« previous next »
Pages: [1]   Go Down

Author Topic: 357 max dies  (Read 939 times)

0 Members and 2 Guests are viewing this topic.

Offline LaDano

  • GBO Supporter
  • Trade Count: (13)
  • Contributor
  • *****
  • Posts: 329
  • Gender: Male
357 max dies
« on: September 04, 2012, 06:39:40 PM »
Is there a difference between the 357mag & 357max dies? I have a 357max barrel on its way and I want to get my ducks in a row soon.

Thanx
Logged
Sporter 7X57 Mauser
Sporter 30-06 Mauser
Original M38 6.5X55 Swede
Marlin 30-30
AR-15 .223
AR-15 300aac
Ruger 44 carbine

Offline Ranger99

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 9581
Re: 357 max dies
« Reply #1 on: September 04, 2012, 07:07:17 PM »
i dunno. . . . .


i would think you would be able
to do everything except full-length resize.
(i think)
(maybe)


i'm sure one of these guys here that has
a max can tell you better than i can.


i've not loaded for or owned a max
(yet) ;D
Logged
18 MINUTES.  . . . . . .

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: 357 max dies
« Reply #2 on: September 04, 2012, 07:28:25 PM »
You can full length resize with mag set. The seating die wont screw in press very far but it works
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline LaDano

  • GBO Supporter
  • Trade Count: (13)
  • Contributor
  • *****
  • Posts: 329
  • Gender: Male
Re: 357 max dies
« Reply #3 on: September 04, 2012, 07:54:01 PM »
So I can get by with the mad dies if I don't come by a Mac. I just looked around on RCBS's site and it seems like they are the same. They didn't list a different die set for each. I'm excited to get this together for my son, can't wait to see his face when he finds out.

Thanx
Logged
Sporter 7X57 Mauser
Sporter 30-06 Mauser
Original M38 6.5X55 Swede
Marlin 30-30
AR-15 .223
AR-15 300aac
Ruger 44 carbine

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: 357 max dies
« Reply #4 on: September 04, 2012, 11:32:53 PM »
MOST, 357 Mag dies will load a 357 maximum just fine.

If any doubt, contact the manufacturer of the dies.

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline LaDano

  • GBO Supporter
  • Trade Count: (13)
  • Contributor
  • *****
  • Posts: 329
  • Gender: Male
Re: 357 max dies
« Reply #5 on: September 05, 2012, 12:15:41 AM »
Great, Thanx.
Logged
Sporter 7X57 Mauser
Sporter 30-06 Mauser
Original M38 6.5X55 Swede
Marlin 30-30
AR-15 .223
AR-15 300aac
Ruger 44 carbine

Offline USSColorado

  • Trade Count: (0)
  • Member
  • *
  • Posts: 15
Re: 357 max dies
« Reply #6 on: September 05, 2012, 05:25:56 AM »
With a straight wall case, the shorter dies work for the longest rounds.  (.38 special for .357 mag, .357 max.)  (.32 S&w for .32 acp, .32 s&w long, .32 mag, .327 Federal.)
Logged
The right to keep and bear 16 inch guns shall not be infringed.

The bigger they are, the more the bullets expand.

Offline LaDano

  • GBO Supporter
  • Trade Count: (13)
  • Contributor
  • *****
  • Posts: 329
  • Gender: Male
Re: 357 max dies
« Reply #7 on: September 05, 2012, 05:54:30 AM »
I kinda figured that, it made sense. I just wanted to b sure before I bought a set.


Thanx again
Logged
Sporter 7X57 Mauser
Sporter 30-06 Mauser
Original M38 6.5X55 Swede
Marlin 30-30
AR-15 .223
AR-15 300aac
Ruger 44 carbine

Offline YRUpunting?

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 1013
Re: 357 max dies
« Reply #8 on: September 05, 2012, 06:12:38 AM »
I don't think the Lee 38 spl set will work with the Max.  If you go Lee I believe you will need the 357 Mag set. 
Logged

Offline LaDano

  • GBO Supporter
  • Trade Count: (13)
  • Contributor
  • *****
  • Posts: 329
  • Gender: Male
Re: 357 max dies
« Reply #9 on: September 05, 2012, 06:38:48 AM »
I'm trying to keep all my dies RCBS. Thanx for the tip though, much appreciated.
Logged
Sporter 7X57 Mauser
Sporter 30-06 Mauser
Original M38 6.5X55 Swede
Marlin 30-30
AR-15 .223
AR-15 300aac
Ruger 44 carbine

Offline kingj

  • GBO Supporter
  • Trade Count: (53)
  • Avid Poster
  • *****
  • Posts: 208
  • Gender: Male
Re: 357 max dies
« Reply #10 on: September 05, 2012, 09:24:35 AM »
I have a set of Hornady's that I have loaded hundreds of max. with.
The box states .38 spl. 357 mag .357 max.
Logged
Character 24 hours a day 7 days a week !

