« previous next »
Pages: [1]   Go Down

Author Topic: Favorite .35 cal rifle bullets  (Read 780 times)

0 Members and 1 Guest are viewing this topic.

Offline Lawyerman

  • Trade Count: (0)
  • Member
  • *
  • Posts: 21
Favorite .35 cal rifle bullets
« on: February 02, 2004, 09:45:25 AM »
What does everybody like in .35 cal rifle bullets? I have used the RCBS 200, the Saeco 250 and an NEI that runs about 280.

Anyone had good luck with the Lyman 358318 200's? I saw a four cav. the other day at a very good price but did not buy it, mistake?
Logged

Offline jhalcott

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1869
Favorite .35 cal rifle bullets
« Reply #1 on: February 02, 2004, 03:46:36 PM »
It usually is a mistake to pass on a "good deal"! If you can't really use it ,you can get more back in a trade.I know!! I've made a few of these mistakes myself! I have the 358318 and 358315 along with acouple others. The 200 grain bullets are mean coming out of the 358 jdj,haven't got to try them at 100 yds yet(weather&range repairs). Have not tried to chrono them yet either.they make great light plinking loads for the Whelen
 and I do not worry about velocity for plinking loads. If I can hit a cola bottle at 50 yds ,it's a good load.
Logged

Offline Johm D M

  • Trade Count: (0)
  • Member
  • *
  • Posts: 50
Favorite .35 cal rifle bullets
« Reply #2 on: February 04, 2004, 05:28:18 PM »
245 gr saeco, LY 38625 are two that shoot well in my guns. LBT 180 fn in the 356 has to be singlely loaded but groups ok. Gianni.
Logged

Offline Leftoverdj

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1398
Favorite .35 cal rifle bullets
« Reply #3 on: February 05, 2004, 10:11:23 AM »
I have a Lyman 358315 two cavity. Adequate, but not outstanding is my opinion. I dislike the lack of a meplat and the amount of unsupported nose seems excessive. Accuracy is acceptable but not tackdriving.

I may be overly fussy, but I am gonna get in on the group buy 180 that's brewing or use the design/order feature of Mountain Moulds to get Dan to cut a 200 grainer that fits my notions.
Logged
It is the duty of the good citizen to love his country and hate his gubmint.

Offline Orygun Mark

  • Trade Count: (0)
  • Member
  • *
  • Posts: 41
Favorite .35 cal rifle bullets
« Reply #4 on: February 05, 2004, 05:10:47 PM »
I have 2-336's in 35 Rem and a 14" T/C. I have the RCBS 35-200 which is my favorite. The saeco 245 works good also. The Lyman 358315 and 318 shoot so-so. A Herters 35-200 PB GC is only good for 50 yard shooting. I like the 358430 195 gr PB much better than the Herters. The 35-200, Saeco 245 and 358430 all engrave the rifling in the 336's. In the T/C they don't engrave unless I load them longer than they will go thru the 336 action.   Mark
Logged

Offline hammerhead357

  • Trade Count: (0)
  • Member
  • *
  • Posts: 37
best 35 cal. mould
« Reply #5 on: February 25, 2004, 04:12:29 PM »
I don't know how I missed this post for so long. I have been trying to find a Lyman 358318 mould for about a year or more.  JHALCOTT would you send me samples if I send you $$??? I have a 200 gr. Saeco that works in the 35 Rem. contender for me but I have been wanting a 250 or so for a 35 Whelen project for a long time.  Thanks Wes
Logged

Offline Robert

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1618
I'm looking for a 250 also
« Reply #6 on: February 25, 2004, 08:36:31 PM »
and it is also for a Whelen.  I'm thinking of something with considerable bearing surface.  Like leftoverdj suggested, I don't want a lot of unsupported nose.  I had a problem with the 250 gr jacketed Hornady roundnoses keyholing.  They have less than 1/3 of the length bearing surface. The entire 2/3 ahead of the cannelure is tapered smaller than .358.  No small wonder why they are unstable.
Logged
....make it count
Pages: [1]   Go Up
« previous next »