Author Topic: Encore Stock......Really Mad (Read 2510 times)

Swampman · « **on:** August 18, 2012, 02:02:22 AM »

I bought an Encore because I wanted a muzzleloader with a walnut stock. It was used but in perfect condition. I mounted the scope on it yesterday. I had it out on the back porch looking through the scope this morning and now it has a 1.5" crack in the wrist of the stock and I haven't even fired it. John Barsness stated in a recent article on single shots that he'd gone over to composite on these because the walnut buttstocks crack. I hate to sell it, but if I am going to have use a plastic stock I'll just buy an Impact.

luckydawg13 · « **Reply #1 on:** August 18, 2012, 02:28:48 AM »

send it back they will replace it i sent 2 stocks back to them
on one the sling std screw pulled out on my Omega TC sent me a new stock
i drooped my 22 classic stock it cracked in half sent it back
sent me a new one

yooper77 · « **Reply #2 on:** August 18, 2012, 04:25:43 AM »

Send it in, they will replace it.

I sent in a walnut pistol grip after it cracked from my 15" 454 Casull barrel and they replaced it.

I currently use synthetic standard rifle stock, (cut down) synthetic standard stock for my daughter and also a synthetic thumbhole stock which all have Limbsaver pads with synthetic standard forends for my 209x50 and 223 Remington barrels since they have checkering which I like, but I use Pachmayr grip and magnum forend for my 338 Federal barrel.

yooper77

hoghunting · « **Reply #3 on:** August 22, 2012, 10:42:58 AM »

Just exactly how do you mount your scopes? You said the stock was used but in perfect condition, then you mounted the scope, now the stock has a 1.5" crack in the wrist. Might be time for someone else to do your gunsmithing.

Even after S&W bought T/C, they still have a pretty good customer service policy and they will replace the stock.

Swampman · « **Reply #4 on:** August 22, 2012, 11:14:49 AM »

Since I do gunsmithing everyday I doubt I cracked it. It's on it's way back. Hopefully the replacement won't crack as this seems to be a trend.

Buckskin · « **Reply #5 on:** August 22, 2012, 03:09:51 PM »

Mine came with a plastic pos stock and I replaced it with pepper laminate furnature because I too had heard of that issue. While walnut is of course a classic, the stuff they put on Encores has no character what so ever, so the laminate actually looks better. And I don't have to worry about having it crack... It also took a lot of the wallop out of the 50 cal heavy loads.

hunt-m-up · « **Reply #6 on:** August 22, 2012, 03:11:30 PM »

Quote from: hoghunting on August 22, 2012, 10:42:58 AM

Just exactly how do you mount your scopes? You said the stock was used but in perfect condition, then you mounted the scope, now the stock has a 1.5" crack in the wrist. Might be time for someone else to do your gunsmithing.

Even after S&W bought T/C, they still have a pretty good customer service policy and they will replace the stock.

Gotta wonder don't you, usually takes recoil or something serious to crack a stock.

Swampman · « **Reply #7 on:** August 22, 2012, 04:02:00 PM »

If I have to carry the extra weight of a laminate stock, I'll resort to another muzzleloader. The Encore is already heavy. I suspect the .375H&H barrel it had on it when I bought it was too much for the walnut stock. Our very high humidity isn't the best thing for wood stocks either. The crack is right along the grain. It appears to be a common problem.

Buckskin · « **Reply #8 on:** August 22, 2012, 04:25:09 PM »

Yeah it's a kinda heavy, but not that bad. I lugged it around at +10k feet chasing mule deer in Colorado. The thing that bugged me about it for that trip is that it didn't shoot conicals all that great. Sabots are definately the ticket for Encores.

Swampman · « **Reply #9 on:** September 06, 2012, 11:44:20 AM »

They called today and said they don't make that buttstock anymore. They are sending me a black tupperware buttstock. Not really what I wanted, but it will get me through the season.

Ladobe · « **Reply #10 on:** September 06, 2012, 03:23:10 PM »

That really sucks Mark.

Amazes me when I see comments like this. I made in through 40 odd years of using TC Contenders, Encores and traditional muzzle loaders... a h*ll of lot of them and shot a h*ll of lot, and never had the problems some folks seem to have.

uno676 · « **Reply #11 on:** September 11, 2012, 04:17:21 PM »

Quote from: Buckskin on August 22, 2012, 04:25:09 PM

Yeah it's a kinda heavy, but not that bad. I lugged it around at +10k feet chasing mule deer in Colorado. The thing that bugged me about it for that trip is that it didn't shoot conicals all that great. Sabots are definately the ticket for Encores.

I live in Colorado and I bought the encore thinking it was a a++ gun but I have had the same problem with conicals the accuracy is in the trash can and in Colorado you can't hunt with sabots. I keep thinking I'll figure the secret out but no luck yet. I also wanted walnut but couldn't find one had to settle for the flex tech stock in black.

Sent by passenger pigeon using Tapatalk KD0SOK

hunt-m-up · « **Reply #12 on:** September 12, 2012, 01:54:00 AM »

Quote from: uno676 on September 11, 2012, 04:17:21 PM

Quote from: Buckskin on August 22, 2012, 04:25:09 PM
Yeah it's a kinda heavy, but not that bad. I lugged it around at +10k feet chasing mule deer in Colorado. The thing that bugged me about it for that trip is that it didn't shoot conicals all that great. Sabots are definately the ticket for Encores.
I live in Colorado and I bought the encore thinking it was a a++ gun but I have had the same problem with conicals the accuracy is in the trash can and in Colorado you can't hunt with sabots. I keep thinking I'll figure the secret out but no luck yet. I also wanted walnut but couldn't find one had to settle for the flex tech stock in black.