Life Member NRA
.357 Handi
.35 Handi

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: 357 max dies
« Reply #11 on: September 05, 2012, 10:39:47 AM »
Quote from: LaDano on September 05, 2012, 06:38:48 AM
I'm trying to keep all my dies RCBS. Thanx for the tip though, much appreciated.

I have three sets of 357 Mag dies, a newer Redding carbide, a 25 year old RCBS carbide and a 40 year old Lyman All American steel die set. ALL load 357 Maxi just fine.

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline USSColorado

  • Trade Count: (0)
  • Member
  • *
  • Posts: 15
Re: 357 max dies
« Reply #12 on: September 05, 2012, 06:24:09 PM »
Quote from: LaDano on September 05, 2012, 06:38:48 AM
I'm trying to keep all my dies RCBS. Thanx for the tip though, much appreciated.
Huh.  I regret every RCBS die set I bought, and wish I had bought Lee dies from the get-go.  More features for less money.
Logged
The right to keep and bear 16 inch guns shall not be infringed.

The bigger they are, the more the bullets expand.

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: 357 max dies
« Reply #13 on: September 05, 2012, 06:59:17 PM »
"I regret every RCBS die set I bought"

Really? Kind of harsh, since RCBS has a very good reputation.

I have RCBS, Hornady, Lee, Redding, Forster and 1 Lyman die. I do not regret buying any of them. I know 1 thing, if I ever have a problem with an RCBS die, it will be taken care of promptly and at no cost. They have done it for me, even though I told them it was my fault. I can not say the same about a Lee die. I have bought Lee dies, when I could not get others and I felt, I just had to have it now. But I know I am taking a chance too. Some times you get what you pay for. Don't get me wrong, I really like the Lee Collet dies, but I know that if something goes wrong with a Lee die, it is on me.

Maybe it is just me, but there just seems to be a smoothness about the better (more expensive) dies, that the Lee dies just do not seem to have. But that is my opinion, others will vary. Usually, when I go cheap, I later regret the decision...not always, but enough to make me really think about it a lot before buying the cheapest in the future. So, I do not let price drive my decisions, it is considered, but not the be all, end all answer.

Good Luck and Good Shooting
Logged
Great men have vision and resolve to make dreams come true.

Offline Doublebass73

  • GBO Supporter
  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 4579
Re: 357 max dies
« Reply #14 on: September 06, 2012, 06:05:06 PM »
Quote from: YRUpunting? on September 05, 2012, 06:12:38 AM
I don't think the Lee 38 spl set will work with the Max.  If you go Lee I believe you will need the 357 Mag set.

I load 357 Max with a 38 Special Lee die set.
Logged
"Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves."

---- William Pitt (the Younger), Speech in the House of Commons, November 18, 1783

Offline LaDano

  • GBO Supporter
  • Trade Count: (13)
  • Contributor
  • *****
  • Posts: 329
  • Gender: Male
Re: 357 max dies
« Reply #15 on: September 06, 2012, 06:34:29 PM »
I'm in the market for a set. I fell asleep when the maxi set died on eBay yesterday.
Logged
Sporter 7X57 Mauser
Sporter 30-06 Mauser
Original M38 6.5X55 Swede
Marlin 30-30
AR-15 .223
AR-15 300aac
Ruger 44 carbine

Offline watkibe

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 259
Re: 357 max dies
« Reply #16 on: September 07, 2012, 06:22:12 PM »
I contacted Lee, my preferred reloading equipment maker. They said my current 357 die set would work fine for 38 Special, 357 Magnum, and 357 Maximum.
There ya go, from the horse's mouth !
 
Logged

Offline LaDano

  • GBO Supporter
  • Trade Count: (13)
  • Contributor
  • *****
  • Posts: 329
  • Gender: Male
Re: 357 max dies
« Reply #17 on: September 07, 2012, 06:24:40 PM »
Thanx, I'm bidding on another set now.
Logged
Sporter 7X57 Mauser
Sporter 30-06 Mauser
Original M38 6.5X55 Swede
Marlin 30-30
AR-15 .223
AR-15 300aac
Ruger 44 carbine
Pages: [1]   Go Up
« previous next »