Author Topic: Primitive Furniture, Don't mess wit da Zulu!  (Read 2098 times)

0 Members and 1 Guest are viewing this topic.

Offline Alan R McDaniel Jr

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 122
Primitive Furniture, Don't mess wit da Zulu!
« on: July 23, 2012, 02:20:39 PM »
I post up some pictures when I get started on the bench.


I cut some Red Oak slabs this weekend 5 feet long and 18" wide and 3" thick to make a bench like Zulu shows in "Primitive Furniture".  They started out at 5" thick but I couldn't pick them up to load them in the truck.  I had to take them down to 3" and can barely handle them by myself now.  After the bench is built I'll have to get some help to move it.  Zulu must be built like The Hulk! 


Alan


Offline blind ear

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4156
  • Gender: Male
    • eddiegjr
Re: Primitive Furniture, Don't mess wit da Zulu!
« Reply #1 on: July 23, 2012, 09:11:39 PM »
where is the "primitive furniture" forum? ear
Oath Keepers: start local
-
“It is no coincidence that the century of total war coincided with the century of central banking.” – Ron Paul, End the Fed
-
An economic crash like the one of the 1920s is the only thing that will get the US off of the road to Socialism that we are on and give our children a chance at a future with freedom and possibility of economic success.
-
everyone hears but very few see. (I can't see either, I'm not on the corporate board making rules that sound exactly the opposite of what they mean, plus loopholes) ear
"I have seen the enemy and I think it's us." POGO
St Judes Childrens Research Hospital

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26944
  • Gender: Male


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline blind ear

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4156
  • Gender: Male
    • eddiegjr
Re: Primitive Furniture, Don't mess wit da Zulu!
« Reply #3 on: July 24, 2012, 08:14:12 AM »
Thank ya GB. Great lookin furniture. ear
Oath Keepers: start local
-
“It is no coincidence that the century of total war coincided with the century of central banking.” – Ron Paul, End the Fed
-
An economic crash like the one of the 1920s is the only thing that will get the US off of the road to Socialism that we are on and give our children a chance at a future with freedom and possibility of economic success.
-
everyone hears but very few see. (I can't see either, I'm not on the corporate board making rules that sound exactly the opposite of what they mean, plus loopholes) ear
"I have seen the enemy and I think it's us." POGO
St Judes Childrens Research Hospital

Offline leesecw

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 268
  • Gender: Male
Re: Primitive Furniture, Don't mess wit da Zulu!
« Reply #4 on: July 24, 2012, 12:41:43 PM »
Zulu must be a hobbit

If Guns cause crime, then mine are defective...Ted Nugent

Offline Zulu

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2477
  • Honor is a gift a man gives himself.
    • Wood & Ironworks
Re: Primitive Furniture, Don't mess wit da Zulu!
« Reply #5 on: July 28, 2012, 10:39:27 AM »
Yeah!  I'm a mean machine! :o :o
Actually, the stuff was pretty heavy.  But I still managed to do it by myself.  I started out with 8' long pieces and cut 2' off each side with a skill saw.  I had to cut one side, flip it and cut the other side, then clean the middle of the cut with a sawsall.  The 2' pieces became the legs.
Alan,
Can't wait to see your pictures.
Hercules Zulu
Zulu's website
www.jmelledge.com

Offline Alan R McDaniel Jr

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 122
Re: Primitive Furniture, Don't mess wit da Zulu!
« Reply #6 on: August 03, 2012, 04:07:13 PM »

Mine is not as woodsy looking as Zulu's.  I still have to make the pegs and sand it all down.  I think I will finish it with Spar varnish when I'm done. 


Alan


Offline blind ear

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4156
  • Gender: Male
    • eddiegjr
Re: Primitive Furniture, Don't mess wit da Zulu!
« Reply #7 on: August 03, 2012, 04:22:29 PM »

Mine is not as woodsy looking as Zulu's.  I still have to make the pegs and sand it all down.  I think I will finish it with Spar varnish when I'm done. 


Alan

It's gonna look "fine!" ear
Oath Keepers: start local
-
“It is no coincidence that the century of total war coincided with the century of central banking.” – Ron Paul, End the Fed
-
An economic crash like the one of the 1920s is the only thing that will get the US off of the road to Socialism that we are on and give our children a chance at a future with freedom and possibility of economic success.
-
everyone hears but very few see. (I can't see either, I'm not on the corporate board making rules that sound exactly the opposite of what they mean, plus loopholes) ear
"I have seen the enemy and I think it's us." POGO
St Judes Childrens Research Hospital

Offline Zulu

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2477
  • Honor is a gift a man gives himself.
    • Wood & Ironworks
Re: Primitive Furniture, Don't mess wit da Zulu!
« Reply #8 on: August 04, 2012, 04:36:50 AM »
Alan,
Looks great!
Here is how I did my pegs.
Zulu
 

 
Zulu's website
www.jmelledge.com

Offline Alan R McDaniel Jr

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 122
Re: Primitive Furniture, Don't mess wit da Zulu!
« Reply #9 on: August 04, 2012, 04:15:39 PM »
In retrospect, I should have done something like that but I cut two larger rectangular holes that I could drop a wedge into and tap it in to tighten things up.  Maybe I'll have a chance to do a bit more work on it tomorrow. 


Alan


Offline Zulu

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2477
  • Honor is a gift a man gives himself.
    • Wood & Ironworks
Re: Primitive Furniture, Don't mess wit da Zulu!
« Reply #10 on: August 05, 2012, 12:56:13 AM »
Those in the picture have to be tapped in.  The round part fits the hole fine.  The head wedges against the leg just enough that it needs to be tapped in with a mallet.  Nothing moves at all when everything is installed..
Zulu
Zulu's website
www.jmelledge.com