What conicals have you tried? Pellets or loose powder?

Sent by passenger pigeon using Tapatalk KD0SOK

uno676 · « **Reply #13 on:** September 12, 2012, 03:16:05 AM »

Power belts 295gr and I tried some lead maxi hunters. I use triple 7 loose powder and I have tried blackhorn 209. We can't use pellets in Co.

Sent by passenger pigeon using Tapatalk KD0SOK

Buckskin · « **Reply #14 on:** September 12, 2012, 04:39:21 AM »

Quote from: uno676 on September 11, 2012, 04:17:21 PM

Quote from: Buckskin on August 22, 2012, 04:25:09 PM
Yeah it's a kinda heavy, but not that bad. I lugged it around at +10k feet chasing mule deer in Colorado. The thing that bugged me about it for that trip is that it didn't shoot conicals all that great. Sabots are definately the ticket for Encores.
I live in Colorado and I bought the encore thinking it was a a++ gun but I have had the same problem with conicals the accuracy is in the trash can and in Colorado you can't hunt with sabots. I keep thinking I'll figure the secret out but no luck yet. I also wanted walnut but couldn't find one had to settle for the flex tech stock in black.

Sent by passenger pigeon using Tapatalk KD0SOK

I had the same issue and found that the Thor 250gr bullets with 130gr BH 209 gave me nice groups out to 300 yards. Not as good as the Barnes Spitfires though, so as soon as I got back from Colorado I went back to them...

Sorry for hijacking post...

muznut 54 · « **Reply #15 on:** September 12, 2012, 05:34:47 AM »

Cut off the bullet guide and have the barrel re crowned. They are to deep for big conicals and some are not aligned properly.

uno676 · « **Reply #16 on:** September 12, 2012, 06:40:13 AM »

Thanks for the help didn't mean to hijack the thread. I'll try those thor bullets.

Sent by passenger pigeon using Tapatalk KD0SOK

sweetwyominghome · « **Reply #17 on:** September 16, 2012, 08:19:31 AM »

buckskin wrote: " laminate actually looks better. And I don't have to worry about having it crack."
---
Laminate WILL indeed crack. The Contender thumbholes in nutmeg once sold by Eben Brown had a fairly high rate of returns because of such. One of my High Plains thumbholes cracked. It was mounted properly, not overtightened and on a mild caliber -- and yet it developed a hairline crack (fixed by HP, by the way).

Swampman · « **Reply #18 on:** September 16, 2012, 08:55:52 AM »

Still no sign of my stock. I may have to buy one to get through the season.

Buckskin · « **Reply #19 on:** September 17, 2012, 03:16:48 AM »

Quote from: sweetwyominghome on September 16, 2012, 08:19:31 AM

buckskin wrote: " laminate actually looks better. And I don't have to worry about having it crack."
---
Laminate WILL indeed crack. The Contender thumbholes in nutmeg once sold by Eben Brown had a fairly high rate of returns because of such. One of my High Plains thumbholes cracked. It was mounted properly, not overtightened and on a mild caliber -- and yet it developed a hairline crack (fixed by HP, by the way).

Well, then they are of poor quality... I have had a thumbhole on my 300 RUM for years, regularily use it in a lead sled for load development and good as the day I bought it. Also on my Encore ML.

Swampman · « **Reply #20 on:** September 17, 2012, 04:20:34 AM »

If it will survive a lead sled it will never break.

sobeit · « **Reply #21 on:** September 22, 2012, 03:24:29 PM »

Single shot collector....examined many contender/encore walnut stocks. Found that approx.20% have a crack on top behind the receiver where it mates to wood. What I believe causes this is not holding the receiver to keep it from turning in the wood when torquing the socket head thru bolt. You can actually see this happen...insert allen wrench , add a little righty-tighty and watch the receiver twist in the wood.

mirage1988 · « **Reply #22 on:** September 22, 2012, 04:34:49 PM »

Quote from: sobeit on September 22, 2012, 03:24:29 PM

Single shot collector....examined many contender/encore walnut stocks. Found that approx.20% have a crack on top behind the receiver where it mates to wood. What I believe causes this is not holding the receiver to keep it from turning in the wood when torquing the socket head thru bolt. You can actually see this happen...insert allen wrench , add a little righty-tighty and watch the receiver twist in the wood.

Sounds then like you could crack the stock mounting a scope if you were to put the stock in a vise and torque the base down on the barrel?

Swampman · « **Reply #23 on:** September 23, 2012, 12:29:45 AM »

This is a common problem. It's because the wood is paper thin in that area.

luckydawg13 · « **Reply #24 on:** September 23, 2012, 08:51:37 AM »

Quote from: Swampman on September 06, 2012, 11:44:20 AM

They called today and said they don't make that buttstock anymore. They are sending me a black tupperware buttstock. Not really what I wanted, but it will get me through the season.

they dont have a walnut stock to replace dang that sucks it would be nice it they
would send you a new forend to match