Author Topic: Remington! i need some help fellas  (Read 778 times)

0 Members and 1 Guest are viewing this topic.

Offline Angry Artexan

  • Trade Count: (0)
  • Member
  • *
  • Posts: 10
Remington! i need some help fellas
« on: May 17, 2012, 05:31:52 AM »
so i called remington today and they dont recommend running 00 buck through a modified choke only cylinder bore and imp cyl? is it just that guy not knowing what hes talking about and is full of it? or does he hold some ground? any help is appreciated >:(

Offline rfletcher

  • Trade Count: (7)
  • Member
  • *
  • Posts: 62
Re: Remington! i need some help fellas
« Reply #1 on: May 17, 2012, 12:30:59 PM »
"Remington's Guide to Shotguns and Shotshell Ammunition" on their website actually recommends full choke.  I just looked at the guide on the back of a box of Remington 3" OO and it recommends full choke as well.  My two boys and I patterned our shotguns last year for a shotgun only hunt.  With factory chokes two of the shotguns patterned best with factory full and the other with modified.  We then tried aTrulock extra full extended choke.  All three shotguns will put eight to ten pellets in a paper plate at 45 yds using Remington 3" OO with the rest just outside.  Since we have messed around with three or four other shotguns and all but the one shot tighter with full than modified.  Improved cylinder wasn't close in any of them.  In all of them the extended extra-full was much tighter.  Certain individual shotguns of ours will not shoot one brand of shell well with any choke but will shoot great with another brand.  With our patterning the Remingtons were best overall followed by Winchesters.  None of our guns liked the Federal Premium copper plated at all.  In the end you need to pattern your shotgun to find out what it shoots best.

Offline hillbill

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3285
Re: Remington! i need some help fellas
« Reply #2 on: May 17, 2012, 12:54:36 PM »
ive never heard it said that you should not use buck in full choke.call again tomorrow you will prob get a different answer! lol

Offline Angry Artexan

  • Trade Count: (0)
  • Member
  • *
  • Posts: 10
Re: Remington! i need some help fellas
« Reply #3 on: May 18, 2012, 03:46:54 AM »
well i called twice and got some one different but he said the same??? btw fletcher thats interesting. have you tried the buck kicker, pattern master or wad wizard? i hear good things about them

Offline rfletcher

  • Trade Count: (7)
  • Member
  • *
  • Posts: 62
Re: Remington! i need some help fellas
« Reply #4 on: May 18, 2012, 07:36:46 AM »
I have always had luck with Trulock chokes so when I wasn't satisfied with the patterns we were getting with the factory chokes I called them.  They recommended their extra-full so I ordered them.  I couldn't imagine patterns being any tighter or more uniform than what we are getting.  At half the price as the other popular chokes I couldn't be happier. 

Offline Angry Artexan

  • Trade Count: (0)
  • Member
  • *
  • Posts: 10
Re: Remington! i need some help fellas
« Reply #5 on: May 20, 2012, 03:27:05 AM »
thanks fletcher ill be sure to check them out

Offline charles p

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2374
  • Gender: Male
Re: Remington! i need some help fellas
« Reply #6 on: May 27, 2012, 08:19:24 AM »
When I hunted with dogs in the 70s, everyone used full choke shotguns.  Mine was a Model 1100 3" with a 30" full choke barrel.  Patterned very well with 00 and 000 buckshot.