

NickSS · « **Reply #40 on:** April 22, 2012, 11:12:44 PM »

I would like a luger in 45acp with a six inch barrel and artilery sights and detachable butt stock. I would also like a set of 1911 custom in 45, 38 super, 9X23, 9X19 and 22 LR all tuned and engraved.

Victor3 · « **Reply #41 on:** April 23, 2012, 12:41:02 AM »

A miniature Dardick in .22lr...

http://www.nramuseum.com/the-museum/the-galleries/the-new-prosperity/case-44-the-mother-of-invention-cartridge-technology/dardick-series-1500-pistol.aspx

This is my example of the 38 cal "tround" it fired...

Many moons ago I figured I'd revive and market the basic design in the form of a .22lr "Gatling" style gun. Even built a prototype.

mcwoodduck · « **Reply #42 on:** April 23, 2012, 03:20:20 AM »

I have wondered if a similar loading mech would work for a shotgun and allow you to simply dump rounds into a hopper like the trounds.

45-70.gov · « **Reply #43 on:** April 23, 2012, 04:25:30 AM »

Quote from: mcwoodduck on April 06, 2012, 04:23:23 PM

I have been waiting for someone to mention a Howda Pistol in modern Magnum cartridges like 44 Mag, 460 S&W, 475 Linbough, 45-70, and 500 S&W and rifles to match.

also

a drilling
ruger black hawk in 44mag and an octagon barrel........not a super black hawk

696 smith in 44mag....may as well be a 5 inch octagon too.....[5 shot ok]

as long as we are rich and dreaming
a gun bearer to follow me around
the drilling is for her day off

mcwoodduck · « **Reply #44 on:** April 23, 2012, 01:24:53 PM »

Quote from: 45-70.gov on April 23, 2012, 04:25:30 AM

the drilling is for her day off

Is that one of those double entandre things?

45-70.gov · « **Reply #45 on:** April 23, 2012, 01:55:04 PM »

3 barrels shotgun rifle combo

Kskybroom · « **Reply #46 on:** April 23, 2012, 06:34:12 PM »

Dan Wessen Supper Mags...

blaze · « **Reply #47 on:** April 24, 2012, 03:19:59 AM »

Colt Woodsman second series (all variations) and Colt Challengers with matching leather flap holsters - at affordable prices of course!!! That would make my day.

geartow · « **Reply #48 on:** April 24, 2012, 04:06:32 PM »

How about we bring back the good old fashioned CAP GUN so my boys can have a couple?

streak · « **Reply #49 on:** April 24, 2012, 05:31:01 PM »

Quote from: JeffG on April 08, 2012, 04:07:05 AM

I want a stainless, fixed sight 3" K frame S&W 5 shot in 45 long Colt. The heavy barreled 3 inch would be a great CCW gun.

That`s a "Big 10-4"!

mcwoodduck · « **Reply #50 on:** April 25, 2012, 03:55:56 AM »

Quote from: 45-70.gov on April 23, 2012, 01:55:04 PM

3 barrels shotgun rifle combo

I know what a drilling is.

BAGTIC · « **Reply #51 on:** May 02, 2012, 03:48:44 PM »

If it could be done a a reasonable price it would be the Colt Woodsman Match Target .22 L.R. pistol.

03A2 · « **Reply #52 on:** May 03, 2012, 02:33:52 PM »

I would contract ruger to design a 5 shot sa from the ground up around the .40 s&w. Short cylinder, no bigger than it had to be, theres a .41 special that everyone could feed.

temmi · « **Reply #53 on:** May 04, 2012, 10:44:58 AM »

480 Ruger Super Redhawk

ShootnStr8 · « **Reply #54 on:** May 04, 2012, 03:49:39 PM »

44 Auto Mag. If it was good enough for Dirty Harry.... I do like the idea of making brass from any 308/3006 based cartridge and then using common 44 cal bullets.

Blessings!

Shootnstr8

Empty Quiver · « **Reply #55 on:** May 04, 2012, 04:51:46 PM »

Quote from: ShootnStr8 on May 04, 2012, 03:49:39 PM

44 Auto Mag. If it was good enough for Dirty Harry.... I do like the idea of making brass from any 308/3006 based cartridge and then using common 44 cal bullets.

Blessings!

Shootnstr8

I believe Charlie Bronson was the Auto Mag guy. Same time, same genre, shoot, I may be wrong.

ShootnStr8 · « **Reply #56 on:** May 04, 2012, 06:52:46 PM »

Empty Quiver,

You are correct. Same time, same genre.

However, Bronson in Death Wish 3 used a .475 Wildey Magnum. That particular pistol is also chambered for the 44. AMP.

Eastwood fired a .44 AMP in the original Auto Mag in the 4th Dirty Harry movie Sudden Impact. BTW, I never understood the whole Sandra Locke/Eastwood thing!

Blessings!

Shootnstr8

Empty Quiver · « **Reply #57 on:** May 04, 2012, 06:59:23 PM »

Sometimes the other , um, well a fella ain't always in his right mind so to speak. No doubt she was a nice gal, but here professional skills left something to be desired. She was given ample opportunity. You know if you can't say something nice... I'll just close here.

1911crazy · « **Reply #58 on:** May 21, 2012, 09:47:09 AM »

1. Colt Python exactly like the 70's model incase they changed after that one.
2. Ruger Redhawk in 357 mag w/5 1/2'' & 71/2'' barrels in s/s
3. Ruger redhawk in 41magw/ 5 1/2'' & 7 1/2'' barrels in s/s
4. Ruger redhawk in 44mag w/9 1/2'' barrel in s/s orginal smaller frame redhawk not the super redhawk.
5. S&W 8 3/8" barreled N frame revolvers in nickel, blue or stainless

finisher · « **Reply #59 on:** May 21, 2012, 08:05:06 PM »

Quote from: 1911crazy on May 21, 2012, 09:47:09 AM

1. Colt Python exactly like the 70's model incase they changed after that one.
2. Ruger Redhawk in 357 mag w/5 1/2'' & 71/2'' barrels in s/s
3. Ruger redhawk in 41magw/ 5 1/2'' & 7 1/2'' barrels in s/s
4. Ruger redhawk in 44mag w/9 1/2'' barrel in s/s orginal smaller frame redhawk not the super redhawk.

*****************
I do believe that the lockwork of the early 70s Python is a bit different than that of 80s. Later version being maybe not as smooth, but I believe that they were all hand fitted right up to the end of production.