Author Topic: Loads & Bullets for 375 Winchester Super 14  (Read 567 times)

0 Members and 1 Guest are viewing this topic.

Offline Mark Borntrager

  • Trade Count: (0)
  • Member
  • *
  • Posts: 5
Loads & Bullets for 375 Winchester Super 14
« on: January 30, 2004, 04:05:19 AM »
I bought a 375 Winchester super 14 for a contender. I am looking for info for working up a good hunting load. I will mainly hunt mule deer and bear and will need a load capable of 200+ yards.
Thanks for the help!

Offline Bullseye

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1879
Loads & Bullets for 375 Winchester Supe
« Reply #1 on: January 30, 2004, 12:30:03 PM »
If you want 200+ yards, you bought the wrong caliber.  But for a load that is at a reasonable distance for that caliber, try Hornady 220 gr. FP's and IMR 4198 powder.

Offline Mark Borntrager

  • Trade Count: (0)
  • Member
  • *
  • Posts: 5
Opps!
« Reply #2 on: January 31, 2004, 02:46:28 PM »
Your sure are right! Boy, is my face red! I should have done a little more before asking that question .... and buying that barrel!

Offline Jim Stacy

  • Trade Count: (11)
  • Contributor
  • ***
  • Posts: 309
375 200/ winchester
« Reply #3 on: February 01, 2004, 06:18:02 AM »
I had a Ruger #3 Carbine in 375 and it shot the WW factory 200 gr load better than anything I could load for it . Not a cheap option but you can try that or you can send it to JD Jones and have him make a 375 JDJ out of it and get pretty close to your 200 yard range in power.

Offline ShootnStr8

  • Moderator
  • Trade Count: (1)
  • Contributor
  • *****
  • Posts: 280
Loads & Bullets for 375 Winchester Supe
« Reply #4 on: February 01, 2004, 04:20:20 PM »
Mark,

My thoughts were the same as Jim's concerning the JDJ option.  

However, I would recommend shooting a 375 JDJ before have work done.  While I've not shot one myself, I understand the recoil will get your attention and may be more than you want to experience.  

Certainly, talking with JD Jones and asking for his opinion about your situation would be worth the phone call.

Blessings!

ShootnStr8
There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus.
--Blaise Pascal

Offline flyfisher

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 187
  • Gender: Male
Loads & Bullets for 375 Winchester Supe
« Reply #5 on: February 02, 2004, 11:03:36 AM »
Here's a link I found and have used for .375 Win loads:

http://www.again.net/~steve/375p_3_220.html

Hope that it helps
How'd you like a peek at my 14-incher? (Contender, that is)