« previous next »
Pages: [1]   Go Down

Author Topic: h&r TRIGGERS?  (Read 559 times)

0 Members and 1 Guest are viewing this topic.

Offline shinjin

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 215
  • Gender: Male
  • Robin Martin, retired LEO, CEO Public Safety Agenc
h&r TRIGGERS?
« on: October 15, 2012, 04:34:57 AM »
I finally got to shoot the 22-250 barrel on my SB2 frame. WOW! what a tack driver! But the trigger was so gritty no matter what I tried my groups would pull off to the right by 2 inches at 25 yards. Though I consider a 10 shot sub 1 inch group acceptable I would like to know that at 100 yards and out I am not going to need a 2 MOA correction.
 
Is there a way (or a gifted gunsmith) to work these shotgun style triggers?
 
Or is there a replacement trigger I can buy?
 
Group size wise that little crack barrel shot better than my 22-250 AI mauser!
 
Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: h&r TRIGGERS?
« Reply #1 on: October 15, 2012, 05:19:11 AM »
Hi,
 
Link below is from the H&R FAQs sticky thread and will walk you through a DIY trigger job.  There is other information in the FAQs sticky on improving a handi trigger, reading the FAQs, even if you don't do the work yourself, would be a good start on improving you rifle.  I believe that you can send your receiver to H&R for trigger work but you should verify that as I have never sent on in. 
 
BB
 
http://perkloafm.com/
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43304
  • Gender: Male
Re: h&r TRIGGERS?
« Reply #2 on: October 15, 2012, 05:42:59 AM »
H&R will do trigger jobs too, see "Ilion Trigger Policy" in the FAQs.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bucmeister

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 158
  • Gender: Male
Re: h&r TRIGGERS?
« Reply #3 on: October 15, 2012, 06:03:08 AM »
Can verify that mine is at the factory for a trigger job as I type.  If fact I am hoping to be getting it back in the next week or two since it shipped out on Sept 26th.
Logged
Pages: [1]   Go Up
« previous next »